Organisation for Economic Co-operation and Development

This dataset contains the main results of the 2017 Eurostat-OECD PPP comparison for the 49 countries that participated in the 2017 round of the Eurostat-OECD Purchasing Power Parity (PPP) Programme. Colombia and Costa Rica participated for the first time. Please note that time series for PPPs for GDP, actual individual consumption and household final consumption for these two countries in the National Accounts databases are still based on the 2011 ICP results until April 2020 (release of ICP 2017 results).

This indicator measures the income of selected jobless families that claim Guaranteed Minimum Income (GMI) benefits. Values are expressed both in national currency and as a percentage of the median disposable income in the country. When the country's poverty line is defined as a fixed percentage of the median disposable income, the normalization of GMI amounts in terms of the median disposable income allows measuring the gap between benefit entitlements and the poverty line. For instance, if the poverty threshold is 50% of the median disposable income, a value of the indicator of 30% means that benefit entitlements are 20 percentage points below the poverty line.

The gross nutrient balances (N and P) are calculated as the difference between the total quantity of nutrient inputs entering an agricultural system (mainly fertilisers, livestock manure), and the quantity of nutrient outputs leaving the system (mainly uptake of nutrients by crops and grassland). Gross nutrient balances are expressed in tonnes of nutrient surplus (when positive) or deficit (when negative). This calculation can be used as a proxy to reveal the status of environmental pressures, such as declining soil fertility in the case of a nutrient deficit, or for a nutrient surplus the risk of polluting soil, water and air. The nutrient balance indicator is also expressed in terms of kilogrammes of nutrient surplus per hectare of agricultural land to facilitate the comparison of the relative intensity of nutrients in agricultural systems between countries.

The gross nutrient balances (N and P) are calculated as the difference between the total quantity of nutrient inputs entering an agricultural system (mainly fertilizers, livestock manure), and the quantity of nutrient outputs leaving the system (mainly uptake of nutrients by crops and grassland). Gross nutrient balances are expressed in tonnes of nutrient surplus (when positive) or deficit (when negative). This calculation can be used as a proxy to reveal the status of environmental pressures, such as declining soil fertility in the case of a nutrient deficit, or for a nutrient surplus the risk of polluting soil, water and air. The nutrient balance indicator is also expressed in terms of kilogrammes of nutrient surplus per hectare of agricultural land to facilitate the comparison of the relative intensity of nutrients in agricultural systems between countries.

commitment is a firm written obligation by a government or official agency, backed by the appropriation or availability of the necessary funds, to provide resources of a specified amount under specified financial terms and conditions and for specified purposes for the benefit of a recipient country or a multilateral agency. Members unable to comply with this definition should explain the definition that they use. -- Commitments are considered to be made at the date a loan or grant agreement is signed or the obligation is otherwise made known to the recipient (e.g. in the case of budgetary allocations to overseas territories, the final vote of the budget should be taken as the date of commitment). For certain special expenditures, e.g. emergency aid, the date of disbursement may be taken as the date of commitment. -- Bilateral commitments comprise new commitments and additions to earlier commitments, excluding any commitments cancelled during the same year. Cancellations and reductions in the year reported on of commitments made in earlier years are reported in the CRS, but not in the DAC questionnaire. -- In contrast to bilateral commitments, commitments of capital subscriptions, grants and loans to multilateral agencies should show the sum of amounts which are expected to be disbursed before the end of the next year and amounts disbursed in the year reported on but not previously reported as a commitment. For capital subscriptions in the form of notes payable at sight, enter the expected amount of deposits of such notes as the amount committed.

Destination of Official Development Assistance Disbursements. Geographical breakdown by donor, recipient and for some types of aid (e.g. grant, loan, technical co-operation) on a disbursement basis (i.e. actual expenditures). The data cover flows from bilateral and multilateral donors which focus on flows from DAC member countries and the EU Institutions.

This dataset describes the emissions to the atmosphere released as a result of production and consumption processes. The productive activities are broken down by economic activity and the household consumption activities are broken down by purpose (transport, heating, and other activities). Air emissions include emissions of individual greenhouse gases (GHG) as well as air pollutants such as sulphur dioxide, nitrogen oxides, and particulate matter. The emissions are also aggregated (using equivalence factors) to report on environmental pressures: global warming potential, acidifying gases and ozone precursors.

This database includes annual, quarterly and monthly information on carbon dioxide (CO2) emissions related to commercial passenger, freight, and general aviation flights, on both a territory and a residence basis, for 186 countries. These CO2 emissions are estimated by the OECD, based on a consistent methodology across countries. The main source used for the estimation of these CO2 emissions is a database compiled by the International Civil Aviation Organisation (ICAO) with all commercial passenger and freight flights around the world.

Residential Property Prices Indices (RPPIs) – also named House price indices (HPIs), are index numbers that measure the prices of residential properties over time. RPPIs are key statistics not only for citizens and households across the world, but also for economic and monetary policy makers. They can help, for example, to monitor potential macroeconomic imbalances and the risk exposure of the household and financial sectors. This dataset covers the 34 OECD member countries and some non-member countries. In addition to the nominal RPPIs it contains information on real house prices, rental prices and the ratios of nominal prices to rents and to disposable household income per capita. This dataset contains quarterly statistics for each country. House prices differ widely across OECD countries, both with respect to recent changes and to valuation levels. The OECD has identified one main nominal index for each country that covers the prices for the sale of newly-built and existing dwellings. The datasets “Analytical house price indicators” and “Residential Property Price Indices (RPPIs) – Headline Indicators” refer to the same price indices for all countries apart from Brazil, Canada, China, the United States and the Euro area. These differences are further documented in country-specific metadata. For the United States, the series used in “Analytical house price indicators” is included in the dataset called “Residential Property Price Indices (RPPIs) – Complete database”, but is not the headline indicator. For all other countries, non-seasonally adjusted price indices in both datasets are identical in the period in which they overlap. This research dataset provides extended time series coverage for many countries. The objective is to provide information on the long term trend of house prices and develop indicators which can be used to help track and analyse macroeconomic developments and risks. The extended data supplement the OECD RPPI data with historical data from a variety of sources, including other international organisations, central banks and national statistical offices. The methodological basis on the historical data and the types of geographical areas and dwellings they cover can differ from those used in the OECD RPPI data. The database contains a number of additional series. Real house prices are given by the ratio of seasonally adjusted nominal house prices to the seasonally adjusted consumers’ expenditure deflator in each country, from the OECD national accounts database. This provides information on how nominal house prices have changed over time relative to prices in the general economy. The rental prices come from the OECD Main Economic Indicators database and refer to Consumer Price Indices (CPIs) for Actual rentals for housing (COICOP 04.1). If this indicator is missing for a country, another indicator is chosen. The chosen indicator are usually those corresponding to the CPI aggregate for Housing including Actual rentals for housing (COICOP 04.1), imputed rentals for housing (COICOP 04.2) and Maintenance and repair of the dwelling (COICOP 04.3). The disposable income indicators come from the OECD national accounts database. Net household disposable income is used. The population data come from the OECD national accounts database. The price-to-rent ratio is given by the ratio of nominal house prices to rental prices. This is a measure of the profitability of owning a house. The price-to-income ratio is given by the ratio of nominal house prices to nominal household disposable income per capita. This is a measure of the affordability of purchasing a house. An indication that house prices may be overvalued is provided if either of these ratios is above their long-term averages. The standardised price-rent and price-income ratios show the current price-rent and price-income ratios relative to their respective long-term averages. The long-term average, which is used as a reference value, is calculated over the whole period available when the indicator begins after 1980 or 1980 if the indicator is available over a longer time period. The standardised ratio is indexed to a reference value equal to 100 over the full sample period. Values over 100 indicate that the present price-rent ratio, or price-income ratio, is above its long-run norms. This provides an indication of possible housing market pressures.

Annual Purchasing Power Parities and exchange rates: This table shows annual Purchasing Power Parities (PPPs) for Gross Domestic Product (GDP), household final consumption expenditure and actual individual consumption. It also shows exchange rates (annual averages and end of period), sourced from the International Monetary Fund's database on International Financial Statistics.

The concept used is the total number of hours worked over the year divided by the average number of people in employment. The data are intended for comparisons of trends over time; they are unsuitable for comparisons of the level of average annual hours of work for a given year, because of differences in their sources. Part-time workers are covered as well as full-time workers. The series on annual hours actually worked per person in total employment presented in this table for all 34 OECD countries are consistent with the series retained for the calculation of productivity measures in the OECD Productivity database (www.oecd.org/statistics/productivity/compendium). However, there may be some differences for some countries given that the main purpose of the latter database is to report data series on labour input (i.e. total hours worked) and also because the updating of databases occur at different moments of the year. Hours Hours actually worked per person in employment are according to National Accounts concepts for 18 countries: Austria, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Italy, Korea, the Netherlands, Norway, the Slovak Republic, Spain, Sweden, Switzerland and Turkey. OECD estimates for Belgium, Ireland, Luxembourg and Portugal for annual hours worked are based on the European Labour Force Survey, as are estimates for dependent employment only for Austria, Estonia, Greece, the Slovak Republic and Slovenia. The table includes labour-force-survey-based estimates for the Russian Federation.countries: For further details and country specfic notes see: www.oecd.org/employment/outlook and www.oecd.org/employment/emp/ANNUAL-HOURS-WORKED.pdf

The average effective age of retirement is calculated as a weighted average of (net) withdrawals from the labour market at different ages over a 5-year period for workers initially aged 40 and over. In order to abstract from compositional effects in the age structure of the population, labour force withdrawals are estimated based on changes in labour force participation rates rather than labour force levels. These changes are calculated for each (synthetic) cohort divided into 5-year age groups. The estimates shown in red are less reliable as they have been derived from interpolations of census data rather than from annual labour force surveys. The estimates for women in Turkey are based on 3-yearly moving averages of participation rates for each 5-year age group. OECD estimates based on the results of national labour force surveys, the European Union Labour Force Survey and, for earlier years in some countries, national censuses.

Since the collection of 2009 data, the scope of the OECD Global Insurance Statistics questionnaire has been expanded. These changes led to the collection of key balance sheet and income statement items for direct insurance and reinsurance sectors, such as: gross claims paid, outstanding claims provision (changes), gross operating expenses, commissions, total assets, gross technical provisions (of which: unit-linked), shareholder equity, net income.

This dataset present the Balanced Trade in Services (BaTIS) dataset published by OECD. It is a complete, consistent and balanced matrix of international trade in services statistics (ITSS). It contains annual bilateral data covering 202 reporters and partners, broken down by the 12 main EBOPS2010 (BPM6) categories.

The Benefits and Wages series addresses the complicated interactions of tax and benefit systems for different family types and labour market situations. The series is a valuable tool used to compare the different benefits made available to those without work and those with different levels of in-work income for OECD countries and EU countries. The main social policy areas are as follows: taxes and social security contributions due on earnings and benefits, unemployment benefits, social assistance, family benefits, housing benefits, and in-work benefits. OECD Work Incentive and Income adequacy indicators, country specific files, the tax-benefit models and the tax benefit calculator, including detailed descriptions of all cash benefits available to those in and out of work as well as the taxes they were liable to pay are available on Benefits and Wages: OECD Indicators   Unit of measure used: Estonia: 2011 - EUR; 2010; 2009; 2008; 2007; 2006; 2005 -EEK Slovak Republic: 2010; 2009 - EUR; 2008; 2007; 2006; 2005 -SKK

This dataset presents a set of bibliometric indicators calculated using Elsevier's Scopus Custom Data, Version 5.2019; and Scimago Journal Rankings are used to calculate the top 10% most cited scientific publications.Elsevier assigns each journal in Scopus to one or more subjects using its All Science and Journal Classification (ASJC). There are 27 main fields comprising 334 subjects in the classification.This dataset is a small sample of the bibliometric indicators calculated using the Scopus Database. Different indicators will be presented in the Scoreboard platform (forthcoming).The following indicators are presented:FPUBS_NBFRAC: Total number of scientific publications, fractional counts. Publications are attributed to countries on the basis of the authors' institutional affiliations. Publications were fractionalised by contributing units; so that reported figures add up to the total number of publications (each document has the same weight). Fractional counts can be aggregated.TOP10FPUBS_NBFRAC: Total number of 10% top-cited scientific publications, fractional counts. The top 10% most cited documents is an indicator of excellence. This rate indicates the amount (in percentages) of a unit's scientific output that is included into the group of the 10% of the most cited papers in their respective scientific fields. It is a measure of high quality of research output of a unit, in this case the country. The indicator of scientific excellence is calculated at the document level using fractional counts. Documents organized by document type, ASJC field and year - are sorted in descending order based on the number of citations received. A threshold of 10% most cited documents is calculated for each category. Only documents with a fixed number of citations above the threshold are included. Documents with the same number of citations as the threshold are sorted according to the Scimago Journal Rankings (SJR) value of the journal in which they were published; those with the highest scores are selected. The citation window is based on the whole period, so top 10% most cited documents for the reference year uses whole period citations. No citation window is imposed as citation-based indicators are calculated on the basis of comparisons with documents published in the same year. The world average is 10% for the period.TOP10_X: The top 10% most cited documents is an indicator of excellence. This rate indicates the amount (in percentages) of a unit's scientific output that is included into the group of the 10% of the most cited papers in their respective scientific fields. The world average is 10% for the period.INTL_X: Percentage of scientific publications involving international collaboration. International collaboration refers to publications co-authored among institutions in different countries. Estimates are computed for each country by counting documents for which the set of listed affiliations includes at least one address within the country and one outside. Single-authored documents with multiple affiliations in different countries count as international collaboration.ISCORR_X: Percentage of corresponding/leading author scientific publications. Percentage corresponding or leading author documents, i.e. the share of scientific output where a domestic author is listed as a corresponding author. The scientific leadership indicator helps interpret the role of a given country in collaboration activities. The scientific leadership indicator shows the share of scientific output (in this case, documents by authors from a given country) where an author from this country is listed as leading author.NORMCIT_X: Normalised citation score, ratio of actual versus expected publications, percentage. Because of the differences in citation patterns of the fields and document types, field-based normalisation is required. The measure of normalised citation impact shows the relationship of the unit's average citation to the world's average, the unit is the country. The indicator is derived as the ratio between the average number of citations received by the documents published by authors affiliated to an institution in a given country and the world average of citations, over the same time period, by document type and subject area. Its value indicates how many times above (or below) the document has been cited above (or below) world average. For example, a value of 80 means the country is cited 20% below world average in that field and 130 means the country is cited 30% above average for that domain. The normalisation of citation values is item-oriented, i.e. carried out at the level of the individual document. If an article has been published in a journal allocated to more than one subject area, a mean value of the areas is calculated. The world average is 100.SPEC_I: The Relative Specialisation Index measures relative specialisation. This index is calculated by dividing all papers in a field from country a by the total production in all fields for country a, this proportion is then divided by the same proportion calculated at the world level. The world average is 1. A threshold has been set and the index has only been calculated for countries with 50 or more documents.

