Organisation for Economic Co-operation and Development

The gross nutrient balances (N and P) are calculated as the difference between the total quantity of nutrient inputs entering an agricultural system (mainly fertilisers, livestock manure), and the quantity of nutrient outputs leaving the system (mainly uptake of nutrients by crops and grassland). Gross nutrient balances are expressed in tonnes of nutrient surplus (when positive) or deficit (when negative). This calculation can be used as a proxy to reveal the status of environmental pressures, such as declining soil fertility in the case of a nutrient deficit, or for a nutrient surplus the risk of polluting soil, water and air. The nutrient balance indicator is also expressed in terms of kilogrammes of nutrient surplus per hectare of agricultural land to facilitate the comparison of the relative intensity of nutrients in agricultural systems between countries.

The average effective age of retirement is calculated as a weighted average of (net) withdrawals from the labour market at different ages over a 5-year period for workers initially aged 40 and over. In order to abstract from compositional effects in the age structure of the population, labour force withdrawals are estimated based on changes in labour force participation rates rather than labour force levels. These changes are calculated for each (synthetic) cohort divided into 5-year age groups. The estimates shown in red are less reliable as they have been derived from interpolations of census data rather than from annual labour force surveys. The estimates for women in Turkey are based on 3-yearly moving averages of participation rates for each 5-year age group. OECD estimates based on the results of national labour force surveys, the European Union Labour Force Survey and, for earlier years in some countries, national censuses.

The business tendency survey indicators cover a standard set of indicators for four economic sectors: manufacturing, construction, retail trade and other services. This includes an indicator of overall business conditions or business confidence in each sector. The consumer opinion survey indicators cover a restricted set of indicators on consumer confidence, expected economic situation and price expectations.   Business and consumer opinion (tendency) surveys provide qualitative information that has proved useful for monitoring the current economic situation. Typically they are based on a sample of enterprises or households and respondents are asked about their assessments of the current situation and expectations for the immediate future. For enterprise surveys this concerns topics such as production, orders, stocks etc. and in the case of consumer surveys their intentions concerning major purposes, economic situation now compared with the recent past and expectations for the immediate future. Many survey series provide advance warning of turning points in aggregate economic activity as measured by GDP or industrial production. Such series are known as leading indicators in cyclical analysis. These types of survey series are widely used as component series in composite leading indicators.   The main characteristic of these types of surveys is that instead of asking for exact figures, they usually ask for the direction of change e.g. a question on tendency by reference to a “normal” state, e.g. of production level. Possible answers are generally of the three point scale type e.g. up/same/down or above normal/normal/below normal for enterprise surveys and of the five point scale type e.g. increase sharply/increase slightly/remain the same/fall slightly/fall sharply for consumer surveys. In presenting the results as a time series, only the balance is shown. That is “same” or “normal” answers are ignored and the balance is obtained by taking the difference between percentages of respondents giving favourable and unfavourable answers.   Virtually all business tendency and consumer opinion survey data are presented as time series of balances in this dataset, either in raw or seasonally adjusted form. Very few series are presented as indices, and where these exist they have generally been converted from underlying balances by countries before submitting the data to the OECD.

This dataset contains three earnings-dispersion measures - ratio of 9th-to-1st, 9th-to-5th and 5th-to-1st - where 9th, fifth 5th (median) and 1st deciles are upper-earnings decile limits, unless otherwise indicated, of gross earnings of full-time dependent employees.

