México

The gross nutrient balances (N and P) are calculated as the difference between the total quantity of nutrient inputs entering an agricultural system (mainly fertilizers, livestock manure), and the quantity of nutrient outputs leaving the system (mainly uptake of nutrients by crops and grassland). Gross nutrient balances are expressed in tonnes of nutrient surplus (when positive) or deficit (when negative). This calculation can be used as a proxy to reveal the status of environmental pressures, such as declining soil fertility in the case of a nutrient deficit, or for a nutrient surplus the risk of polluting soil, water and air. The nutrient balance indicator is also expressed in terms of kilogrammes of nutrient surplus per hectare of agricultural land to facilitate the comparison of the relative intensity of nutrients in agricultural systems between countries.

The BP Statistical Review of World Energy has provided high-quality, objective and globally consistent data on world energy markets. The Review is one of the most widely respected and authoritative publications in the field of energy economics, used for reference by the media, academia, world governments and energy companies. A new edition is published every June. Historical data from 1965 for many sections. Note:  1. For the below indicators "Converted data from Exajoules to Million tonnes ((Exajoules value *23884589.66)/1000000)=Million tonnes" Coal Consumption, Million tonnes oil equivalent Coal Production, Million tonnes oil equivalent Natural gas Consumption, Million tonnes oil equivalent Natural gas Production, Million tonnes oil equivalent Hydroelectricity Consumption, Million tonnes oil equivalent Nuclear energy Consumption, Million tonnes oil equivalent Oil Consumption, Million tonnes oil equivalent Primary energy Consumption, Million tonnes oil equivalent Primary Energy Consumption by fuel: Coal, Million tonnes oil equivalent Primary Energy Consumption by fuel: Oil, Million tonnes oil equivalent Primary Energy Consumption by fuel: Natural Gas, Million tonnes oil equivalent Primary Energy Consumption by fuel: Nuclear Energy, Million tonnes oil equivalent Primary Energy Consumption by fuel: Hydro electric, Million tonnes oil equivalent Primary Energy Consumption by fuel: Renewables, Million tonnes oil equivalent Primary Energy Consumption by fuel: Total Consumption, Million tonnes oil equivalent Renewable Consumption, Million tonnes oil equivalent Renewables Consumption - Solar, Million tonnes oil equivalent Renewables Consumption - Wind, Million tonnes oil equivalent Renewables Consumption - Geothermal, Biomass and Other, Million tonnes oil equivalent 2. For the below indicator "Converted data from Petajoules to Thousand tonnes ((Petajoules Values* 23884.58966275)/1000)=Thousand tonnes" Renewable energy - Bio-fuels Production, Thousand tonnes of oil equivalent

Consumption-based accounting (CBA) of emissions (also known as carbon footprints) accounts for emissions associated with imported and exported goods. CBA reports the total emissions associated with final demand in each country. Production-based accounting (PBA) -accounts for  physically occurring emissions in a country or territorial emissions. 

The dataset presents estimates of air emissions 'embodied' in products (goods and services) for final use - also sometimes referred to as 'footprints'. The estimates are the results of environmental input-output modelling for the aggregated EU-27 economy. The model estimations are based on two main data sets: 1) ESA supply, use and input–output tables (consolidated tables - naio_agg_60) and 2) air emissions accounts (env_ac_ainah_r1). Data is published in two tables as part of the air emissions accounts database: table env_ac_io presents data for years 2000-2007 using CPA 2002 classification; table env_ac_io2 covers years 2008 and 2009 in CPA 2008 breakdown. The underlying modelling assumes that the production technology in the rest of the world economy is the same as in the EU-27. Hence, the estimated 'embodied' emissions in the rest of the world constitute rather emissions avoided in the EU-27 production system. For carbon dioxide the difference between 'avoided in EU-27' and 'actually emitted in rest of the world' is most likely smaller than for other pollutants such as sulfur dioxide for which very efficient 'abatement-technologies' were introduced in the European Union.

The dataset presents estimates of air emissions 'embodied' in products (goods and services) for final use - also sometimes referred to as 'footprints'. The estimates are the results of environmental input-output modelling for the aggregated EU-27 economy. The model estimations are based on two main data sets: 1) ESA supply, use and input–output tables (consolidated tables - naio_agg_60) and 2) air emissions accounts (env_ac_ainah_r1). Data is published in two tables as part of the air emissions accounts database: table env_ac_io presents data for years 2000-2007 using CPA 2002 classification; table env_ac_io2 covers years 2008 and 2009 in CPA 2008 breakdown. The underlying modelling assumes that the production technology in the rest of the world economy is the same as in the EU-27. Hence, the estimated 'embodied' emissions in the rest of the world constitute rather emissions avoided in the EU-27 production system. For carbon dioxide the difference between 'avoided in EU-27' and 'actually emitted in rest of the world' is most likely smaller than for other pollutants such as sulfur dioxide for which very efficient 'abatement-technologies' were introduced in the European Union.