STAN Bilateral Trade Database by Industry and End-use category (BTDIxE) provides values of imports and exports (as well as re-imports and re-exports) of goods broken down by industrial sectors and by end-use categories. BTDIxE was designed to extend the old BTD database which provided bilateral trade in goods by industry only.  BTDIxE allows, for example, insights into the patterns of trade in intermediate goods between countries to track global production networks and supply chains, and it helps to address policy issues such as trade in value added and trade in tasks.  The database presents estimates of bilateral flows of goods from 1990 to the latest available year, i.e. 2018; the latest year shown is subject to the availability of underlying product-based annual trade statistics.  Reporters are the OECD member countries and a large number of non-OECD economies, including the BRIICS: Brazil, the Russian Federation, India, Indonesia, People's Republic of China and South Africa; other selected G20 and Asian economies; and major African and Latin American nations.  It should be noted that starting from mid-2012, the OECD and the United Nations agreed to centralise the data collection and processing procedures within UNSD Comtrade.  The list of partners covers the OECD countries, more than a hundred of non-member economies as well as the partners "World", "Rest of the World" and "Unspecified". The partner "Total foreign trade" corresponds to the flows with partner "World" excluding intra-country flows. Trade flows are divided into economic activities based on the Revision 4 of ISIC and nine end-use categories including capital goods, intermediate goods and household consumption.

The business tendency survey indicators cover a standard set of indicators for four economic sectors: manufacturing, construction, retail trade and other services. This includes an indicator of overall business conditions or business confidence in each sector. The consumer opinion survey indicators cover a restricted set of indicators on consumer confidence, expected economic situation and price expectations.   Business and consumer opinion (tendency) surveys provide qualitative information that has proved useful for monitoring the current economic situation. Typically they are based on a sample of enterprises or households and respondents are asked about their assessments of the current situation and expectations for the immediate future. For enterprise surveys this concerns topics such as production, orders, stocks etc. and in the case of consumer surveys their intentions concerning major purposes, economic situation now compared with the recent past and expectations for the immediate future. Many survey series provide advance warning of turning points in aggregate economic activity as measured by GDP or industrial production. Such series are known as leading indicators in cyclical analysis. These types of survey series are widely used as component series in composite leading indicators.   The main characteristic of these types of surveys is that instead of asking for exact figures, they usually ask for the direction of change e.g. a question on tendency by reference to a “normal” state, e.g. of production level. Possible answers are generally of the three point scale type e.g. up/same/down or above normal/normal/below normal for enterprise surveys and of the five point scale type e.g. increase sharply/increase slightly/remain the same/fall slightly/fall sharply for consumer surveys. In presenting the results as a time series, only the balance is shown. That is “same” or “normal” answers are ignored and the balance is obtained by taking the difference between percentages of respondents giving favourable and unfavourable answers.   Virtually all business tendency and consumer opinion survey data are presented as time series of balances in this dataset, either in raw or seasonally adjusted form. Very few series are presented as indices, and where these exist they have generally been converted from underlying balances by countries before submitting the data to the OECD.

Institutional coverage As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Business written in the reporting country on a gross and net premium basis. It contains a breakdown between domestic companies, foreign-controlled companies and branches and agencies or foreign companies.

OECD Indicators on Carbon dioxide (CO2) emissions embodied in international trade (TeCO2) are derived by combining the 2021 editions of OECD Inter-Country Input-Output (ICIO) Database and of International Energy Agency (IEA) statistics on CO2 emissions from fuel combustion. In this release of TeCO2, emissions from fuels used for international aviation and maritime transport (i.e. aviation and marine bunkers) are also considered.Production-based CO2 emissions are estimated by allocating the CO2 emissions to the 45 target industries in OECD ICIO and, to household final consumption of fuels, by both residents and non-residents.Demand-based CO2 emissions are calculated by multiplying the intensities of the production-based emissions (c) with the global Leontief inverse (I-A)(-1) and global final demand matrix (Y) from OECD ICIO, taking the column sums of the resulting matrix and adding residential and private road emissions (FNLC), i.e. direct emissions from final demand: colsum [ diag(c) (I-A)(-1) Y ] + FNLC.For more information, see TeCO2 web page: http://oe.cd/io-co2.

This indicator reports the amount of carbon emissions from fossil fuel combustion embodied in imports and exports in mega tonnes of CO2 (MtCO2) for 63 countries and 34 industries between 1995 and 2011.

The indicator reports the hypothetical amount of carbon emissions from fossil fuel combustion embodied in imports if imported goods were produced with a carbon intensity (i.e. emissions factors) equal to that of the importing country at a given time – the Equal Carbon Intensity (ECI) assumption. It covers 65 countries and 34 industries between 1995 and 2011.

Institutional coverage As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Commissions in the reporting country, containing a breakdown between domestic companies, foreign-controlled companies and branches and agencies of foreign companies.

This dataset presents the Consolidated financial balance sheets by economic sector (Quarterly table 0710), according to SNA 2008 methodology. It comprises all flows, which record, by type of financial instruments, the financial transactions between institutional sectors.

This dataset presents the Consolidated financial transactions by economic sector (Quarterly table 0610), according to SNA 2008 methodology. It comprises all flows, which record, by type of financial instruments, the financial transactions between institutional sectors.

Note: CPA data for 2018 and 2019 are projections from the 2016 Survey on Forward Spending Plans. Country Programmable Aid (CPA), outlined in our Development Brief  and also known as “core” aid, is the portion of aid donors programme for individual countries, and over which partner countries could have a significant say. CPA is much closer than ODA to capturing the flows of aid that goes to the partner country, and has been proven in several studies to be a good proxy of aid recorded at country level. CPA was developed in 2007 in close collaboration with DAC members. It is derived on the basis of DAC statistics and was retroactively calculated from 2000 onwards

The objective of the CRS Aid Activity database is to provide a set of readily available basic data that enables analysis on where aid goes, what purposes it serves and what policies it aims to implement, on a comparable basis for all DAC members. Data are collected on individual projects and programmes. Focus is on financial data but some descriptive information is also made available.

This dataset contains three earnings-dispersion measures - ratio of 9th-to-1st, 9th-to-5th and 5th-to-1st - where ninth, fifth (or median) and first deciles are upper-earnings decile limits, unless otherwise indicated, of gross earnings of full-time dependent employees. The dataset also includes series on: the incidence of low-paid workers defined as the share of full-time workers earning less than two-thirds of gross median earnings of all full-time workers; the incidence of high of high-paid workers defined as the share of full-time workers earning more than one-and-half time gross median earnings of all full-time workers; gender wage gap unadjusted and defined as the difference between median wages of men and women relative to the median wages of men.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business datawhere composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Click to collapse Item coverage Outstanding investment by direct insurance companies, classified by investment category, by the companies' nationality and by its destination (domestic or foreign). As of 2009, investment data exclude assets linked to unit-linked products sold to policyholders.

This table contains data on discouraged workers who are persons not in the labour force who believe that there is no work available due to various reasons and who desire to work. Data are broken down by sex and standardised age groups (15-24, 15-64, 25-54, 55-64, 65+, total).

Distribution of net official development assistance (ODA) is defined as geographical aid allocations. Net ODA may be distributed by income group (least developed countries, other low-income countries, lower middle-income countries, upper middle-income countries, unallocated and more advanced developing countries and territories) or by geography (sub-Saharan Africa, South and Central Asia, other Asia and Oceania, Middle East and North Africa, Latin America and the Caribbean, Europe, and unspecified). The OECD Development Assistance Committee's "List of ODA Recipients" shows developing countries and territories eligible for ODA. The list is revised every three years. It is designed for statistical purposes, not as guidance for aid distribution or for other preferential treatment. In particular, geographical aid allocations are national policy decisions and responsibilities. This indicator is measured in million USD constant prices, using 2018 as the base year.

Tourism can be regarded as a social, cultural and economic phenomenon related to the movement of people outside their usual place of residence.

There has been a growing interest in monitoring patterns of trade in services around the world, which is partly associated with ongoing trade negotiations and partly due to the increasing importance of services in OECD economies. It has been developed to supplement other OECD publications on trade in services to address the data needs of trade analysts. It is also an important part of OECD's programme to facilitate the implementation of the recommendations of the revised Manual on Statistics of International Trade in Services 2010.Other commentsThe Task Force on Statistics of International Trade in Services maintains a matrix summarising the status of the trade in services data collection performed by International Organisations. The table displays links to the databases as well as update timetables, availability of metadata, availability of bilateral data, and other important characteristics.

Latest Version is available here: https://knoema.com/OECDEO2020DEC/economic-outlook-no-108-december-2020   Economic Outlook No 107 (EO107) 2/2   Given the unusual level of uncertainty caused by the Covid-19 pandemic, this Economic Outlook (EO107) presents two scenarios for each country and economy – one scenario in which a second outbreak occurs in most economies towards the end of this year (double-hit scenario) and an alternative scenario where the second outbreak is avoided (single-hit scenario).Furthermore, only a limited number of series is made available compared to past editions.   This data set presents the double-hit scenario.   The OECD Economic Outlook analyses the major economic trends over the coming 2 years. It provides in-depth coverage of the main economic issues and the policy measures required to foster growth in each member country. Forthcoming developments in selected non-OECD economies are also evaluated in detail. Each edition of the Outlook provides a unique resource to keep abreast of world economic developments. The OECD Economic Outlook database is a comprehensive and consistent macroeconomic database of the OECD economies, covering expenditures, foreign trade, output, labour markets, interest and exchange rates, balance of payments, and government debt. For the non-OECD regions, foreign trade and current account series are available.   The database contains annual data (for all variables) and quarterly figures (for a subset of variables). Variables are defined in such a way that they are as homogenous as possible for the countries covered. Breaks in underlying series are corrected as far as possible. Sources for the historical data are publications of national statistical agencies and OECD data bases such as Quarterly National Accounts, Annual National Accounts, Labour Force Statistics and Main Economic Indicators. The cut-off date for information used in the compilation of the projections was the 4 June 2020.   Concerning the aggregation of world trade, a new composition has been introduced, since projections are now made for the major non-OECD economies. Thus, besides OECD and the OECD euro area, the following new regions are available: Dynamic Asian Economies (Chinese Taipei, Hong Kong, Malaysia, the Philippines, Singapore, Thailand, Vietnam); Oil Producers (Azerbaijan, Kazakhstan, Turkmenistan, Brunei, Timor-Leste, Bahrain, Iran, Iraq, Kuwait, Libya, Oman, Qatar, Saudi Arabia, United Arab Emirates, Yemen, Ecuador, Trinidad and Tobago, Venezuela, Algeria, Angola, Chad, Rep. of Congo, Equatorial Guinea, Gabon, Nigeria, Sudan); with the remaining countries in a residual 'Rest of the World' group.

Latest version is available here: https://knoema.com/OECDEO2020DEC/economic-outlook-no-108-december-2020   Economic Outlook No 107 (EO107) 1/2   Given the unusual level of uncertainty caused by the Covid-19 pandemic, this Economic Outlook (EO107) presents two scenarios for each country and economy – one scenario in which a second outbreak occurs in most economies towards the end of this year (double-hit scenario) and an alternative scenario where the second outbreak is avoided (single-hit scenario).Furthermore, only a limited number of series is made available compared to past editions.   This data set presents the single-hit scenario.   The OECD Economic Outlook analyses the major economic trends over the coming 2 years. It provides in-depth coverage of the main economic issues and the policy measures required to foster growth in each member country. Forthcoming developments in selected non-OECD economies are also evaluated in detail. Each edition of the Outlook provides a unique resource to keep abreast of world economic developments. The OECD Economic Outlook database is a comprehensive and consistent macroeconomic database of the OECD economies, covering expenditures, foreign trade, output, labour markets, interest and exchange rates, balance of payments, and government debt. For the non-OECD regions, foreign trade and current account series are available.   The database contains annual data (for all variables) and quarterly figures (for a subset of variables). Variables are defined in such a way that they are as homogenous as possible for the countries covered. Breaks in underlying series are corrected as far as possible. Sources for the historical data are publications of national statistical agencies and OECD data bases such as Quarterly National Accounts, Annual National Accounts, Labour Force Statistics and Main Economic Indicators. The cut-off date for information used in the compilation of the projections was the 4 June 2020.   Concerning the aggregation of world trade, a new composition has been introduced, since projections are now made for the major non-OECD economies. Thus, besides OECD and the OECD euro area, the following new regions are available: Dynamic Asian Economies (Chinese Taipei, Hong Kong, Malaysia, the Philippines, Singapore, Thailand, Vietnam); Oil Producers (Azerbaijan, Kazakhstan, Turkmenistan, Brunei, Timor-Leste, Bahrain, Iran, Iraq, Kuwait, Libya, Oman, Qatar, Saudi Arabia, United Arab Emirates, Yemen, Ecuador, Trinidad and Tobago, Venezuela, Algeria, Angola, Chad, Rep. of Congo, Equatorial Guinea, Gabon, Nigeria, Sudan); with the remaining countries in a residual 'Rest of the World' group.

The OECD Economic Outlook analyses the major economic trends over the coming 2 years. It provides in-depth coverage of the main economic issues and the policy measures required to foster growth in each member country. Forthcoming developments in major non-OECD economies are also evaluated in detail. Each edition of the Outlook provides a unique resource to keep abreast of world economic developments. The OECD Economic Outlook database is a comprehensive and consistent macroeconomic database of the OECD economies, covering expenditures, foreign trade, output, labour markets, interest and exchange rates, balance of payments and government debt. For the non-OECD regions, foreign trade and current account series are available. Variables are defined in such a way that they are as homogenous as possible for the countries covered. Breaks in underlying series are corrected as far as possible. Sources for the historical data are publications of national statistical agencies and OECD data bases such as Quarterly National Accounts, Annual National Accounts, Labour Force Statistics and Main Economic Indicators. The cut-off date for information used in the compilation of the projections was June 1, 2023. The aggregation of world trade takes into account the projections made for the main non-OECD economies. Thus, besides OECD and the OECD euro area, the following regions are available: Dynamic Asian Economies (Chinese Taipei, Hong Kong, Malaysia, the Philippines, Singapore, Thailand, Vietnam); Oil Producers (Algeria, Angola, Azerbaijan Bahrain, Brunei, Chad, Rep. of Congo, Ecuador, Equatorial Guinea, Gabon, Iran, Iraq, Kazakhstan, Kuwait, Libya, Nigeria, Oman, Qatar, Saudi Arabia, Sudan, Timor-Leste, Trinidad and Tobago, Turkmenistan, United Arab Emirates, Yemen, Venezuela); with the remaining countries in a residual 'Rest of the World' group.

This table contains data on economic short-time workers by professional status (employees or total employment). Economic short-time workers comprise workers who are working less than usual due to business slack, plant stoppage, or technical reasons. However, the definitions are not harmonised which hampers the comparison across countries. Data are broken down professional status - employees, total employment - by sex and by standardised age groups (15-24, 25-54, 55+, total).

The OECD, in cooperation with the EU, has developed a harmonised definition of urban areas which overcomes previous limitations linked to administrative definitions (OECD, 2012). According to this definition an urban area is a functional economic unit characterised by densely inhabited “city core” and “commuting zone” whose labour market is highly integrated with the core. The Metropolitan database provides indicators of 649 OECD metropolitan areas identified in 33 OECD countries and the functional urban areas of Colombia. Comparable values of population, GDP, employment, and other indicators are presented.

 This indicator measures the proportion of earnings that are lost to either higher taxes or lower benefit entitlements when a jobless person takes up employment. It is commonly referred to as "Participation Tax Rate (PTR)" as it measures financial disincentives to participate in the labour market.

Related data is available here: https://knoema.com/PTRCCSA/ptrs-for-parents-claiming-guaranteed-minimum-income-gmi-benefits-and-using-childcare-services This indicator measures the proportion of earnings that are lost to either higher taxes, lower benefits or childcare costs when a parent with young children takes up full-time employment and requires use of centre-based childcare services.

The Pensions at a Glance indicators, covering all 34 OECD countries, are designed to show future entitlements for workers who entered the labour market in 2008 and spend their entire working lives under the same set of rules. The results presented here include all mandatory pension schemes for private-sector workers, regardless of whether they are public or private.