The OECD Economic Outlook analyzes the major economic trends over the coming 2 years. It provides in-depth coverage of the main economic issues and the policy measures required to foster growth in each member country. Forthcoming developments in major non-OECD economies are also evaluated in detail. Each edition of the Outlook provides a unique resource to keep abreast of world economic developments. The OECD Economic Outlook database is a comprehensive and consistent macroeconomic database of the OECD economies, covering expenditures, foreign trade, output, labor markets, interest and exchange rates, balance of payments and government debt. For the non-OECD regions, foreign trade and current account series are available. Variables are defined in such a way that they are as homogenous as possible for the countries covered. Breaks in underlying series are corrected as far as possible. Sources for the historical data are publications of national statistical agencies and OECD data bases such as Quarterly National Accounts, Annual National Accounts, Labor Force Statistics and Main Economic Indicators. The cut-off date for information used in the compilation of the projections was June 1, 2023. The aggregation of world trade takes into account the projections made for the main non-OECD economies. Thus, besides OECD and the OECD euro area, the following regions are available: Dynamic Asian Economies (Chinese Taipei, Hong Kong, Malaysia, the Philippines, Singapore, Thailand, Vietnam); Oil Producers (Algeria, Angola, Azerbaijan Bahrain, Brunei, Chad, Rep. of Congo, Ecuador, Equatorial Guinea, Gabon, Iran, Iraq, Kazakhstan, Kuwait, Libya, Nigeria, Oman, Qatar, Saudi Arabia, Sudan, Timor-Leste , Trinidad and Tobago, Turkmenistan, United Arab Emirates, Yemen, Venezuela); with the remaining countries in a residual 'Rest of the World' group.

 This indicator measures the proportion of earnings that are lost to either higher taxes or lower benefit entitlements when a jobless person takes up employment. It is commonly referred to as "Participation Tax Rate (PTR)" as it measures financial disincentives to participate in the labour market.

Related data is available here: https://knoema.com/PTRCCSA/ptrs-for-parents-claiming-guaranteed-minimum-income-gmi-benefits-and-using-childcare-services This indicator measures the proportion of earnings that are lost to either higher taxes, lower benefits or childcare costs when a parent with young children takes up full-time employment and requires use of centre-based childcare services.

Data source(s) used The inland fisheries data collection is part of the more comprehensive data gathering carried out on an annual basis by the Fisheries Committee (COFI) of the Trade and Agriculture Directorate (TAD) from OECD members and participating non-OECD economies. Data on marine landings, aquaculture production, inland fisheries catch, fleet, employment, total allowable catch (TAC) and fisheries support estimate (FSE) are collected from Fisheries Ministries, National Statistics Offices and other institutions designated as an official data source. The surveys used for this exercise are the OECD Fisheries questionnaires.   Data are collected in tonnes and national currency at current values. For analytical purposes and data comparisons, value data are converted and published also in US dollars. Exchange rates are average yearly spot rates, taken from the dataset OECD Economic Outlook: Statistics and Projections. Data reported in this dataset are expressed in tonnes, in units of national currency and in US dollars. Data are recorded on a landed weight basis, i.e. the mass (or weight) of a product at the time of landing, regardless of the state in which is landed (i.e. whole, gutted, filleted, meal, etc.). For exceptions, please see the individual notes. Statistical population The statistical population is the set of countries participating in the work of the COFI, i.e. OECD members, excluding landlocked countries, with some exceptions (Czech Republic and Slovakia are included, Israel is not). The group includes also the following partner countries: Argentina, China, Colombia, Costa Rica, Indonesia, Lithuania, Peru, Philippines, Thailand and Chinese Taipei. In order to facilitate analysis and comparisons over time, historical data for OECD members have been provided over as long a period as possible, often even before a country became a member of the Organisation. Information on the membership dates of all OECD countries can be found at OECD Ratification Dates. Key statistical concept Inland fisheries include catches of fish, crustaceans, molluscs and other aquatic invertebrates (and animals), residues and seaweeds in lakes, rivers, ponds, inland canals and other land-locked water bodies. For the purpose of this questionnaire the boundary between inland and marine areas at the river mouth is left to the discretion of the national authority. Production from aquaculture installations should not be reported on this form. However, catches from fisheries that are managed by stocking should be included. The methodological reference document for fisheries and aquaculture statistics is the CWP Handbook of Fishery Statistics.