The Global Carbon Project facilitates access to data to encourage its use and promote a good understanding of the carbon cycle. Respecting original data sources is key to help secure the support of data providers to enhance, maintain and update valuable data. 

Direct greenhouse gases: Carbon Dioxide (CO2), Methane (CH4), Nitrous Oxide (N2O), Hydrofluorocarbons (HFC-23, 32, 125, 134a, 143a, 152a, 227ea, 236fa, 245fa, 365mfc, 43-10-mee), Perfluorocarbons (PFCs: CF4, C2F6, C3F8, c-C4F8, C4F10, C5F12, C6F14, C7F16), Sulfur Hexafluoride (SF6), Nitrogen Trifluoride (NF3) and Sulfuryl Fluoride (SO2F2). Emissions are calculated by individual countries using country-specific information. The countries are organized in different world regions for illustration purposes. Emissions of some small countries are presented together with other countries depending on country definition and availability of activity statistics. Source: European Commission, Joint Research Centre (JRC)/PBL Netherlands Environmental Assessment Agency.

FAO - GLEAM Global greenhouse gas emissions from livestock summary data (2017)

This dataset presents trends in man-made emissions of major greenhouse gases and emissions by gas.   Data refer to total emissions of CO2 (emissions from energy use and industrial processes, e.g. cement production), CH4 (methane emissions from solid waste, livestock, mining of hard coal and lignite, rice paddies, agriculture and leaks from natural gas pipelines), nitrous oxide (N2O), hydrofluorocarbons (HFCs), perfluorocarbons (PFCs), sulphur hexafluoride (SF6) and nitrogen trifluoride (NF3). Data exclude indirect CO2.   Intensities (per unit of GDP and per capita) as well as index are calculated on gross direct emissions excluding emissions or removals from land-use, land-use change and forestry (LULUCF).   The GDP used to calculate intensities is expressed in USD at 2010 prices and PPPs.

18.1. Source data

The indicator shows the greenhouse gas emissions of key source categories. A key source category is defined as an emission source category that has a significant influence on a country´s greenhouse gas inventory in terms of the absolute level of emissions, the trend in emissions, or both. The different greenhouse gases are weighted by their global warming potential, and the results are expressed in CO2 equivalents. The European Union (EU) as a party to the United Nations Framework Convention on Climate Change (UNFCCC) reports annually its greenhouse gas inventory for the year t-2 and within the area covered by its Member States. The inventory also constitutes the EU-15 submission under the Kyoto Protocol. The EU greenhouse gas inventory is the most relevant and accurate source of information on greenhouse gas emissions in the EU, and serves to monitor all anthropogenic emissions by sources and removals by sinks of greenhouse gases not controlled by the Montreal Protocol. The inventory contains data on carbon dioxide (CO2), methane (CH4), nitrous oxide (N2O), perfluorocarbons (PFCs), hydrofluorocarbons (HFCs) and sulphur hexafluoride (SF6). The EU inventory is fully consistent with national greenhouse gas inventories compiled by the EU Member States.   The indicator is a Sustainable Development Indicator (SDI). It has been chosen for the assessment of the progress towards the objectives and targets of the EU Sustainable Development Strategy.   tsdcc210´s table: Eurobase > Tables by themes > Environment and energy > Environment > Greenhouse Gases/Air Pollution > Greenhouse gas emissions by sector (tsdcc210) tsdcc210´s table within the SDI set: Eurobase > Tables on EU policy > Sustainable Development indicators > Climate change and energy > Climate change > Greenhouse gas emissions by sector (tsdcc210)

Data cited at: CAIT, retrieved from Climate Watch Climate Watch Historical Emission data contains sector-level greenhouse gas (GHG) emissions data for 194 countries and the European Union (EU) for the period 1990-2019, including emissions of the six major GHGs from most major sources and sinks. Non-CO2 emissions are expressed in CO2 equivalents using 100-year global warming potential values from IPCC Fourth Assessment Report.

This dataset includes data on greenhouse gas emissions inventory, as reported to the European Environment Agency (EEA). Note that Eurostat is not the producer of these data, only re-publishes them. The European Union (EU) as a party to the United Nations Framework Convention on Climate Change (UNFCCC) reports annually its greenhouse gas inventory for the year t-2 and within the area covered by its Member States. The inventory contains data on carbon dioxide (CO2), methane (CH4), nitrous oxide (N2O), perfluorocarbons (PFCs), hydrofluorocarbons (HFCs), sulphur hexafluoride (SF6) and nitrogen trifluoride (NF3). The EU inventory is fully consistent with national greenhouse gas inventories compiled by the EU Member States. Values flagged with 'd' have the notation key 'IE' (included elsewhere) in the original dataset published by the EEA. Notation key combinations that include NE (not estimated), as well as values reported with the additional notation key used by EEA ' – ', are reported as missing values in the air_env_gge dataset. All notation keys combinations that include a C (confidential) are flagged as confidential. The notation keys NA and NO are not associated with a flag. EEA notation keys: NO – not occurring. NE – not estimated. NA – not applicable. IE – included elsewhere. C – confidential.