This dataset provides selected information on national emissions of air pollutants: man-made emissions of sulphur oxides (SOx), nitrogen oxides (NOx), particulate matter (PM), carbon monoxide (CO) and volatile organic compounds (VOC). Categories presented are based on the NFR (nomenclature for reporting) 2014 classification. 

Compared to men, women are less likely to work full-time, more likely to be employed in lower-paid occupations, and less likely to progress in their careers. As a result gender pay gaps persist and women are more likely to end their lives in poverty. This data looks at how many men and women are in paid work, who works full-time, and how having children and growing older affect women’s work patterns and earnings differently to men’s. It looks at how women bear the brunt of domestic and family responsibilities, even when working full-time. It also considers the benefits for businesses of keeping skilled women in the workplace, and encouraging them to sit on company boards. It looks at women’s representation in parliaments, judicial systems, and the senior civil service. It examines male and female employment in the wake of the crisis, and how women tend to be confined to the most vulnerable categories within the informal sector in developing countries.

This table contains a distribution of workers by job tenure intervals. Data are broken down by professional status - employees, self-employed, total employment – sex, five-year and broad age groups (15-24, 25-54, 55-64, 15-64, total, etc.). Job tenure is measured by the length of time workers have been in their current or main job or with their current employer. This information is valuable for estimating the degree of fluidity in the labour market and in identifying the areas of economic activity where the turnover of labour is rapid or otherwise. Data are so far reported for a number of European countries and will be expanded to cover a greater number of countries. Unit of measure used - Data are expressed years. Example: 1.5 = 1 year and 6 months.

This dataset contains the tenure composition (as a percentage of all job tenures). Data are broken down by professional status - employees and total employment - sex, five-year and broad age groups (15-24, 25-54, 55-64, 15-64, total, etc.). Geographic coverageIn order to facilitate analysis and comparisons over time, historical data for OECD members have been provided over as long a period as possible, often even before a country became a member of the Organisation. Information on the membership dates of all OECD countries can be found at OECD Ratification Dates.

Job tenure is measured by the length of time workers have been in their current or main job or with their current employer. This information is valuable for estimating the degree of fluidity in the labour market and in identifying the areas of economic activity where the turnover of labour is rapid or otherwise. Data are so far reported for a number of European countries and will be expanded to cover a greater number of countries.

This table contains data on permanent and temporary workers based on the type of work contract of their main job. Data are further broken down by professional status - employees, total employment - by sex and by standardised age groups (15-19, 15-24, 20-24, 25-54, 55-64, 65+, total). Unit of measure used - Data are expressed in thousands of persons.

Enrolment rate per age is the percentage of students enrolled in each type of institution over the total of students

Number of students enrolled in different education programmes by country of origin and sex.

Entrepreneurship is crucial to economic development, promoting social integration and reducing inequalities. The Gender-entrepreneurship dataset presents an original collection of indicators that measure gender equality in entrepreneurship, providing an important reference for policy insights and policy making. Data refer mainly to the self-employed, their profile, age, education and sector of activity.

EAMFP growth measures the residual growth in the joint production of both the desirable and the undesirable outputs that cannot be explained by changes in the consumption of factor inputs (including labour, produced capital and natural capital). Therefore, for a given growth of input use, EAMFP increases when GDP increases or when pollution decreases. As part of the growth accounting framework underlying the EAMFP indicator, the growth contribution of natural capital and growth adjustment for pollution abatement indicators are derived: Growth contribution of natural capital - measures to what extent a country's growth in output is attributable to natural resource use; Growth adjustment for pollution abatement - measures to what extent a country's GDP growth should be corrected for pollution abatement efforts - adding what has been undervalued due to resources being diverted to pollution abatement, or deducing the ‘excess' growth which is generated at the expense of environmental quality.

This dataset presents the data collected from OECD and partner economies on environmentally related tax revenue accounts with a breakdown by tax-base category and industrial activity. The data collection follows the OECD methodological guidelines for compiling Environmentally Related Tax Revenue (ERTR) accounts in line with the System of Environmental-Economic Accounting - Central Framework (SEEA-CF). The OECD ERTR accounts are consistent with the existing data collection by Eurostat. Nevertheless, in an effort to enhance the policy relevance of this SEEA module, the OECD approach goes slightly further and includes several additional revenue categories: Taxes levied on greenhouse gas (GHG) emissions are explicitly reported in two sub-categories: an energy related part (recorded as an energy tax) and a non-energy related part, such as certain GHG emissions related to landfills or agriculture (recorded as a pollution tax). Four "memo items" (i.e. information items that do not change the total) are included: (i) Certain land taxes; (ii) Taxes on oil and natural gas extraction; (iii) Taxes on the resource rent; (iv) Elevated value added taxes levied on environmentally related tax-bases. The dataset covers OECD member countries, accession candidates and selected partner economies since the year 1995. For EU countries, it includes the information on ERTR accounts reported to Eurostat.

Air pollution is considered one of the most pressing environmental and health issues across OECD countries and beyond. According to the World Health Organisation (WHO), exposure to fine particulate matter (PM2.5) has potentially the most significant adverse effects on health compared to other pollutants. PM2.5 can be inhaled and cause serious health problems including both respiratory and cardiovascular disease, having its most severe effects on children and elderly people. Exposure to PM2.5 has been shown to considerably increase the risk of heart disease and stroke in particular. For these reasons, population exposure to (outdoor or ambient) PM2.5 has been identified as an OECD Green Growth headline indicator. The underlying PM2.5 concentrations estimates are taken from van Donkelaar et al. (2016). They have been derived using satellite observations and a chemical transport model, calibrated to global ground-based measurements using Geographically Weighted Regression at 0.01° resolution. The underlying population data, Gridded Population of the World, version 4 (GPWv4) are taken from the Socioeconomic Data and Applications Center (SEDAC) at the NASA. The underlying boundary geometries are taken from the Global Administrative Unit Layers (GAUL) developed by the FAO, and the OECD Territorial Classification, when available. The current version of the database presents much more variation with respect to the previous one. The reason is that the underlying concentration estimates previously included smoothed multi-year averages and interpolations; while in the current version annual concentration estimates are used. Establishing trends of pollution exposure should be done with care, especially at smaller output areas, as their inputs (e.g. underlying data and models) can change from year to year. We recommend using a 3-year moving average for visualisation.

In view of the strong demand for cross-national indicators on the situation of families and children, the OECD Family Database was developed to provide cross-national indicators on family outcomes and family policies across the OECD countries, its enhanced engagement partners and EU member states. The database brings together information from various national and international databases, both from within the OECD and from external organisations. The database classifies indicators into four main dimensions: (i) structure of families, (ii) labour market position of families, (iii) public policies for families and children and (iv) child outcomes. Detailed information on the definitions, sources and methods used in the construction of the database can be found on the OECD Family Database webpage.

FDI data are based on statistics provided by 35 OECD member countries and by Lithuania. BMD4: OECD Benchmark Definition of Foreign Direct Investment - 4th Edition

This dataset FDI positions by counterpart area, BMD4 includes inward and outward Foreign Direct Investment (FDI) positions by partner country for OECD reporting economies.  Inward and outward FDI positions by partner country are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions, in millions of national currency and as a share of total FDI positions.

This dataset FDI positions by economic activity, BMD4 includes inward and outward Foreign Direct Investment (FDI) positions by economic activity according to ISIC4 for OECD reporting economies.

The OECD FISH Unit, in collaboration with the Environment Directorate and the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in fisheries-related technologies. The search strategy for fisheries and aquaculture related technologies adopts a mixed solution with a definition of the technical field of interest in fisheries and aquaculture innovation complemented by keywords, e.g. by looking for keywords in the International Patent Classification (IPC) codes and checking manually the relevance of the results in the text of patents (in the title, the abstract, etc). Technology domains are detailed in the ANNEX attached below. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' fisheries, aquaculture and innovation policies.

The OECD FISH Unit, in collaboration with the Environment Directorate and the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in fisheries-related technologies. The search strategy for fisheries and aquaculture related technologies adopts a mixed solution with a definition of the technical field of interest in fisheries and aquaculture innovation complemented by keywords, e.g. by looking for keywords in the International Patent Classification (IPC) codes and checking manually the relevance of the results in the text of patents (in the title, the abstract, etc). Technology domains are detailed in the ANNEX attached below. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' fisheries, aquaculture and innovation policies.

The OECD FISH Unit, in collaboration with the Environment Directorate and the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in fisheries-related technologies. The search strategy for fisheries and aquaculture related technologies adopts a mixed solution with a definition of the technical field of interest in fisheries and aquaculture innovation complemented by keywords, e.g. by looking for keywords in the International Patent Classification (IPC) codes and checking manually the relevance of the results in the text of patents (in the title, the abstract, etc). Technology domains are detailed in the ANNEX attached below. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' fisheries, aquaculture and innovation policies.

The number of students enrolled refers to the count of students studying in the reference period. Each student enrolled in the education programmes covered by the corresponding category is counted once and only once. National data collection systems permitting, the statistics reflect the number of students enrolled at the beginning of the school / academic year. Preferably, the end (or near-end) of the first month of the school / academic year is chosen (special arrangements are made for part-year students who may not start studies at the beginning of the school year). Students are classified as foreign students (non-citizens) if they are not citizens of the country in which the data are collected. While pragmatic and operational, this classification is inappropriate for capturing student mobility because of differing national policies regarding the naturalisation of immigrants. Countries that have lower propensity to grant permanent residence to its immigrant populations are likely to report second generation immigrants as foreign students. Therefore, for student mobility and bilateral comparisons, interpretations of data based on the concept of foreign students should be made with caution. Students are classified as international students if they left their country of origin and moved to another country for the purpose of study. Depending on country-specific immigration legislation, mobility arrangements, and data availability, international students may be defined as students who are not permanent or usual residents of their country of study or alternatively as students who obtained their prior education in a different country, including another EU country.

Key statistical concept Although there are clear definitions for all the terms used in this survey, countries might have different methodologies to calculate tonne-kilometer and passenger-kilometers. Methods could be based on traffic or mobility surveys, use very different sampling methods and estimating techniques which could affect the comparability of their statistics. Also, if the definition on road fatalities is very clear and well applied by most countries, this is not the case for road injuries. Indeed, not only countries might have different definitions but the important underreporting of road injuries in most countries can distort analysis based on these data.

This table contains data on full-time and part-time employment based on a common definition of 30-usual weekly hours of work in the main job. Data are broken down by professional status - employees, total employment - sex and standardised age groups (15-24, 25-54, 55+, total). Unit of measure used - Data are expressed in thousands of persons.

This dataset contains incidences and gender composition of part-time employment with standardised age groups (15-24, 25-54, 55-64, 65+, total). Part-time employment is based on national definitions.  The definition of part-time work varies considerably across OECD countries Essentially three main approaches can be distinguished: i) a classification based on the worker’s perception of his/her employment situation; ii) a cut-off (generally 30 or 35 hours per week) based on usual working hours, with persons usually working fewer hours being considered part-timers; iii) a comparable cut-off based on actual hours worked during the reference week. A criterion based on actual hours will generally yield a part-time rate higher than one based on usual hours, particularly if there are temporary reductions in working time as a result of holidays, illness, short-timing, etc. On the other hand, it is not entirely clear whether a classification based on the worker’s perception will necessarily yield estimates of part-time work that are higher or lower than one based on a fixed cut-off. In one country (France) which changed from 1981 to 1982 from a definition based on an actual hours cut-off (30 hours) to one based on the respondent’s perception, the latter criterion appeared to produce slightly higher estimates.

Data include pension funds per the OECD classification by type of pension plans and by type of pension funds. All types of plans are included (occupational and personal, mandatory and voluntary). The OECD classification considers both funded and book reserved pension plans that are workplace-based (occupational pension plans) or accessed directly in retail markets (personal pension plans). Both mandatory and voluntary arrangements are included. The data include plans where benefits are paid by a private sector entity (classified as private pension plans by the OECD) as well as those paid by a funded public sector entity. A full description of the OECD classification can be found at:http://www.oecd.org/dataoecd/0/49/38356329.pdf. Pension funds include also some personal pension arrangements like the Individual Retirement Accounts (IRAs) in the United States as well as funds for government workers. The coverage of the statistics follows the regulatory and supervisory framework. All authorised pension funds are therefore normally covered by the Global Pension Statistics exercise. Assets pertaining to reserve funds in social security systems are excluded.

Data include pension funds per the OECD classification by type of pension plans and by type of pension funds. All types of plans are included (occupational and personal, mandatory and voluntary). The OECD classification considers both funded and book reserved pension plans that are workplace-based (occupational pension plans) or accessed directly in retail markets (personal pension plans). Both mandatory and voluntary arrangements are included. The data include plans where benefits are paid by a private sector entity (classified as private pension plans by the OECD) as well as those paid by a funded public sector entity. A full description of the OECD classification can be found at: http://www.oecd.org/dataoecd/0/49/38356329.pdf.  Pension funds include also some personal pension arrangements like the Individual Retirement Accounts (IRAs) in the United States as well as funds for government workers. The coverage of the statistics follows the regulatory and supervisory framework. All authorised pension funds are therefore normally covered by the Global Pension Statistics exercise. Assets pertaining to reserve funds in social security systems are excluded.

The GID-DB is a database providing researchers and policymakers with key data on gender-based discrimination in social institutions. This data helps analyse women’s empowerment and understand gender gaps in other key areas of development.Covering 180 countries and territories, the GID-DB contains comprehensive information on legal, cultural and traditional practices that discriminate against women and girls.

This part contains general information on number of insurance companies and employees within the sector.

This table provides information on the main relevant indicators. The data have mainly been supplied by the World Bank, and cover, where available: -Current Gross National Income (GNI) in US $ millions; -GNI per capita (US $); -Population; -Energy use as kilogram of oil per capita; -Average Life Expectancy of Adults; and -Adult Literacy Rate as a percentage of the country population. Data for Sudan include South Sudan, with the exception of total population, which is reported separately.

This data set combines the different regional publications of Revenue Statistics:Revenue Statistics 2019OECD/ATAF/AUC (2019), Revenue Statistics in Africa 2019OECD et al (2020), Revenue Statistics in Latin America and the Caribbean 2020 (LAC)Revenue Statistics in Asian and Pacific Economies 2019 Revenue Statistics The annual statistical publications present a unique set of detailed and internationally comparable tax revenue data in a common format. Its approach is based on the well-established methodology of the OECD Revenue Statistics (OECD, 2019), which has become an essential reference. It provides a conceptual framework defining which government receipts should be regarded as taxes and classifies different types of taxes. Comparable tables show revenue data by type of tax in national currency, as a percentage of GDP, and, for the different types of taxes, as a share of total taxation. Comparisons are also made with the averages of the 36 OECD economies, of the 24 LAC countries (two of which are OECD members countries° and of 26 African countries.   The data set does not replace the other publications, and users are advised to consult the regional data sets for country specific information.

The OECD Green Growth database contains selected indicators for monitoring progress towards green growth to support policy making and inform the public at large. The database synthesises data and indicators across a wide range of domains including a range of OECD databases as well as external data sources. The database covers OECD member and accession countries, key partners (including Brazil, China, India, Indonesia and South Africa) and other selected non-OECD countries.