Unit of measure used: Thousands   OECD countries seldom have tools specifically designed to measure the inflows and outflows of the foreign population, and national estimates are generally based either on population registers or residence permit data. This note is aimed at describing more systematically what is measured by each of the sources used.   Flows derived from population registers   Population registers can usually produce inflow and outflow data for both nationals and foreigners. To register, foreigners may have to indicate possession of an appropriate residence and/or work permit valid for at least as long as the minimum registration period. Emigrants are usually identified by a stated intention to leave the country, although the period of (intended) absence is not always specified.   When population registers are used, departures tend to be less well recorded than arrivals. Indeed, the emigrant who plans to return to the host country in the future may be reluctant to inform about his departure to avoid losing rights related to the presence on the register. Registration criteria vary considerably across countries (as the minimum duration of stay for individuals to be defined as immigrants ranges from three months to one year), which poses major problems of international comparison. For example, in some countries, register data cover a portion of temporary migrants, in some cases including asylum seekers when they live in private households (as opposed to reception centres or hostels for immigrants) and international students.   Flows derived from residence and/or work permits   Statistics on permits are generally based on the number of permits issued during a given period and depend on the types of permits used. The so-called “settlement countries” (Australia, Canada, New Zealand and the United States) consider as immigrants persons who have been granted the right of permanent residence. Statistics on temporary immigrants are also published in this database for these countries since the legal duration of their residence is often similar to long-term migration (over a year). In the case of France, the permits covered are those valid for at least one year (excluding students). Data for Italy and Portugal include temporary migrants.   Another characteristic of permit data is that flows of nationals are not recorded. Some flows of foreigners may also not be recorded, either because the type of permit they hold is not tabulated in the statistics or because they are not required to have a permit (freedom of movement agreements). In addition, permit data do not necessarily reflect physical flows or actual lengths of stay since: i) permits may be issued overseas but individuals may decide not to use them, or delay their arrival; ii) permits may be issued to persons who have in fact been resident in the country for some time, the permit indicating a change of status, or a renewal of the same permit.   Permit data may be influenced by the processing capacity of government agencies. In some instances a large backlog of applications may build up and therefore the true demand for permits may only emerge once backlogs are cleared.   Flows estimated from specific surveys   Ireland provides estimates based on the results of Quarterly National Household Surveys and other sources such as permit data and asylum applications. These estimates are revised periodically on the basis of census data. Data for the United Kingdom are based on a survey of passengers entering or exiting the country by plane, train or boat (International Passenger Survey). One of the aims of this survey is to estimate the number and characteristics of migrants. The survey is based on a random sample of approximately one out of every 500 passengers. The figures were revised significantly following the latest census in each of these two countries, which seems to indicate that these estimates do not constitute an “ideal” source either. Australia and New Zealand also conduct passenger surveys which enable them to establish the length of stay on the basis of migrants’ stated intentions when they enter or exit the country.

This dataset contains data on employment by hour bands for usual weekly hours worked in the main job.  Standard hour bands are reported for most countries.  Actual hours of work instead of usual hours of work are only available in some countries (Japan and Korea).  Data are broken down by professional status - employees, total employment - by sex and standardised age groups (15-24, 25-54, 55+, total). Unit of measure used - Data are expressed in thousands of persons. For detailed information on labour force surveys for all countries please see the attached file : www.oecd.org/els/employmentpoliciesanddata/LFSNOTE

This table contains labour force data on labour market status - population, labour force, unemployment and employment - by sex and by detailed age groups and standard age groups (15-24, 25-54, 55-64, 65+, total). Note: Population figures reported in table LFS by sex are Census-based, while the data for this table are taken from labour force surveys. Population for total age group refers to working age population (15 to 64 years).

It provides a breakdown of government expenditure according to their function. To meet this end, economic flows of expenditure must be aggregated according to the Classification of the Functions of Government (COFOG).

It presents the three approaches of the GDP: expenditure based, output based and income based. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA.