This indicator shows trends in the emissions from transport (road, rail, inland navigation and domestic aviation) of the greenhouse gases regulated by the Kyoto Protocol. Only three gases are relevant in the context of transport (carbon dioxide, methane, and nitrous oxide) and these have been aggregated according to their relative global warming potentials. The EU greenhouse gas inventory is the most relevant and accurate source of information on greenhouse gas emissions in the EU, and serves to monitor all anthropogenic emissions by sources and removals by sinks of greenhouse gases not controlled by the Montreal Protocol. The EU inventory is fully consistent with national greenhouse gas inventories compiled by the EU Member States.   The indicator is published by Eurostat as a part of indicator framework (SDI) and belongs to European Environment Agency (EEA). It has been chosen for the assessment of the EU progress towards the targets of the Sustainable Development Strategy.   tsdtr410´s table within the SDI set: Eurobase > Tables on EU policy > Sustainable Development Indicators > Sustainable transport > Transport impacts > Greenhouse gas emissions from transport (tsdtr410)

The indicator calculation is based on the emissions covered under the Effort Sharing Decision (406/2009/EC). The Effort Sharing Decision sets national annual binding targets for emissions not covered under the EU emission trading scheme (ETS). The ESD emissions are calculated by deducting ETS verified emissions, CO2 emissions from domestic aviation and NF3 emissions from national total emissions. Total emissions are national totals reported under the UNFCCC (excluding LULUCF, international aviation and international maritime transport). For the period 2005-2012, additional emission estimates are deducted in order to reflect the current scope of the EU ETS, following the European Environment Agency methodology for calculating consistent time series.

20.1. Source data

The indicator is calculated as the ratio between energy-related GHG emissions and gross inland consumption of energy. It expresses how many tonnes CO2 equivalents of energy-related GHGs are being emitted in a certain economy per unit of energy that is being consumed. The data on energy emissions are being sourced from the GHG emissions reported to the UNFCCC.

The indicator measures total national emissions of the so called ‘Kyoto basket’ of greenhouse gases, including carbon dioxide (CO2), methane (CH4), nitrous oxide (N2O), and the so-called F-gases (hydrofluorocarbons, perfluorocarbons, nitrogen triflouride (NF3) and sulphur hexafluoride (SF6)). Using each gas’ individual global warming potential (GWP), they are being integrated into a single indicator expressed in units of CO2 equivalents. Emissions data are submitted annually by the EU Member States as part of the reporting under the United Nations Framework Convention on Climate Change (UNFCCC). The average population of the reference year (calculated as the arithmetic mean of the population on 1st January of two consecutive years) is used as denominator (per capita). The indicator does not include emissions and removals related to land use, land-use change and forestry (LULUCF); it does not include emissions reported as a memorandum item according to UNFCCC Guidelines but does include emissions from international aviation as well as indirect CO2 emissions.

This indicator shows trends in total man-made emissions (of both the ESD and ETS sectors) of the ‘Kyoto basket’ of greenhouse gases. It presents annual total emissions in relation to 1990 emissions The ‘Kyoto basket’ of greenhouse gases includes: carbon dioxide (CO2), methane (CH4), nitrous oxide (N2O), and the so-called F-gases (hydrofluorocarbons, perfluorocarbons, nitrogen triflouride (NF3) and sulphur hexafluoride (SF6)). These gases are aggregated into a single unit using gas-specific global warming potential (GWP) factors. The aggregated greenhouse gas emissions are expressed in units of CO2 equivalents. The indicator does not include emissions and removals related to land use, land-use change and forestry (LULUCF); nor does it include emissions from international maritime transport. It does however include emissions from international aviation. CO2 emissions from biomass with energy recovery are reported as a Memorandum item according to UNFCCC Guidelines and not included in national greenhouse gas totals. The EU as a whole is committed to achieving at least a 20% reduction of its greenhouse gas emissions by 2020 compared to 1990. This objective implies: - a 21 % reduction in emissions from sectors covered by the EU ETS (emission trading scheme) compared to 2005 by 2020; - a reduction of 10 % in emissions for sectors outside the EU ETS covered by the ESD (effort sharing decision). To achieve this 10% overall target each Member State has agreed country-specific greenhouse gas emission limits for 2020 compared to 2005 (Council Decision 2009/406/EC). Data Source: European Environment Agency

Note: Nominal prices on April, 01 2021 Prices are not necessarily comparable between carbon pricing initiatives because of differences in the number of sectors covered and allocation methods applied, specific exemptions, and different compensation methods. Due to the dynamic approach to continuously improve data quality and fluctuating exchange rates, data of different years may not always be comparable and could be amended following new information from official government sources. In addition, data for a limited number of initiatives may be incomplete as they are in the process of being validated and will be updated following confirmation from official government sources.