This dataset presents trends in man-made emissions of major greenhouse gases and emissions by gas.   Data refer to total emissions of CO2 (emissions from energy use and industrial processes, e.g. cement production), CH4 (methane emissions from solid waste, livestock, mining of hard coal and lignite, rice paddies, agriculture and leaks from natural gas pipelines), nitrous oxide (N2O), hydrofluorocarbons (HFCs), perfluorocarbons (PFCs), sulphur hexafluoride (SF6) and nitrogen trifluoride (NF3). Data exclude indirect CO2.   Intensities (per unit of GDP and per capita) as well as index are calculated on gross direct emissions excluding emissions or removals from land-use, land-use change and forestry (LULUCF).   The GDP used to calculate intensities is expressed in USD at 2010 prices and PPPs.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Gross claims payments in the reporting country, containing a breakdown between domestic companies, foreign-controlled companies and branches and agencies of foreign companies.

Gross fixed capital formation in the health care system is measured by the total value of the fixed assets that health providers have acquired during the accounting period (less the value of the disposals of assets) and that are used repeatedly or continuously for more than one year in the production of health services. While human resources are essential to the health and long-term care sector, physical resources are also a key factor in the production of health services. How much a country invests in new health facilities, diagnostic and therapeutic equipment, and information and communications technology (ICT) can have an important impact on the capacity of a health system to meet the healthcare needs of the population. Having sufficient equipment in intensive care units and other health settings helps to avoid potentially catastrophic delays in diagnosing and treating patients. Non-medical equipment is also important, notably the IT infrastructure needed to better monitor population health, both in acute situations and in the long term. Investing in capital equipment is therefore a prerequisite to strengthening overall health system resilience.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. This part contains gross operating expenses in the reporting country, with a breakdown between domestic companies, foreign-controlled companies and branches and agencies of foreign companies.

The Gross Replacement Rate (GRR) of unemployment benefits measure the amount of unemployment benefit received after 1, 2, …, T months of unemployment in proportion to the employment income earned before losing the job. All values are calculated before taxes and social security contribution payments. Calculations exclude family benefits, social assitance, housing benefits as well as in-work benefits. Because of these exclusions, the Net Replacement Rates in unemployment may provide a more complete measure of income maintenance than the GRR, especially when considering longer periods of unemployment and/or families with children.

Productivity is a key driver of economic growth and changes in living standards. Labour productivity growth implies a higher level of output for unit of labour input (hours worked or persons employed). This can be achieved if more capital is used in production or through improved overall efficiency with which labour and capital are used together, i.e., higher multifactor productivity growth (MFP). Productivity is also a key driver of international competitiveness, e.g. as measured by Unit Labour Costs (ULC).   The OECD Productivity Database aims at providing users with the most comprehensive and the latest productivity estimates. The update cycle is on a rolling basis, i.e. each variable in the dataset is made publicly available as soon as it is updated in the sources databases. However, some time lag may arise which affects individual series and/or countries for two reasons: first, hours worked data from the OECD Employment Outlook are typically updated less frequently than the OECD Annual National Accounts Database; second, source data for capital services are typically available in annual national accounts later than source data for labour productivity and ULCs.   Note to users: The OECD Productivity Database accounts for the methodological changes in national accounts' statistics, such as the implementation of the System of National Accounts 2008 (2008 SNA) and the implementation of the international industrial classification ISIC Rev.4. These changes had an impact on output, labour and capital measurement. For Chile, China, Colombia, India, Japan, Turkey and the Russian Federation the indicators are in line with the System of National Accounts 1993 (1993 SNA); for all other countries, the indicators presented are based on the 2008 SNA

Cancer follow up has been given for the range of 5 years. The highest range has been considered as for this period, for example 1995-2000 is considered as 2000.

OECD Health Data 2016 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.

OECD Health Data 2017 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.B1:B4

OECD Health Data 2017 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.

A System of Health Accounts 2011 provides an updated and systematic description of the financial flows related to the consumption of health care goods and services. As demands for information increase and more countries implement and institutionalise health accounts according to the system, the data produced are expected to be more comparable, more detailed and more policy relevant. It builds on the original OECD Manual, published in 2000 to create a single global framework for producing health expenditure accounts that can help track resource flows from sources to uses. It is the result of a collaborative effort between the OECD, WHO and the European Commission, and sets out in more detail the boundaries, the definitions and the concepts – responding to health care systems around the globe – from the simplest to the more complicated. The accounting framework is organised around a tri-axial system for the recording of health care expenditure, namely classifications of the functions of health care (ICHA-HC), health care provision (ICHA-HP), and financing schemes (ICHA-HF).

OECD Health Data 2016 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.

This dataset presents annual population data from 1950 to 2050 by sex and five year age groups as well as age-dependency ratios. The data is available for 46 countries. Data from 1950 to 2011 (2012) are historical data while data from 2012 (2013) are projections. In order to estimate the population in coming years, fertility rate, life expectancy and level of immigration have to be estimated. Assumptions underlying the estimations of each of these three elements are usually categorise as low, medium or high within one specific country. Where a range of projections are available, the projection data presented here are based on the "medium variant". Assumptions underlying the projection data shown are described country per country in the metadata table as well as the source of data. There are three sources for the data: national statistical institutes, Eurostat or the United Nations. The population data is presented in 18 five year age groups which refer to the population from 0-4 to 85 and more. The following age groups are also available: less than 15, less than 20, 15 to 64, 20-64, 65 and over. Age-dependency ratios are also presented. Assumptions by country. Data are presented for 46 countries. The 34 OECD member countries, the 6 EU countries not belonging to the OECD, and Brazil, Colombia, India, Indonesia, China, Russia and South Africa.

This indicator shows the working hours needed to escape poverty for a jobless family claiming Guaranteed Minimum Income benefits.

How’s Life? Well-being is the one-stop shop for the 80+ indicators of the OECD Well-being Dashboard, providing information on current well-being outcomes, well-being inequalities and the resources and risks that underpin future well-being. The 11 dimensions of current well-being relate to material conditions that shape people’s economic options (Income and Wealth, Housing, Work and Job Quality) and quality-of-life factors that encompass how well people are (and how well they feel they are), what they know and can do, and how healthy and safe their places of living are (Health, Knowledge and Skills, Environmental Quality, Subjective Well-being, Safety). Quality of life also encompasses how connected and engaged people are, and how and with whom they spend their time (Work-Life Balance, Social Connections, Civic Engagement). The distribution of current well-being is taken into account by looking at three types of inequality: gaps between population groups (horizontal inequalities); gaps between those at the top and those at the bottom of the achievement scale in each dimension (vertical inequalities); and deprivations (i.e. the share of the population falling below a given threshold of achievement). The systemic resources that underpin future well-being over time are expressed in terms of four types of capital: Economic, Natural, Human and Social.

This dataset presents number of importing/exporting enterprises and their trade value (in millions of USD) by size class, and economic activity expressed in ISIC Rev.4.

The ICT Access and Usage by Businesses database provides a selection of 59 indicators, based on the 2nd revision of the OECD Model Survey on ICT Access and Usage by Businesses.

The ICT Access and Usage by Households and Individuals database provides a selection of 92 indicators, based on the of 2nd revision of the OECD Model Survey on ICT Access and Usage by Households and Individuals.The selected indicators originate from two sources:1. An OECD data collection on the following OECD and accession countries or key partners: Australia, Brazil, Canada, Costa Rica, Chile, Colombia, Israel, Japan, Korea, Mexico, New Zealand, Switzerland, and the United States. Data collection methodology followed by these countries is available in each respective country metadata file.2. Eurostat Statistics on Households and Individuals for the OECD countries that are part of the European Statistical system. For those countries, indicators shown in this database refer to the original indicator as published by EUROSTAT -see the correspondence table-. Please refer to Eurostat methodology to access the methodological information.For all countries, breakdowns used correspond to those of EUROSTAT, unless otherwise stated in the metadata.

ICT goods are those that are either intended to fulfil the function of information processing and communication by electronic means, including transmission and display, OR which use electronic processing to detect, measure and/or record physical phenomena, or to control a physical process. ICT goods are defined by the OECD in terms of the Harmonised System. The guiding principle for the delineation of ICT goods is that such goods must either be intended to fulfil the function of information processing and communication by electronic means, including transmission and display, OR use electronic processing to detect, measure and/or record physical phenomena, or to control a physical process.Another guiding principle was to use existing classification systems in order to take advantage of existing data sets and therefore ensure the immediate use of the proposed standard. In this case, the underlying system is the Harmonized System (HS). The HS is the only commodity classification system used on a sufficiently wide basis to support international data comparison. A large number of countries use it to classify export and import of goods, and many countries use it (or a classification derived from or linked to it) to categorise domestic outputs.The application of the ICT product definition to selection of in-scope HS categories is a somewhat subjective exercise. The fact that the HS is not built on the basis of the functionality of products makes it much more difficult. The distinction between products which fulfil those functions and products that simply embody electronics but fundamentally fulfil other functions is not always obvious.It is possible to adopt a narrow or broad interpretation of the guideline, though the OECD chose a broader interpretation, an approach which is consistent with that adopted to develop the ICT sector definition.

NOTE FOR THIS DATA CUBEFor all indicators provided in this cube, value are expressed as percentage of Internet users.For each country (except for Costa Rica -see below-), the value of the indicators provided in this cube are based on data from the ICT Access and Usage by Households and Individuals database, and metadata and sources are strictly identical.Internet users generally relate to a recall period of 3 months or 12 months as indicated below. For exceptions, see the country metadata in the ICT Access and Usage by Households and Individuals database.For Australia, 12 months before 2014, 3 months from 2014 onwards.For Canada, Colombia and Japan, 12 months.For Israel, Costa Rica and the United States, 3 months.For New Zealand, 12 months in 2006.For Chile, Korea, Mexico, New Zeland (2006 excepted), Switzerland and Brazil: 1. For indicators starting with D1, I3 and I9, Internet users relate to a recall period of 3 months; 2. For indicators starting with F1, Internet users relate to a recall period of 3 months untill 2007 and of 12 months from 2008 onwards; 3. For the remaining indicators, Internet users relate to a recall period of 12 months.For Costa Rica, data are OECD estimates based on data provided by the National Institute of Statistics and Censuses and by the Ministry of Science, Technology and Telecommunications (MICITT), and for all the indicators, Internet users relate to a recall period of 3 months.For the remaining countries (all from Eurostat): 1. For indicators starting with D1, Internet users relate to a recall period of 3 months; 2. For indicators starting with F1, Internet users relate to a recall period of 3 months untill 2007 and of 12 months from 2008 onwards; 3. For the remaining indicators, Internet users relate to a recall period of 12 months.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older with a tertiary education.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible. The exact national source and reference period for each file is given in Table A.1 (see the methodological document).

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

This database presents the 2018 edition of OECD time-series indicators of implied R&D tax subsidy rates for OECD member countries and five non-member economies (Brazil, People's Republic of China, Romania, Russian Federation, and South Africa) over the period 2000-2018, drawing on data collected in the OECD-NESTI R&D tax incentive surveys from 2007 to 2018. The 2018 edition of RDTAXSUB contains time-series estimates that are based on headline tax credit and allowance rates, by firm size and profitability scenario. Due to limited historical data availability, the estimates are not adjusted for provisions that bound the tax benefits received by firms (e.g. ceilings, thresholds). They therefore provide an upper bound for the marginal tax subsidy implied by R&D tax relief measures across countries over time. These estimates should not be confused with separate contemporary cross-sectional OECD estimates of marginal tax subsidy rates (OECD, 2018) that compute adjusted (weighted) tax credit/allowance rates for a number of countries based on available information on the proportion of eligible R&D subject to different marginal levels of relief (see 2017).The tax subsidy rate is defined as 1 minus the B-index, a measure of the before-tax income needed by a “representative” firm to break even on USD 1 of R&D outlays (Warda, 2001). As tax component of the user cost of R&D, the B-Index is is directly linked to measures of effective marginal tax rates. Measures of tax subsidy rates such as those based on the B-index provide a convenient proxy for examining the implications of tax relief provisions. These provide a synthetic representation of the generosity of a tax system from the perspective of a generic or model type of firm for the marginal unit of R&D expenditure. To provide a more accurate representation of different scenarios, B-indices are calculated for “representative” firms according to whether they can claim tax benefits against their tax liability in the reporting period (OECD, 2013). When credits or allowances are fully refundable, the B-index of a firm in such a position is identical to the profit scenario. Carry-forwards are modelled as discounted options to claim incentives in the future, assuming a constant annual probability of returning to profit of 50% and a nominal discount rate of 10%. For general and country-specific notes on the time-series estimates of implied marginal tax subsidy rates on R&D expenditures (based on the B-index), see http://www.oecd.org/sti/rd-tax-stats-bindex-notes.pdf.

The allocation of bilateral intermediate imports across using industries assumes that import coefficients are the same for all trade partners, i.e. SHAREipkt is identical across exporter countries. Hence, the bilateral pattern of imported intermediates from industry p is the same across all using industries k. However, it is different from the bilateral pattern of total imports from industry p because trade data (measured by VALUEijpt) allows distinguishing bilateral imports of intermediates from final good imports in industry p. While the BEC classification enables the identification of intermediate goods, no similar classification is available for trade in services, due to the high level of aggregation in services trade data. While goods trade data are based on customs declarations allowing the identification of goods at a highly disaggregated level, services trade data are based on a variety of information such as business accounts, administrative sources, surveys, and estimation techniques (Manual on Statistics of International Trade in Services, 2002). Hence, in the case of trade in services, VALUEijpt is the total value of imports of service p, i.e. both final and intermediate (and not only services that are used in the production of other goods and services, as in the case of goods data). By making an additional assumption and adjusting SHAREipkt, it is however possible to calculate trade in intermediate services. In the case of services imports, SHAREipkt is the share of imported service inputs p used by industry k in total imports of p of country i. In the case of services, besides the assumption that all trading partners have the same distribution of intermediate imports p across using industries k, it is furthermore required that the share of intermediate services in overall bilateral services imports of country i is the same across all partner countries j. Finally, it should be mentioned that trade data reported in the trade statistics do not fully match imports as reported in I-O tables. One main reason is that while trade data is recorded at consumer prices, I-O tables are evaluated at producer prices. There are also other differences such as the treatment of re-exports, scrap metal, waste products and second hand goods or unallocated trade data.

Tourism can be regarded as a social, cultural and economic phenomenon related to the movement of people outside their usual place of residence.

Note: Update to this data are available only to OECD subscribers. Please visit: https://stats.oecd.org/Index.aspx?DataSetCode=DW_I This table contains data on discouraged jobseekers as a percentage of the labour force and as a percentage of the population by sex and standardised age groups (15-24, 15-64, 25-54, 55-64, 65+, total). Unit of measure used - Data are expressed as percentages.

This table contains the shares of economic short-time workers among total employment, the ratio of economic short-time workers and labour force, and the gender composition of economic short-time workers. Data re broken down by professional status - employees, total employment – by sex and standardised age groups (15-24, 25-54, 55+, total). Unit of measure used - Data are expressed as percentages.

Incidence of employment by usual weekly hours worked: This table contains data on the cross-country distribution of employment by hour bands for declared hour bands, broken down by professional status - employees, total employment - sex and detailed age groups. In order to facilitate analysis and comparisons over time, historical data for OECD members have been provided over as long a period as possible, often even before a country became a member of the Organisation. Information on the membership dates of all OECD countries can be found at OECD Ratification Dates

This table contains incidences and gender composition of part-time employment with standardised (15-24, 25-54, 55-64, 65+, total) and detailed age groups. Data are further broken down by professional status - employees, total employment. Part-time employment is based on a common 30-usual-hour cut-off in the main job. Unit of measure used - Data are expressed in percentages.