Annual National Accounts

The dataset on Quarterly Sector Accounts data presents the whole set of non financial accounts for the institutional sectors.It includes the following accounts: - Production account / External account of goods and services - Generation of income account - Allocation of primary income account - Secondary distribution of income account - Use of disposable income account - Change in net worth due to saving and capital transfers accounts - Acquisitions of non-financial assets account - Balance sheets for non-financial assets - Employment by sector These accounts are designed to produce accounting balances that are of particular interest for economic analysis such as value added, operating surplus, saving or net lending/net borrowing. Quarterly Sector Accounts data have been reported to the OECD by Member countries and Key Partner countries using a standard questionnaire (simplified table T0119 or detailed table T0801). These questionnaires are designed to collect internationally comparable data according to definitions and concepts presented in the System of National Accounts (SNA 2008 or SNA 1993 for a few countries):

This dataset presents patent statistics and indicators that are suitable for tracking innovation in environment-related technologies. They allow the assessment of countries and firms' innovation performance as well as the design of governments' environmental and innovation policies.

The OECD Environment Directorate, in collaboration with the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in environment-related technologies. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' environmental and innovation policies. The patent statistics presented here are constructed using data extracted from the Worldwide Patent Statistical Database (PATSTAT) of the European Patent Office (EPO) using algorithms developed by the OECD. Consistent with other patent statistics provided in OECD.Stat, only published applications for "patents of invention" are considered (i.e. excluding utility models, petty patents, etc.). The relevant patent documents are identified using search strategies for environment-related technologies (ENV-TECH) which were developed specifically for this purpose. They allow identifying technologies relevant to environmental management, water-related adaptation and climate change mitigation. An aggregate category labelled "selected environment-related technologies" includes all of the environmental domains presented here.

The OECD Environment Directorate, in collaboration with the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in environment-related technologies. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' environmental and innovation policies. The patent statistics presented here are constructed using data extracted from the Worldwide Patent Statistical Database (PATSTAT) of the European Patent Office (EPO) using algorithms developed by the OECD. Consistent with other patent statistics provided in OECD.Stat, only published applications for "patents of invention" are considered (i.e. excluding utility models, petty patents, etc.). The relevant patent documents are identified using search strategies for environment-related technologies (ENV-TECH) which were developed specifically for this purpose. They allow identifying technologies relevant to environmental management, water-related adaptation and climate change mitigation. An aggregate category labelled "selected environment-related technologies" includes all of the environmental domains presented here.

Patents are a key measure of innovation output, as patent indicators reflect the inventive performance of countries, regions, technologies, firms, etc. They are also used to track the level of diffusion of knowledge across technology areas, countries, sectors, firms, etc., and the level of internationalisation of innovative activities. Patent indicators can serve to measure the output of R&D, its productivity, structure and the development of a specific technology/industry. The relationship between patents as an intermediate output resulting from R&D inputs has been investigated extensively. Patents are often interpreted as an output indicator; however, they could also be viewed as an input indicator, as patents are used as a source of information by subsequent inventors. Like any other indicator, patent indicators have many advantages and disadvantages. The advantages of patent indicators are :patents have a close link to invention;patents cover a broad range of technologies on which there are sometimes few other sources of data;the contents of patent documents are a rich source of information (on the applicant, inventor, technology category, claims, etc.); andpatent data are readily available from patent offices. However, patents are subject to certain drawbacks:the value distribution of patents is skewed as many patents have no industrial application (and hence are of little value to society) whereas a few are of substantial value;many inventions are not patented because they are not patentable or inventors may protect the inventions using other methods, such as secrecy, lead time, etc.;the propensity to patent differs across countries and industries;differences in patent regulations make it difficult to compare counts across countries; andchanges in patent law over the years make it difficult to analyse trends over time. 

The Public Sector Debt database includes quarterly detailed information on all liabilities which constitute debt instruments, by initial and residual maturity, which are held by the government, and more broadly the public sector. The debt instruments are those instruments that require the payment of principal and interest or both at some point(s) in the future. All liabilities are considered debt, except liabilities in the form of equity and investment fund shares and, financial derivatives and employee stock options.