This table contains incidences and gender composition of part-time employment with standardised (15-24, 25-54, 55-64, 65+, total) and detailed age groups. Data are further broken down by professional status - employees, total employment. Part-time employment is based on national definitions. The definition of part-time work varies considerably across OECD countries Essentially three main approaches can be distinguished: i) a classification based on the worker's perception of his/her employment situation; ii) a cut-off (generally 30 or 35 hours per week) based on usual working hours, with persons usually working fewer hours being considered part-timers; iii) a comparable cut-off based on actual hours worked during the reference week. A criterion based on actual hours will generally yield a part-time rate higher than one based on usual hours, particularly if there are temporary reductions in working time as a result of holidays, illness, short-timing, etc. On the other hand, it is not entirely clear whether a classification based on the worker's perception will necessarily yield estimates of part-time work that are higher or lower than one based on a fixed cut-off. In one country (France) which changed from 1981 to 1982 from a definition based on an actual hours cut-off (30 hours) to one based on the respondent's perception, the latter criterion appeared to produce slightly higher estimates. Other data characteristics

This datasetcontains the shares of involuntary part-time work among part-time workers and ratio of involuntary part-time work and labour force and the gender composition of involuntary part-time workers. Data are broken down by professional status - employees, total employment - sex and standardised age groups (15-24, 25-54, 55+, total).

This table contains incidences and gender composition of temporary employment with standardized age groups (15-24, 25-54, 55-64, 65+, total). Data are further broken down by professional status - employees, total employment. Unit of measure used - Data are expressed in percentages.

This table contains data on the share of the five durations - less than 1 month,>1 month and < 3 months,>3 months and <6 months,>6 months and <1 year, 1 year and over - of unemployment among total unemployment by sex and by standardised age groups (15-19, 15-24, 20-24, 25-54, 55+, total). Unit of measure used - Data expressed in percentages.

http://www.oecd.org/els/soc/IDD-Metadata.pdf

Data source(s) used The inland fisheries data collection is part of the more comprehensive data gathering carried out on an annual basis by the Fisheries Committee (COFI) of the Trade and Agriculture Directorate (TAD) from OECD members and participating non-OECD economies. Data on marine landings, aquaculture production, inland fisheries catch, fleet, employment, total allowable catch (TAC) and fisheries support estimate (FSE) are collected from Fisheries Ministries, National Statistics Offices and other institutions designated as an official data source. The surveys used for this exercise are the OECD Fisheries questionnaires.   Data are collected in tonnes and national currency at current values. For analytical purposes and data comparisons, value data are converted and published also in US dollars. Exchange rates are average yearly spot rates, taken from the dataset OECD Economic Outlook: Statistics and Projections. Data reported in this dataset are expressed in tonnes, in units of national currency and in US dollars. Data are recorded on a landed weight basis, i.e. the mass (or weight) of a product at the time of landing, regardless of the state in which is landed (i.e. whole, gutted, filleted, meal, etc.). For exceptions, please see the individual notes. Statistical population The statistical population is the set of countries participating in the work of the COFI, i.e. OECD members, excluding landlocked countries, with some exceptions (Czech Republic and Slovakia are included, Israel is not). The group includes also the following partner countries: Argentina, China, Colombia, Costa Rica, Indonesia, Lithuania, Peru, Philippines, Thailand and Chinese Taipei. In order to facilitate analysis and comparisons over time, historical data for OECD members have been provided over as long a period as possible, often even before a country became a member of the Organisation. Information on the membership dates of all OECD countries can be found at OECD Ratification Dates. Key statistical concept Inland fisheries include catches of fish, crustaceans, molluscs and other aquatic invertebrates (and animals), residues and seaweeds in lakes, rivers, ponds, inland canals and other land-locked water bodies. For the purpose of this questionnaire the boundary between inland and marine areas at the river mouth is left to the discretion of the national authority. Production from aquaculture installations should not be reported on this form. However, catches from fisheries that are managed by stocking should be included. The methodological reference document for fisheries and aquaculture statistics is the CWP Handbook of Fishery Statistics.

These data are part of a larger database, hosted on a different website, which includes both quantitative and qualitative data, as well as graphs.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Breakdown of net premiums written in the reporting country in terms of domestic risks and foreign risks, thus providing an indicator of direct cross-border operations of insurance business.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Covers business written abroad by branches, agencies and subsidiaries established abroad of domestic undertakings and includes all business written outside the country by these entities (in both OECD and non-OECD countries).

This data deals with premiums written by classes of non-life insurance for the business written in the reporting country.

This dataset presents patent statistics and indicators that are suitable for tracking innovation in environment-related technologies. They allow the assessment of countries and firms' innovation performance as well as the design of governments' environmental and innovation policies.

Patents are a key measure of innovation output, as patent indicators reflect the inventive performance of countries, regions, technologies, firms, etc. They are also used to track the level of diffusion of knowledge across technology areas, countries, sectors, firms, etc., and the level of internationalisation of innovative activities. Patent indicators can serve to measure the output of R&D, its productivity, structure and the development of a specific technology/industry. Among the few available indicators of technology output, patent indicators are probably the most frequently used. The relationship between patents as an intermediate output resulting from R&D inputs has been investigated extensively. Patents are often interpreted as an output indicator; however, they could also be viewed as an input indicator, as patents are used as a source of information by subsequent inventors. Like any other indicator, patent indicators have many advantages and disadvantages. The advantages of patent indicators are : patents have a close link to invention; patents cover a broad range of technologies on which there are sometimes few other sources of data; the contents of patent documents are a rich source of information (on the applicant, inventor, technology category, claims, etc.); and patent data are readily available from patent offices. However, patents are subject to certain drawbacks: the value distribution of patents is skewed as many patents have no industrial application (and hence are of little value to society) whereas a few are of substantial value; many inventions are not patented because they are not patentable or inventors may protect the inventions using other methods, such as secrecy, lead time, etc.; the propensity to patent differs across countries and industries; differences in patent regulations make it difficult to compare counts across countries; and changes in patent law over the years make it difficult to analyse trends over time.

This dataset contains the number of people who graduated from an education programme by country of origin and sex.

Unit of measure used: Thousands   OECD countries seldom have tools specifically designed to measure the inflows and outflows of the foreign population, and national estimates are generally based either on population registers or residence permit data. This note is aimed at describing more systematically what is measured by each of the sources used.   Flows derived from population registers   Population registers can usually produce inflow and outflow data for both nationals and foreigners. To register, foreigners may have to indicate possession of an appropriate residence and/or work permit valid for at least as long as the minimum registration period. Emigrants are usually identified by a stated intention to leave the country, although the period of (intended) absence is not always specified.   When population registers are used, departures tend to be less well recorded than arrivals. Indeed, the emigrant who plans to return to the host country in the future may be reluctant to inform about his departure to avoid losing rights related to the presence on the register. Registration criteria vary considerably across countries (as the minimum duration of stay for individuals to be defined as immigrants ranges from three months to one year), which poses major problems of international comparison. For example, in some countries, register data cover a portion of temporary migrants, in some cases including asylum seekers when they live in private households (as opposed to reception centres or hostels for immigrants) and international students.   Flows derived from residence and/or work permits   Statistics on permits are generally based on the number of permits issued during a given period and depend on the types of permits used. The so-called “settlement countries” (Australia, Canada, New Zealand and the United States) consider as immigrants persons who have been granted the right of permanent residence. Statistics on temporary immigrants are also published in this database for these countries since the legal duration of their residence is often similar to long-term migration (over a year). In the case of France, the permits covered are those valid for at least one year (excluding students). Data for Italy and Portugal include temporary migrants.   Another characteristic of permit data is that flows of nationals are not recorded. Some flows of foreigners may also not be recorded, either because the type of permit they hold is not tabulated in the statistics or because they are not required to have a permit (freedom of movement agreements). In addition, permit data do not necessarily reflect physical flows or actual lengths of stay since: i) permits may be issued overseas but individuals may decide not to use them, or delay their arrival; ii) permits may be issued to persons who have in fact been resident in the country for some time, the permit indicating a change of status, or a renewal of the same permit.   Permit data may be influenced by the processing capacity of government agencies. In some instances a large backlog of applications may build up and therefore the true demand for permits may only emerge once backlogs are cleared.   Flows estimated from specific surveys   Ireland provides estimates based on the results of Quarterly National Household Surveys and other sources such as permit data and asylum applications. These estimates are revised periodically on the basis of census data. Data for the United Kingdom are based on a survey of passengers entering or exiting the country by plane, train or boat (International Passenger Survey). One of the aims of this survey is to estimate the number and characteristics of migrants. The survey is based on a random sample of approximately one out of every 500 passengers. The figures were revised significantly following the latest census in each of these two countries, which seems to indicate that these estimates do not constitute an “ideal” source either. Australia and New Zealand also conduct passenger surveys which enable them to establish the length of stay on the basis of migrants’ stated intentions when they enter or exit the country.

This indicator reports the percentage of students of each country of origin over the total of international students.

The International Transport Forum collects, on a quarterly basis, monthly data from all its Member countries. When monthly information is not available then quarterly data is provided. The survey contains a dozen variables selected for their quarterly availability among reporting countries. Data are collected from Transport Ministries, statistical offices and other institution designated as official data source. The survey used for this exercise is the ITF "Quarterly Transport Statistics". Variables collected are rail, road and inland waterways goods transport (T-km), rail passengers (P-km), road traffic (V-km), first registration of brand new vehicles, petrol deliveries to the road transport sector and road fatalities. Although there are clear definitions for all the terms used in this survey, countries might have different methodologies to gather or estimate quarterly data. The information provided in short-term surveys does not necessarily have the same coverage as annual data exercises and therefore remains provisional. Depending on countries, data is not always revised so totals might not correspond to the sum of the elements. The main purpose of this data collection is to identify in advance changes in transport data trends. In case of missing data for a country, ITF can calculate estimates based generally on growth rates from previous years or from data available from other sources. These estimates are used solely to calculate aggregated trends in graphic representations and are not shown at the individual country level.  

This table contains data on involuntary part-time workers by professional status. Data are broken down by professional status - employees, total employment - by sex and standardised age groups (15-24, 25-54, 55+, total). Involuntary part-time workers are part-timers (working less than 30-usual hours per week) because they could not find a full-time job. However, the definitions are not harmonised which hampers the comparison across countries. Unit of measure used - Data are expressed in thousands of persons

This table contains figures on affiliates under foreign control by investing country in the total manufacturing, total services and total business enterprise sectors.

The units used to present data in AFA are millions of national currency for monetary variables and units for the other variables. Monetary variables are in current prices. Euro-area countries: national currency data is expressed in euro beginning with the year of entry into the Economic and Monetary Union (EMU). For years prior to the year of entry into EMU, data have been converted from the former national currency using the appropriate irrevocable conversion rate. This presentation facilitates comparisons within a country over time and ensures that the historical evolution is preserved. Please note, however, that pre-EMU euro are a notional unit and should not be used to form area aggregates or to carry out cross-country comparisons.

The IPP.Stat is the statistics portal of the Innovation Policy Platform containing the main available indicators relevant to a country’s innovation performance. In addition to the traditional indicators used to monitor innovation, the range of the coverage to be found in the IPP.Stat calls for the inclusion of indicators from other domains that describe the broader national and international context in which innovation occurs. Indicators are sourced primarily from the OECD and the World Bank, as well as from other sources of comparable quality. The statistics portal is still under development.

Benefit Generosity, Income Adequacy, Work Incentives.

This dataset contains data on employment by hour bands for usual weekly hours worked in the main job.  Standard hour bands are reported for most countries.  Actual hours of work instead of usual hours of work are only available in some countries (Japan and Korea).  Data are broken down by professional status - employees, total employment - by sex and standardised age groups (15-24, 25-54, 55+, total). Unit of measure used - Data are expressed in thousands of persons. For detailed information on labour force surveys for all countries please see the attached file : www.oecd.org/els/employmentpoliciesanddata/LFSNOTE

Land resources are one of the four components of the natural environment: water, air, land and living resources. In this context land is both: a physical "milieu" necessary for the development of natural vegetation as well as cultivated vegetation;a resource for human activities.  The data presented here give information concerning land use state and changes (e.g. agricultural land, forest land).  Land area excludes area under inland water bodies (i.e. major rivers and lakes).   Arable refers to all land generally under rotation, whether for temporary crops (double-cropped areas are counted only once) or meadows, or left fallow (less than five years). These data are not meant to indicate the amount of land that is potentially cultivable.  Permanent crops are those that occupy land for a long period and do not have to be planted for several years after each harvest (e.g. cocoa, coffee, rubber). Land under vines and trees and shrubs producing fruits, nuts and flowers, such as roses and jasmine, is so classified, as are nurseries (except those for forest trees, which should be classified under "forests and other wooded land").  Arable and permanent crop land is defined as the sum of arable area and land under permanent crops.  Permanent meadows and pastures refer to land used for five years or more to grow herbaceous forage crops, either cultivated or growing wild (wild prairie or grazing land).  Forest refers to land spanning more than 0.5 hectare (0.005 km2) and a canopy cover of more than 10 percent, or trees able to reach these thresholds in situ. This includes land from which forests have been cleared but that will be reforested in the foreseeable future. This excludes woodland or forest predominantly under agricultural or urban land use and used only for recreation purposes.

The productivity and income estimates presented in this dataset are mainly based on GDP, population and employment data from the OECD Annual National Accounts. Hours worked are sourced from the OECD Annual National Accounts, the OECD Employment Outlook and national sources. The OECD Productivity Database aims at providing users with the most comprehensive and the latest productivity estimates. The update cycle is on a rolling basis, i.e. each variable in the dataset is made publicly available as soon as it is updated in the sources databases. However, timely data issues may arise and affect individual series and/or individual countries. In particular, annual hours worked estimates from the OECD Employment Outlook are typically updated less frequently (once a year, in the summer) than series of hours worked from the OECD Annual National Accounts.

This table contains labour force data on labour market status - population, labour force, unemployment and employment - by sex and by detailed age groups and standard age groups (15-24, 25-54, 55-64, 65+, total). Note: Population figures reported in table LFS by sex are Census-based, while the data for this table are taken from labour force surveys. Population for total age group refers to working age population (15 to 64 years).

This table contains data on labour force participation rates, employment/population ratios and unemployment rates for both the total labour force and civilian labour force by sex. There are data for both the total age group and the working age population (ages 15 to 64). This table also contains data on the share of civilian employment by sex.

This dataset contains the age composition (as a percentage of all ages) of the population for each labour force status - labour force, employment, unemployment - by sex.

The OECD Long-Term Baseline Scenario is a projection of some major economic variables beyond the short-term horizon of the OECD Economic Outlook. It covers all OECD economies, non-OECD G20 economies and key partners. The projection horizon is currently 2060. For the historical period and the short-run projection horizon, the series are consistent with those of the OECD Economic Outlook number in the dataset title. The definitions, sources and methods are also the same, except where noted explicitly (such as coverage of the non-OECD and world aggregates). For more details on the methodology, please see Boxes 1 to 3 in The Long View: Scenarios for the World Economy to 2060 and the references therein.The baseline scenario is a projection conditional on a number of assumptions, notably that countries do not carry out institutional and policy reforms. It is used as a reference point to illustrate the potential impact of structural reforms in alternative scenarios, such as those discussed in The Long View: Scenarios for the World Economy to 2060. The data for these alternative scenarios are not available here but can be obtained on request by writing to [email protected].

Main Economic Indicators (MEI) provides a wide range of indicators on recent economic developments in the 35 OECD member countries and 15 non-member countries. The indicators published in MEI have been prepared by national statistical agencies primarily to meet the requirements of users within their own country. In most instances, the indicators are compiled in accordance with international statistical guidelines and recommendations. However, national practices may depart from these guidelines, and these departures may impact on comparability between countries.

The Maritime Transport Costs (MTC)database contains data from 1991 to the most recent available year of bilateral maritime transport costs. Transport costs are available for 43 importing countries (including EU15 countries as a custom union) from 218 countries of origin at the detailed commodity (6 digit) level of the Harmonized System 1988. This dataset should only be used in conjunction with the paper Clarifying Trade Costs in Maritime Transport which outlines methodology, data coverage and caveats to its use. Key Statistical Concept Import charges represent the aggregate cost of all freight, insurance and other charges (excluding import duties) incurred in bringing the merchandise from alongside the carrier at the port of export and placing it alongside the carrier at the first port of entry in the importing country. Insurance charges are therefore included in the transport cost variables and are estimated to be approximately 1.5% of the import value of the merchandise.

These data refer to material resources, i.e. materials originating from natural resources that form the material basis of the economy: metals (ferrous, non-ferrous) non-metallic minerals (construction minerals, industrial minerals), biomass (wood, food) and fossil energy carriers. 

This dataset presents members' total use of the multilateral system i.e. both their multilateral aid ("Core contributions to") and bilateral aid channelled through ("Contributions through") multilateral organisations. These data originate from members' reporting at item-level in the CRS and are published here starting with 2011 data (item-level data for multilateral aid is not complete in CRS for earlier years).

Despite the growing importance of international trade, driven in large part by the rise of globalisation and the accompanying international fragmentation of production, the availability of statistics on price change in international merchandise trade at more graular level is still limited. To fill this data gap, the OECD has developed this new Merchandise Trade Price Index (MTPI) database using UN COMTRADE. The first release covers about 100 countries from 2011 to 2017. Indices by reporting country are available for both exports and imports, broken down by 30 products, aligned with the 2-digit level of the Classification of Products of Activity (CPA, version 2.1). Future releases are planned to expand the country coverage and the level of disaggregation.

For cross-country comparisons, data on minimum wage levels are further supplemented with another measure of minimum wages relative to average wages, that is, the ratio of minimum wages to median earnings of full-time employees. Median rather than mean earnings provide a better basis for international comparisons as it accounts for differences in earnings dispersion across countries. However, while median of basic earnings of full-time workers - i.e. excluding overtime and bonus payments - are, ideally, the preferred measure of average wages for international comparisons of minimum-to-median earnings, they are not available for a large number of countries. Minimum relative to mean earnings of full-time workers are also provided.

This dataset contains statutory and national minimum wages in 30 OECD Member countries, Brazil, Malta, Romania and the Russian Federation. For detailed country notes: see http://www.oecd.org/employment/emp/Minimum-wages.pdf

The aim of the OECD's new Skills for Jobs Indicators is to facilitate better adaptation to changing skill needs by making available a database of skill imbalances indicators that is comparable across countries and regularly updated. The Skill Needs Indicators provide an overview of the shortages and surpluses of skills across countries.

The Financial Statistics dataset contains predominantly monthly statistics, and associated statistical methodological information, for the 36 OECD member countries and some selected other countries. The dataset itself contains financial statistics on 4 separate subjects: Monetary Aggregates, Interest Rates, Exchange Rates, and Share Prices. The data series presented within these subjects have been chosen as the most relevant financial statistics for which comparable data across countries is available. In all cases a lot of effort has been made to ensure that the data are internationally comparable across all countries presented and that all the subjects have good historical time-series’ data to aid with analysis. All data are available monthly, and are presented as either an index (where the year 2015 is the base year) or as a level depending on which measure is seen as the most appropriate and/or useful in the economic analysis context.

Air pollution is considered one of the most pressing environmental and health issues across OECD countries and beyond. According to the World Health Organisation (WHO), exposure to fine particulate matter (PM2.5) and ground-level ozone (O3) have potentially the most significant adverse effects on health compared to other pollutants. PM2.5 can be inhaled and cause serious health problems including both respiratory and cardiovascular disease, having its most severe effects on children and elderly people. Exposure to PM2.5 has been shown to considerably increase the risk of heart disease and stroke in particular. For these reasons, population exposure to (outdoor or ambient) PM2.5 has been identified as an OECD Green Growth headline indicator. Exposure to ground-level ozone (O3) has serious consequences for human health, contributing to, or triggering, respiratory diseases. These include breathing problems, asthma and reduced lung function (WHO, 2016; Brauer et al., 2016). Ozone exposure is highest in emission-dense countries with warm and sunny summers. The most important determinants are background atmospheric chemistry, climate, anthropogenic and biogenic emissions of ozone precursors such as volatile organic compounds, and the ratios between different emitted chemicals.

This dataset presents trends in amounts of municipal waste generated (including household waste), and the treatment and disposal method used. The amount of waste generated in each country is related to the rate of urbanisation, the types and pattern of consumption, household revenue and lifestyles.

It presents gross capital formation, gross fixed capital formation, changes in inventories and acquisition less disposals of valuables broken down by detailed industries according to the classification ISIC rev.4. Gross fixed capital formation is also available broken down by type of assets. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. Unit of measure used - In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2005). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

It presents fixed assets by activity according to the classification ISIC rev.3 and by type of product and by type of assets.  It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. In national currency, in current prices and constant prices (national base year and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

It presents the balance sheets for non financial assets by institutional sectors, for both produced assets (fixed assets, inventories, valuables) and non-produced assets (tangible and intangible).  It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. Unit of measure used - In national currency expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

It presents the whole set of non financial accounts, from the production account to the acquisitions of non-financial assets accounts. For general government sector, property income, other current transfers and capital transfers are consolidated..

It presents the whole set of non financial accounts, from the production account to the acquisitions of non-financial assets accounts. For general government sector, property income, other current transfers and capital transfers are consolidated.. It has been prepared from statistics reported to the OECD by Member countries in their answers to the new version of the annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA.

It presents gross capital formation, gross fixed capital formation, changes in inventories and acquisition less disposals of valuables broken down by detailed industries. Gross fixed capital formation is also available broken down by type of assets. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. Unit of measure used - In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

It presents the different transactions and balances to get from the GDP to the net lending/net borrowing. Therefore, it includes, in particular, national disposable income (gross and net), consumption of fixed capital as well as net saving.

It presents the final consumption expenditure of households broken down by the COICOP (Classification of Individual Consumption According to Purpose) classification and by durability.  It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

It provides a faithful image, to the greatest extent possible, of the aggregates and balances of the general government sector in the SNA 1993 conceptual framework. In addition, it brings to light two relevant aggregates that do not belong to this conceptual frame work: the Total Revenue and the Total Expenditure of the general government sector. Unit of measure used - National currency; current prices. Expressed in millions.

Annual National Accounts>General Government Accounts>750. General Government Debt-Maastricht   Unit of measure used: National currency; current prices. Expressed in millions   Statistical population: Government debt as defined in the Maastricht Treaty (Source : Eurostat). Available for Europeans countries only. In the Protocol on the excessive deficit procedure annexed to the Maastricht Treaty, government debt is defined as the debt of the whole general government sector: gross, consolidated and nominal value (face value). It excludes the other accounts payable (AF.7), as well as, if they exist, insurance technical reserve (AF.6).

It provides a breakdown of government expenditure according to their function. To meet this end, economic flows of expenditure must be aggregated according to the Classification of the Functions of Government (COFOG).

It presents the three approaches of the GDP: expenditure based, output based and income based. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA.

Annual National Accounts>Detailed Tables and Simplified Accounts>7A. Labour input by activity, ISIC rev4   Unit of measure used: In persons, full-time equivalents, jobs and hours.   Statistical population: It presents employment, broken down by detailed industries according to the classification ISIC rev.4. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire.

It presents population data and employment by main activity. It includes national concept data for economically active population, unemployed persons, total employment, employees and self-employed, as well as domestic concept data for total employment, employees and self-employed. The domestic concept data are available broken down by main activity. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire.

It presents simplified non-financial accounts, from the gross value added to the net lending/net borrowing. In this table, the total economy is broken down in three main institutional sectors: corporations, general government, households and non-profit institutions serving households. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. Unit of measure used - In national currency, in current prices. Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

Annual National Accounts>Supply and Use Tables>30. Supply at basic prices and its transformation into purchasers' prices   Unit of measure used: In national currency, in current prices and previous year prices. Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.   Statistical population: It presents the Supply table at basic prices and its transformation into purchaser's prices. It provides information by industry (at the 2 digit ISIC Rev 4 level, containing 89 industries) with corresponding breakdowns by product (using the comparable CPA product breakdown). It has been prepared from statistics reported to the OECD by countries in their answers to Supply and Use questionnaire.

Annual National Accounts>Supply and Use Tables>SUT Indicators>SUT Indicators   Statistical population: These indicators are calculated by the OECD from the SUT statistics reported to the OECD by countries in their answers to Supply and Use questionnaire.   Key statistical concept: The supply table describes the supply of goods and services, which are either produced in the domestic industry or imported. The use table shows where and how goods and services are used in the economy. Therefore in addition to their essential role to better estimations of National Accounts, Supply and Use tables are also a very powerful tool to understand the impact of policy decisions and globalisation, as they provide a detailed analysis of the process of production and the use of goods and services. For example, the Supply and Use Tables could be used to measure the the percentage of imports used in the production process or the share of trade and transport margins in the households’ final consumption expenditure.

Annual National Accounts>Supply and Use Tables>31. Supply, Output and its components by industries   Unit of measure used: In national currency, in current prices and previous year prices. Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.   Statistical population: It presents the breakdown of output at basic prices between market output, output for own final use and non-market output, by activty at the 2 digit ISIC Rev 4 level. It has been prepared from statistics reported to the OECD by countries in their answers to Supply and Use questionnaire.

It provides a faithful image, to the greatest extent possible, of the aggregates and balances of the general government sector Data are also available, for most countries, for the sub-sectors of general government.

Annual National Accounts

Annual National Accounts>Supply and Use Tables>40. Use at purchasers' prices   Unit of measure used: In national currency, in current prices and previous year prices. Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.   Statistical population: It presents the Use table at purchaser's prices. It provides information by industry (at the 2 digit ISIC Rev 4 level, containing 89 industries) with corresponding breakdowns by product (using the comparable CPA product breakdown). It has been prepared from statistics reported to the OECD by countries in their answers to Supply and Use questionnaire.

Annual National Accounts

Annual National Accounts>Supply and Use Tables>44. Valuation Matrices   Unit of measure used: In national currency, in current prices and previous year prices. Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.   Statistical population: It presents the tables of trade and transport margins, of taxes less subsidies on products. It provides information by industry (at the 2 digit ISIC Rev 4 level, containing 89 industries) with corresponding breakdowns by product (using the comparable CPA product breakdown). It has been prepared from statistics reported to the OECD by countries in their answers to Supply and Use questionnaire.

Statistical population: Its presents output, intermediate consumption and the gross value added and its components, in particular compensation of employees and gross operating surplus and mixed income, broken down by detailed industries according to the classification ISIC rev.4. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. Unit of measure used: In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.   Note: 6A. Value added and its components by activity, ISIC rev4

Statistical population: Its presents output, intermediate consumption and the gross value added and its components, in particular compensation of employees and gross operating surplus and mixed income, broken down by detailed industries. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. Data presented in this table will not be updated after summer 2010. Data reported to the OECD by countries in their answers to the annual national accounts questionnaire are now available on theme Industry and Services, Structural Analysis (STAN) Databases. Unit of measure used: In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

This indicator measures the net costs paid by parents for full-time centre-based childcare, after any benefits designed to reduce the gross childcare fees. Childcare benefits can be received in the form of childcare allowances, tax concessions, fee rebates and increases in other benefit entitlements.

Official development assistance (ODA) is defined as government aid designed to promote the economic development and welfare of developing countries. Loans and credits for military purposes are excluded. Aid may be provided bilaterally, from donor to recipient, or channelled through a multilateral development agency such as the United Nations or the World Bank. Aid includes grants, "soft" loans and the provision of technical assistance. The OECD maintains a list of developing countries and territories; only aid to these countries counts as ODA. The list is periodically updated and currently contains over 150 countries or territories. 

Net Replacement Rates in unemployment measure the proportion of income that is maintained after 1, 2, …, T months of unemployment.

The breakdown of transactions and positions by counterpart sector enriches the information as included in the financial accounts and balance sheets by providing insight into the relationships between institutional sectors within an economy as well as between residents and non-residents. For a given financial instrument it is possible to trace the creditor-debtor relations between institutional sectors and with the rest of the world.

This dataset presents the Non-consolidated financial balance sheets by economic sector (Quarterly table 0720), according to SNA 2008 methodology. It comprises all flows, which record, by type of financial instruments, the financial transactions between institutional sectors.

The breakdown of transactions and positions by counterpart sector enriches the information as included in the financial accounts and balance sheets by providing insight into the relationships between institutional sectors within an economy as well as between residents and non-residents. For a given financial instrument it is possible to trace the creditor-debtor relations between institutional sectors and with the rest of the world.

This dataset presents the Non-consolidated financial transactions by economic sector (Quarterly table 0620), according to SNA 2008 methodology. It comprises all flows, which record, by type of financial instruments, the financial transactions between institutional sectors.

The dataset on Quarterly Sector Accounts data presents the whole set of non financial accounts for the institutional sectors.It includes the following accounts: - Production account / External account of goods and services - Generation of income account - Allocation of primary income account - Secondary distribution of income account - Use of disposable income account - Change in net worth due to saving and capital transfers accounts - Acquisitions of non-financial assets account - Balance sheets for non-financial assets - Employment by sector These accounts are designed to produce accounting balances that are of particular interest for economic analysis such as value added, operating surplus, saving or net lending/net borrowing. Quarterly Sector Accounts data have been reported to the OECD by Member countries and Key Partner countries using a standard questionnaire (simplified table T0119 or detailed table T0801). These questionnaires are designed to collect internationally comparable data according to definitions and concepts presented in the System of National Accounts (SNA 2008 or SNA 1993 for a few countries):

Non-medical determinants of health: Unhealthy lifestyles and poor environments cause millions of people to die prematurely. Smoking, harmful alcohol use, physical inactivity and obesity are the root cause of many chronic conditions. This dataset presents the latest data for tobacco consumption (including daily smokers by age and sex), vaping (by age and sex), alcohol consumption, fruits and vegetables consumption, as well as measured and self-reported data on overweight and obesity.

The indicator reports the nutrient balance of nitrogen and phosphorus – the difference between the quantity of nutrient inputs entering an agricultural system and the quantity of nutrient outputs leaving this system – for exports of nine cereal and oilseed (hence excluding pasture) as a share of the total nutrient balance for 21 countries in years 2006, 2007, 2010 and 2014. Grains covered by this indicator are wheat, maize, barley, sorghum, oats, rice soybeans, sunflower seed and rapeseed.

In this version, seven GVCs indicators are presented for 59 economies (34 OECD and 23 non-OECD economies, plus the "rest of the world" and the European Union) for 18 industries in the years 1995, 2000, 2005, 2008 and 2009. The indicators are calculated based on the five global input-output matrices of the TiVA database. More details on the aggregation and specific country notes can be downloaded at http://www.oecd.org/sti/ind/input-outputtables.htm and http://oe.cd/gvc/.

This OECD inventory maps existing cross-country surveys that provide information on the characteristics of people's jobs. The information included in this inventory covers international surveys conducted since the early 1990s that are based on individuals' self-reported assessment of their current job, for 160 countries over 25 years. Survey questions are grouped into 19 indicators. For each indicator, binary codes (1 and 0) show whether indicators are available or not for the various countries and years. The inventory also provides users with detailed documentation on the questions used in the various surveys for measuring these indicators.