This database provides a set of indicators that reflect the level and structure of central government support for business R&D; in form of R&D; tax incentives and direct funding across OECD member countries and ten non-member economies (Argentina, Brazil, Bulgaria, Croatia, Cyprus, People's Republic of China, Romania, Russian Federation, and South Africa). This includes time-series indicators of tax expenditures for R&D;, based on the latest 2017 OECD data collection on tax incentive support for R&D; expenditures that was completed in July 2017. These estimates of the cost of R&D; tax relief have been combined with data on direct R&D; funding, as compiled by National Statistical Offices based on reports from firms, in order to provide a more complete picture of government efforts to promote business R&D.; The latest indicators and information on R&D; tax incentives also feature on the dedicated OECD website Measuring R&D; tax incentives.Tax expenditures are deviations from a benchmark tax system (OECD, 2010) and countries use different national benchmarks. Available estimates typically reflect the sum of foregone tax revenues – on an accruals basis – and refunds where applicable, with no or minimal adjustments for behavior effects. Some countries only report claims realised in a given year (cash basis), while others report losses to government on an accrual basis, excluding claims referring to earlier periods and including claims for current R&D; to be used in the future. For general and country-specific notes on the estimates of government tax relief for R&D; expenditures (GTARD), see http://www.oecd.org/sti/rd-tax-stats-gtard-notes.pdfThe sources for the other indicators (direct funding of BERD, BERD and GDP) include the OECD databases on Main Science and Technology Indicators and Eurostat R&D; statistics.

Although there are clear definitions for all the terms used in this survey, countries might have different methodologies to calculate tonne-kilometre and passenger-kilometres. Methods could be based on traffic or mobility surveys, use very different sampling methods and estimating techniques which could affect the comparability of their statistics. Also, if the definition on road fatalities is very clear and well applied by most countries, this is not the case for road injuries. Indeed, not only countries might have different definitions but the important underreporting of road injuries in most countries can distort analysis based on these data. 

Demand for statistics on business demography has grown and developed considerably in recent years. Data on births and deaths of enterprises, their life expectancy and the important role they play in economic growth and productivity, as well as the information they provide for tackling social demographic issues, are increasingly requested by policy makers and analysts alike. Business demography is a core element of the OECD’s Entrepreneurship Indicators Project, where the OECD and Eurostat are collaborating to develop a framework for the regular and harmonised measurement of entrepreneurial activity and the factors that enhance or impede it. The data in this database is presented in International Standard of Industrial Classification (ISIC Revision 4).

The OECD Secretariat collects a wide range of statistics on businesses and business activity. This database features the data collection of the Statistics Directorate relating to a number of key variables, such as value added, operating surplus, employment, and the number of business units, for example, broken down by 4-digit International Standard of Industrial Classification (ISIC Revision 4) industry groups (including the service sector)), referred to as the Structural Statistics on Industry and Services (SSIS) database; and by size class; referred to as the Business Statistics by Size Class (BSC) database.

The lack of common definitions and practices to measure transport infrastructure spending hinders comparisons between countries and spending options. Data for road and rail infrastructure are the most comprehensive while data on sea port and airport spending are less detailed in coverage and definition. While our survey covers all sources of financing a number of countries exclude private spending, including Japan and India. Around 65% of countries report data on urban spending while for the remaining countries data on spending in this area are missing. Indicators such as the share of GDP needed for investment in transport infrastructure, depend on a number of factors, such as the quality and age of existing infrastructure, maturity of the transport system, geography of the country and transport-intensity of its productive sector. Caution is therefore required when comparing investment data between countries. However, data for individual countries and country groups are consistent over time and useful for identifying underlying trends and changes in levels of spending, especially for inland transport infrastructure. These issues of definitions and methods are addressed in a companion report Understanding the Value of Transport Infrastructure – Guidelines for macro-level measurement of spending and assets (ITF/OECD2013) that aims to improve the international collection of related statistics.

This dataset contains data on the share of the five durations - less than 1 month, >1 month and < 3 months, >3 months and <6 months, >6 months and <1 year, 1 year and over - of unemployment among total unemployment by sex and by standardised age groups (15-19, 15-24, 20-24, 25-54, 55+, total).