The OECD Weekly Tracker of GDP growth provides a real-time high-frequency indicator of economic activity using machine learning and Google Trends data. It has a wide country coverage of OECD and G20 countries. The Tracker is thus particularly well suited to assessing activity during the turbulent period of the current global pandemic. It applies a machine learning model to a panel of Google Trends data for 46 countries, and aggregates together information about search behaviour related to consumption, labour markets, housing, trade, industrial activity and economic uncertainty.   The Weekly Tracker proxies the percent change in weekly GDP levels from the pre-crisis trend. The pre-crisis trend is taken from OECD forecasts made prior to the crisis (in the November 2019 Economic Outlook). Two other flavours of the Tracker are also available in the datafiles: a Tracker of weekly GDP growth year-on-year (that is, the percent change in weekly GDP from the same week in the past year), and a Tracker of weekly GDP growth year-on-two-year (the percent change in weekly GDP from the same week two years earlier). 

Other official flows are official sector transactions which do not meet the ODA criteria, e.g.:  i.) Grants to developing countries for representational or essentially commercial purposes;  ii.) Official bilateral transactions intended to promote development but having a grant element of less than 25 per cent;  iii.) Official bilateral transactions, whatever their grant element, that are primarily export-facilitating in purpose. This category includes by definition export credits extended directly to an aid recipient by an official agency or institution ("official direct export credits");  iv.) The net acquisition by governments and central monetary institutions of securities issued by multilateral development banks at market terms;  v.) Subsidies (grants) to the private sector to soften its credits to developing countries [see Annex 3, paragraph A3.5.iv)b)];  vi.) Funds in support of private investment.

This table contains figures on the activity of affiliates located abroad by host country in the total manufacturing, total services and total business enterprise sectors. The units used to present data in AMNE are millions of national currency for monetary variables and units for the other variables. Monetary variables are in current prices. Euro-area countries: national currency data is expressed in euro beginning with the year of entry into the Economic and Monetary Union (EMU). For years prior to the year of entry into EMU, data have been converted from the former national currency using the appropriate irrevocable conversion rate. This presentation facilitates comparisons within a country over time and ensures that the historical evolution is preserved. Please note, however, that pre-EMU euro are a notional unit and should not be used to form area aggregates or to carry out cross-country comparisons.

This table contains figures on the activity of affiliates located abroad by host country in the total manufacturing sector or in the total business sector. The units used to present data in AFA are millions of national currency for monetary variables and units for the other variables. Monetary variables are in current prices. Euro-area countries: national currency data is expressed in euro beginning with the year of entry into the Economic and Monetary Union (EMU). For years prior to the year of entry into EMU, data have been converted from the former national currency using the appropriate irrevocable conversion rate. This presentation facilitates comparisons within a country over time and ensures that the historical evolution is preserved. Please note, however, that pre-EMU euro are a notional unit and should not be used to form area aggregates or to carry out cross-country comparisons.

The International Transport Forum collects data on transport statistics on annual basis from all its Member countries. Data are collected from Transport Ministries, statistical offices and other institution designated as official data source. Variables collected are inland transport of goods (T-km), of passengers (P-km) and road injury accidents. Additional information is also gathered on containers transported by rail and sea (Tons and TEU) as well as short sea shipping data (T-km).

This dataset presents patent statistics and indicators that are suitable for tracking innovation in environment-related technologies. They allow the assessment of countries and firms' innovation performance as well as the design of governments' environmental and innovation policies.

The OECD Environment Directorate, in collaboration with the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in environment-related technologies. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' environmental and innovation policies. The patent statistics presented here are constructed using data extracted from the Worldwide Patent Statistical Database (PATSTAT) of the European Patent Office (EPO) using algorithms developed by the OECD. Consistent with other patent statistics provided in OECD.Stat, only published applications for "patents of invention" are considered (i.e. excluding utility models, petty patents, etc.). The relevant patent documents are identified using search strategies for environment-related technologies (ENV-TECH) which were developed specifically for this purpose. They allow identifying technologies relevant to environmental management, water-related adaptation and climate change mitigation. An aggregate category labelled "selected environment-related technologies" includes all of the environmental domains presented here.

The OECD Environment Directorate, in collaboration with the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in environment-related technologies. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' environmental and innovation policies. The patent statistics presented here are constructed using data extracted from the Worldwide Patent Statistical Database (PATSTAT) of the European Patent Office (EPO) using algorithms developed by the OECD. Consistent with other patent statistics provided in OECD.Stat, only published applications for "patents of invention" are considered (i.e. excluding utility models, petty patents, etc.). The relevant patent documents are identified using search strategies for environment-related technologies (ENV-TECH) which were developed specifically for this purpose. They allow identifying technologies relevant to environmental management, water-related adaptation and climate change mitigation. An aggregate category labelled "selected environment-related technologies" includes all of the environmental domains presented here.

Patents are a key measure of innovation output, as patent indicators reflect the inventive performance of countries, regions, technologies, firms, etc. They are also used to track the level of diffusion of knowledge across technology areas, countries, sectors, firms, etc., and the level of internationalisation of innovative activities. Patent indicators can serve to measure the output of R&D, its productivity, structure and the development of a specific technology/industry. The relationship between patents as an intermediate output resulting from R&D inputs has been investigated extensively. Patents are often interpreted as an output indicator; however, they could also be viewed as an input indicator, as patents are used as a source of information by subsequent inventors. Like any other indicator, patent indicators have many advantages and disadvantages. The advantages of patent indicators are :patents have a close link to invention;patents cover a broad range of technologies on which there are sometimes few other sources of data;the contents of patent documents are a rich source of information (on the applicant, inventor, technology category, claims, etc.); andpatent data are readily available from patent offices. However, patents are subject to certain drawbacks:the value distribution of patents is skewed as many patents have no industrial application (and hence are of little value to society) whereas a few are of substantial value;many inventions are not patented because they are not patentable or inventors may protect the inventions using other methods, such as secrecy, lead time, etc.;the propensity to patent differs across countries and industries;differences in patent regulations make it difficult to compare counts across countries; andchanges in patent law over the years make it difficult to analyse trends over time. 

The OECD Pensions at a Glance Database has been developed in order to serve a growing need for pensions indicators. It includes reliable and internationally comparable statistics on public and mandatory and voluntary pensions. It covers 34 OECD countries and aims to cover all G20 countries. Pensions at a Glance reviews and analyses the pension measures enacted or legislated in OECD countries. It provides an in-depth review of the first layer of protection of the elderly, first-tier pensions across countries and provideds a comprehensive selection of pension policy indicators for all OECD and G20 countries.

This dataset reports data on pharmaceutical consumption and sales, according to the Anatomical Therapeutic Chemical (ATC) classification, and on the share of generics in the pharmaceutical market.

This dataset presents annual population projections data up to 2061 by sex and five year age groups as well as the share of children, youth, the elderly, old-age and total dependency ratios. The data is available for all 38 member countries as well as for the EU27 and G20 countries, Singapore and the World total. Population projections are, in most countries, according to medium variant. (See country details for the variants retained for each demographic component of total fertility, life expectancy at birth and net annual migration).

Private transactions are those undertaken by firms and individuals resident in the reporting country.

DUE TO CHANGES IN THE METHODOLOGY THE 2018 PMR VALUES CANNOT BE COMPARED WITH PREVIOUS VINTAGES. The 2018 OECD Indicators of Product Market Regulation (PMR) are a comprehensive and internationally-comparable set of indicators that measure the degree to which laws and policies promote or inhibit competition in areas of the product and service market where competition is viable. These indicators measure the de iure regulatory environments in 34 OECD countries and in a set of non-OECD countries in 2018. The economy-wide indicators cover the extent to which the involvement of the state in the economy can generate distortions to competition and the level of the barriers to entry and expansion to domestic and foreign firms in different sectors of the economy. Users of the data must be aware that they may no longer fully reflect the current situation in fast reforming countries.

The 'Production and Sales (MEI)' dataset is a dataset containing predominantly monthly statistics, and associated statistical methodological information, for the 34 OECD member countries and for selected other economies. The Production and Sales dataset contains industrial statistics on four separate subjects: Production; Sales; Orders; and Work started. The data series presented within these subjects have been chosen as the most relevant industrial statistics for which comparable data across countries is available. For Production, data comprise Indices of industrial production (IIP) for total industry, manufacturing, energy and crude petroleum; and further disaggregation of manufacturing production for intermediate goods and for investment goods and crude steel. For others, they comprise retail trade and registration of passenger cars; and permits issued and work started for dwellings. Considerable effort has been made to ensure that the data are internationally comparable across all countries presented, coverage for as many countries as possible, and that all the subjects have reasonable length of time-series to assist analysis. Most data are available monthly and are presented as an index (where the year 2010 is the base year) or as a level depending on which measure is seen as the most appropriate and/or useful in the economic analysis context. Due to differences in statistical or economic environment at country level, however, availability of data varies from one country to another.

The OECD Productivity Database aims at providing users with the most comprehensive and the latest productivity estimates. The update cycle is on a rolling basis, i.e. each variable in the dataset is made publicly available as soon as it is updated in the OECD Annual National Accounts database. However, timely data issues may arise and affect individual series and/or individual countries. Sectors differ from each other with respect to their productivity growth. Understanding the drivers of productivity growth at the total economy level requires an understanding of the contribution of each sector. Data of real gross value added, labour compensation, hours worked and employment are sourced from the OECD Annual National Accounts.

The OECD cross-section sectoral indicators measure regulatory conditions in the professional services and retail distribution sectors. The professional services indicators cover entry and conduct regulation in the legal, accounting, engineering, and architectural professions. They are now estimated for the years 1996, 2003, around 2008 and 2013 for 34 OECD countries and for another set of non-OECD countries for 2013. Users of the data must be aware that they may no longer fully reflect the current situation in fast reforming countries. Not all data are available for all countries for all years.

This indicator measures the financial disincentives to participate in the labour market. It shows the proportion of earnings in the new job that are lost to either higher taxes or lower benefit entitlements when a jobless person takes up employment and their family claims social assistance and/or Guaranteed Minimum Income (GMI) benefits. Higher values means higher financial disincentives.

This indicator measures the financial disincentives to participate in the labour market. It calculates the proportion of earnings in the new job that are lost to either higher taxes or lower benefit entitlements when a jobless person takes up employment and claims unemployment benefits. Higher values means higher financial disincentives.

This indicator measures the financial disincentives to participate in the labour market for a jobseeker claiming unemployment benefits. It calculates the proportion of earnings that are lost to either higher taxes, lower benefits and net childcare costs when a parent with young children takes up full-time employment and uses full-time centre-based childcare. This indicators is calculated assuming that the jobseeker claims unemployment insurance and/or unemployment assistance benefits when s/he is out of work.

This indicator measures the financial disincentives to participate in the labour market. It calculates the proportion of earnings that are lost to either higher taxes, lower benefits and net childcare costs when a parent with young children takes up full-time employment and uses full-time centre-based childcare. This indicators is calculated assuming that the family claims social assitance and/or Guaranteed Minimum Income (GMI) benefits but not unemployment benefits.

The Public Sector Debt database includes quarterly detailed information on all liabilities which constitute debt instruments, by initial and residual maturity, which are held by the government, and more broadly the public sector. The debt instruments are those instruments that require the payment of principal and interest or both at some point(s) in the future. All liabilities are considered debt, except liabilities in the form of equity and investment fund shares and, financial derivatives and employee stock options.

The OECD's quarterly national accounts (QNA) dataset presents data collected from all the OECD member countries and some other major economies on the basis of a standardised questionnaire. It contains a wide selection of generally seasonally adjusted quarterly series most widely used for economic analysis from 1960 or whenever available:

This database provides a set of indicators that reflect the level and structure of central government support for business R&D; in form of R&D; tax incentives and direct funding across OECD member countries and ten non-member economies (Argentina, Brazil, Bulgaria, Croatia, Cyprus, People's Republic of China, Romania, Russian Federation, and South Africa). This includes time-series indicators of tax expenditures for R&D;, based on the latest 2017 OECD data collection on tax incentive support for R&D; expenditures that was completed in July 2017. These estimates of the cost of R&D; tax relief have been combined with data on direct R&D; funding, as compiled by National Statistical Offices based on reports from firms, in order to provide a more complete picture of government efforts to promote business R&D.; The latest indicators and information on R&D; tax incentives also feature on the dedicated OECD website Measuring R&D; tax incentives.Tax expenditures are deviations from a benchmark tax system (OECD, 2010) and countries use different national benchmarks. Available estimates typically reflect the sum of foregone tax revenues – on an accruals basis – and refunds where applicable, with no or minimal adjustments for behavior effects. Some countries only report claims realised in a given year (cash basis), while others report losses to government on an accrual basis, excluding claims referring to earlier periods and including claims for current R&D; to be used in the future. For general and country-specific notes on the estimates of government tax relief for R&D; expenditures (GTARD), see http://www.oecd.org/sti/rd-tax-stats-gtard-notes.pdfThe sources for the other indicators (direct funding of BERD, BERD and GDP) include the OECD databases on Main Science and Technology Indicators and Eurostat R&D; statistics.

The Regional database contains annual data from 1995 to the most recent available year (generally 2022 for demographic and labor market data, 2021 for regional accounts, innovation and social statistics). 

The Regional database contains annual data from 1995 to the most recent available year (generally 2018 for demographic and labor market data, 2017 for regional accounts, innovation and social statistics). The data collection is undertaken by the Center for Entrepreneurship, SMEs, Regions and Cities (CFE). Statistics are collected through an annual questionnaire sent to the delegates of the Working Party on Territorial Indicators (WPTI), and via downloads from the web-sites of National Statistical Offices and Eurostat

The OECD indicators of regulation in energy, transport and communications (ETCR) summarise regulatory provisions in seven sectors: telecoms, electricity, gas, post, rail, air passenger transport, and road freight. The ETCR indicators have been estimated in a long-time series and are therefore well suited for time-series analysis. The ETCR time series was updated, revised and now cover 34 OECD countries and a set of non-OECD countries for 2013. Users of the data must be aware that they may no longer fully reflect the current situation in fast reforming countries. Not all data are available for all countries for all years.

The PMR sector indicators measure the degree to which laws and policies promote or inhibit competition in seven network sectors (electricity, natural gas, air transport, rail transport, road transport, water transport and e-communications) and in eight service sectors (lawyers, notaries, accountants, civil engineers, architects, estate agents, retail trade and retail sales of medicines). The seven indicators for the network sectors are aggregated into a single indicator of regulation in network sectors. For more information:

The OECD cross-section sectoral indicators measure regulatory conditions in the professional services and retail distribution sectors. The retail indicators cover barriers to entry, operational restrictions, and price controls. These indicators were updated and revised; they are now estimated for 34 OECD countries for the years 1998, 2003, around 2008 and 2013 and for another set of non-OECD countries for 2013. Users of the data must be aware that they may no longer fully reflect the current situation in fast reforming countries. Not all data are available for all countries for all years.

International comparisons of taxes and charges on road haulage require a framework that can relate all the various taxes and charges levied on transport activities to marginal costs, if they are to provide satisfactory answers to the following types of question: -Do hauliers in one country pay more than in the other, and what impact does this have on the profitability of haulage in each country? -Is the impact of an increase in tax on diesel the same in each country or are differences in the taxation of labour more significant? -Do these differences distort the international haulage market? The 2003 ECMT Report 'Reforming Transport Taxes' developed a methodology for making such comparisons. The database presents information on vehicle taxes, fuel excise duties and user charges and takes also into account any possible refunds, rebates and exemptions. These data allow for comparison of road freight transport fiscal regimes in different countries in quantitative terms. In order to allow for comparisons of road freight taxation regimes in different countries, net taxation levels are calculated for a standard domestic haul (400-km domestic hauls with 40 tonne trucks). These results are then assessed per vehicle-km and per tonne-kilometre.

Although there are clear definitions for all the terms used in this survey, countries might have different methodologies to calculate tonne-kilometre and passenger-kilometres. Methods could be based on traffic or mobility surveys, use very different sampling methods and estimating techniques which could affect the comparability of their statistics. Also, if the definition on road fatalities is very clear and well applied by most countries, this is not the case for road injuries. Indeed, not only countries might have different definitions but the important underreporting of road injuries in most countries can distort analysis based on these data. 

Demand for statistics on business demography has grown and developed considerably in recent years. Data on births and deaths of enterprises, their life expectancy and the important role they play in economic growth and productivity, as well as the information they provide for tackling social demographic issues, are increasingly requested by policy makers and analysts alike. Business demography is a core element of the OECD’s Entrepreneurship Indicators Project, where the OECD and Eurostat are collaborating to develop a framework for the regular and harmonised measurement of entrepreneurial activity and the factors that enhance or impede it. The data in this database is presented in International Standard of Industrial Classification (ISIC Revision 4).

The OECD Secretariat collects a wide range of statistics on businesses and business activity. This database features the data collection of the Statistics Directorate relating to a number of key variables, such as value added, operating surplus, employment, and the number of business units, for example, broken down by 4-digit International Standard of Industrial Classification (ISIC Revision 4) industry groups (including the service sector)), referred to as the Structural Statistics on Industry and Services (SSIS) database; and by size class; referred to as the Business Statistics by Size Class (BSC) database.

The aim of the OECD’s new Skills for Jobs Indicators is to facilitate better adaptation to changing skill needs by making available a database of skill imbalances indicators that is comparable across countries and regularly updated. The Skill Needs Indicators provide an overview of the shortages and surpluses of skills across countries.

The aim of the OECD's new Skills for Jobs Indicators is to facilitate better adaptation to changing skill needs by making available a database of skill imbalances indicators that is comparable across countries and regularly updated. The Skill Needs Indicators provide an overview of the shortages and surpluses of skills across countries.

The aim of the OECD’s new Skills for Jobs Indicators is to facilitate better adaptation to changing skill needs by making available a database of skill imbalances indicators that is comparable across countries and regularly updated. The Skill Needs Indicators provide an overview of the shortages and surpluses of skills across countries.

The SIGI is built on 27 innovative variables measuring discriminatory social institutions, which are grouped into 4 dimensions: discrimination in the family, restricted physical integrity, restricted access to productive and financial resources, and restricted civil liberties.Lower values indicate lower levels of discrimination in social institutions: the SIGI ranges from 0% for no discrimination to 100% for very high discrimination.

The OECD’s Social Benefit Recipients Database (SOCR) presents, for the first time, comparable information on the number of people receiving cash benefits. SOCR includes data for the main income replacement programmes in the unemployment, social assistance, disability and old-age branches. It currently covers eight years (2007-2014) for most OECD and EU countries

A good complement to the number of recipients of social benefits is the number of individuals belonging to population groups that are close to the target of social benefits. The database SOCR includes a number of series providing these reference populations. For example: old-age pensions are mainly targeted on individuals of retirement age, the over 65 population is provided; unemployment benefits go to jobseekers, the number of unemployed (ILO definition) is provided.

Input-Output tables describe the sale and purchase relationships between producers and consumers within an economy. They can be produced by illustrating flows between the sales and purchases (final and intermediate) of industry outputs or by illustrating the sales and purchases (final and intermediate) of product outputs. The OECD Input-Output database is presented on the former basis, reflecting in part the collection mechanisms for many other data sources such as research and development Research and Development expenditure data, employment statistics, pollution data, energy consumption, which are in the main collected by enterprise or by establishment, and thus according to industry classifications.

Input-Output tables describe the sale and purchase relationships between producers and consumers within an economy. They can be produced by illustrating flows between the sales and purchases (final and intermediate) of industry outputs or by illustrating the sales and purchases (final and intermediate) of product outputs. The OECD Input-Output database is presented on the former basis, reflecting in part the collection mechanisms for many other data sources such as research and development Research and Development expenditure data, employment statistics, pollution data, energy consumption, which are in the main collected by enterprise or by establishment, and thus according to industry classifications.

Input-Output tables describe the sale and purchase relationships between producers and consumers within an economy. They can be produced by illustrating flows between the sales and purchases (final and intermediate) of industry outputs or by illustrating the sales and purchases (final and intermediate) of product outputs. The OECD Input-Output database is presented on the former basis, reflecting in part the collection mechanisms for many other data sources such as Research and Development expenditure data, employment statistics, pollution data, energy consumption, which are in the main collected by enterprise or by establishment, and thus according to industry classifications.

Input-Output tables describe the sale and purchase relationships between producers and consumers within an economy. They can be produced by illustrating flows between the sales and purchases (final and intermediate) of industry outputs or by illustrating the sales and purchases (final and intermediate) of product outputs. The OECD Input-Output database is presented on the former basis, reflecting in part the collection mechanisms for many other data sources such as research and development Research and Development expenditure data, employment statistics, pollution data, energy consumption, which are in the main collected by enterprise or by establishment, and thus according to industry classifications.

Input-Output tables describe the sale and purchase relationships between producers and consumers within an economy. They can be produced by illustrating flows between the sales and purchases (final and intermediate) of industry outputs or by illustrating the sales and purchases (final and intermediate) of product outputs. The OECD Input-Output database is presented on the former basis, reflecting in part the collection mechanisms for many other data sources such as research and development Research and Development expenditure data, employment statistics, pollution data, energy consumption, which are in the main collected by enterprise or by establishment, and thus according to industry classifications.

Excess capacity is one of the main challenges facing the global steel sector. The OECD Steelmaking Capacity database contains data on crude steelmaking capacity by economy and provides researchers and policymakers with an important tool for analysing steel capacity developments.

Data cited at: OECD (2020), Suicide rates (indicator). doi: 10.1787/a82f3459-en (Accessed on 18 August 2020) Suicide rates are defined as the deaths deliberately initiated and performed by a person in the full knowledge or expectation of its fatal outcome. Comparability of data between countries is affected by a number of reporting criteria, including how a person's intention of killing themselves is ascertained, who is responsible for completing the death certificate, whether a forensic investigation is carried out, and the provisions for confidentiality of the cause of death. Caution is required therefore in interpreting variations across countries. The rates have been directly age-standardised to the 2010 OECD population to remove variations arising from differences in age structures across countries and over time. The original source of the data is the WHO Mortality Database. This indicator is presented as a total and per gender and is measured in terms of deaths per 100 000 inhabitants (total), per 100 000 men and per 100 000 women.

The OECD Sustainable Ocean Economy Database synthesizes available ocean-related datasets and indicators from across the Organisation to improve their discoverability and comparability. The database brings together relevant indicators from the Environment Directorate (ENV), the Trade and Agriculture Directorate (TAD), the Centre for Entrepreneurship, SMEs, Regions and Cities (CFE), the International Transport Forum (ITF), the International Energy Agency (IEA), and others.

TALIS averages are based on all countries participating in the TALIS survey, including partner countries and economies. This explains the difference between the OECD average and the TALIS average. Data from the TALIS survey and Education at a Glance (EAG) may differ. See Annex E of the TALIS technical report and Annex 3 of EAG for more details about the data collections.

This indicator reports the import-weighted applied tariffs on environmentally related goods as defined in the Combined List of Environmental Goods (CLEG) in percentage points for all countries between 2003 and 2016.

The OECD Teaching and Learning International Survey (TALIS) is an international, large-scale survey of teachers, school leaders and the learning environment in schools. TALIS uses questionnaires administered to teachers and their school principals to gather data. Its main goal is to generate internationally comparable information relevant to developing and implementing policies focused on school leaders, teachers and teaching, with an emphasis on those aspects that affect student learning.

Because of the limited availability of official statistics on national supply-use and input-output tables in recent years – reflecting the fact that these are only typically available at best two or three years after the reference period to which they refer – TiVA indicators for the most recent years, as displayed in this dataset, are estimated using now-casting techniques. The approach (described in more detail in the accompanying methodological note) in essence estimates national input-output tables by projecting relationships observed in the latest TiVA benchmark year (currently 2011) into nowcast years (currently 2012-2014) but constrained to official estimates of gross output and value-added by industry and national accounts main aggregates of demand and trade, and supplemented by bilateral trade statistics, all of which are available throughout the nowcast period. Importantly, the projections of relationships in 2011 into 2012 are determined using a volume approach, to account for possible distortions that might be introduced – by for example differential price movements in imports and domestic production – if projections were made using nominal relationships. These estimates are then reflated into current prices, and simultaneously balanced – consistent with official volume and current price estimates of trade, demand and activity – to arrive at a balanced national input-output table in 2012, in nominal terms as well as in prices of 2011. Estimates for 2013 and 2014 are calculated in the same manner but using, respectively, the 2012 and 2013 relationships as the starting point.

Note: 2017 figures are Preliminary. Official and Private Flows - Disbursements and Commitments. Aggregate data (no breakdown by recipient) on ODA, OOF, private and NGO data by donor, type of aid and flow. The data cover flows from all bilateral and multilateral donors except for Tables DAC1, DAC4, DAC5 and DAC7b which focus on flows from DAC member countries and the EU Institutions.

Official Development Financing (ODF), measured for recipient countries only, is defined as the sum of their receipts of bilateral ODA, concessional and non-concessional resources from multilateral sources, and bilateral other official flows made available for reasons unrelated to trade, in particular loans to refinance debt.

Total Official Flows: the sum of Official Development Assistance (ODA) and Other Official Flows (OOF) represents the total (gross or net) disbursements by the official sector at large to the recipient country shown.

Total Receipts, Net: in addition to Official Development Assistance, this heading includes in particular: other official bilateral transactions which are not concessional or which, even though they have concessional elements, are primarily trade facilitating in character (i.e., "Other Official Flows''); changes in bilateral long-term assets of the private non-monetary and monetary sectors, in particular guaranteed export credits, private direct investment, portfolio investment and, to the extent they are not covered in the preceding headings, loans by private banks. Flows from the multilateral sector which are not classified as concessional are also included here.

This table presents export/import information by detailed activity sectors (ISIC Rev.4)

This dataset shows import and export values (in millions of UDS) using product classification at 2-digit level of CPA classification.

This dataset presents data by export intensity, that is the share of exports on total turnover.

The central issue of trade by enterprise characteristics is to disaggregate trade flows according the characteristics of the enterprises engaged in cross-border transactions. The feasibility of doing so largely depends on the possibility of using or developing common identifiers between the trade register and the business register. Countries differ in their ability to perform such a linking, and matching ratios (between business and trade registers) vary across countries, and as a consequence the degree of representativeness of the results also varies across countries.

This dataset presents data by type of ownership, that is foreign or domestically controlled enterprise (with or without own affiliates abroad).

This table presents export/import information by enterprise size class and partner country.

This dataset shows the number of exporters and importers and their associated trade values for a selected set of partner countries and zones, broken down by three economic sectors: industry, trade and repair and other sectors. Total values for the wide economy are also displayed.Recommended uses and limitations EU countries break down trade data into Intra- and extra- EU zones, whereas non EU countries report their Total trade. Trade values have been aggregated for EU countries and Total (Intra-EU plus Extra-EU) trade flows are displayed, whereas Intra and Extra-EU data expressed in term of number of enterprises cannot be summed up, because of possible double-counting (same enterprise can be trader in both intra- and extra- EU trade). Data have been collected in ISIC revision 3 from 2003 up to 2007 and in ISIC revision 4 as from reference year 2008. Time series are affected by this change in classification, and thus data are displayed into two separate databases.

The central issue of trade by enterprise characteristics is to disaggregate trade flows according the characteristics of the enterprises engaged in cross-border transactions. The feasibility of doing so largely depends on the possibility of using or developing common identifiers between the trade register and the business register. Countries differ in their ability to perform such a linking, and matching ratios (between business and trade registers) vary across countries, and as a consequence the degree of representativeness of the results also varies across countries.

This dataset shows imports/exports by type of trader that is exporter only, importer only or both importer and exporter (Two-way trader).

The Trade in eMployment (TiM) database is a collection of labour market indicators designed to provide additional insights into global production networks and supply chains and complement Trade in Value Added (TiVA) indicators (http://oe.cd/tiva). Estimates of employment or compensation of employees embodied in foreign final demand (or in gross exports) can reveal the extent to which a country's workforce depends on its integration into the global economy. The TiM database includes indicators based on employment and compensation of employees for 51 and 64 economies respectively (including all European Union, OECD and G20 member countries and most East and Southeast Asian economies), as well as region aggregates, for the years 2005-2015. Indicators are available for 36 industries within a hierarchy based on ISIC Rev.4. The indicators are calculated using the 2018 edition of OECD's Inter-Country Input-Output (ICIO) tables (see http://oe.cd/icio) together with recent estimates of employment and compensation of employees by industrial activity from official sources.

This indicator reports the amount of exports and imports of environmentally-related goods as defined in the Combined List of Environmental Goods (CLEG) in current USD for all countries between 2003 and 2016.

The TiVA database contains a range of indicators measuring the value added content of international trade flows and final demand. The indicators are derived from the 2016 version of OECD's Inter-Country Input-Output (ICIO) Database.  The ICIO has been constructed from various national and international data sources all drawn together and balanced under constraints based on official (SNA93) National Accounts by economic activity and National Accounts main aggregates.  Underlying sources used are notably:  • National supply and use tables (SUTs)  • National and harmonised Input-Output Tables • Bilateral trade in goods by industry and end-use category (BTDIxE) and  • Bilateral trade in services.  Compared to the old versions of the TiVA database, this current version includes two more countries, Morocco and Peru. The data are presented for all years from 1995 to 2011. The industry breakdown remains the same. 

The Trade in Value Added (TiVA) database consists of a set of measures that aim to provide better insights into global production networks and supply chains than is possible with conventional trade statistics.   The Origin of value added in final demand presented here, is derived from the latest version of OECD’s Inter-Country Input-Output (ICIO) database and provides estimates of final demand in country c for industry i final goods and services, broken down by the value added originating from source industry j in source country s.   In other words, it reveals how the value of final demand goods and services consumed within a country is an accumulation of value generated by many industries in many countries.   For a description of the method used for calculating these estimates using the ICIO   Domestic value added origin is shown where source country s = c and, for convenience, also represented by source country = “DXD: Domestic”.   From this data cube, a range of final demand-based measures can be derived including those in TiVA principal indicators cube such as: • Domestic value added embodied in foreign final demand, FFD_DVA and related partner shares FFD_DVApSH. • Foreign value added embodied in domestic final demand, DFD_FVA and related partner shares DFD_FVApSH.

The Trade-in Value Added (TiVA) database consists of a set of measures that aim to provide better insights into global production networks and supply chains than is possible with conventional trade statistics.   The Origin of value-added in gross imports presented here is derived from the latest version of OECD’s Inter-Country Input-Output (ICIO) database. It provides estimates of gross imports by country c of goods and services from industry in partner country/region p broken down by value-added originating from source country/region s.   In other words, the four dimensions link the imports of country c to the value-added from source country s embodied in the exports of industry in the exporting country p - thus revealing how the value of a country’s gross imports of intermediate and final products from a particular partner is an accumulation of value generated by many countries.   For a description of the method used for calculating these estimates, using the ICIO   From this data cube, a range of gross imports-based measures can be derived including the following found in the main TiVA indicators database: • Total gross imports by industry, IMGR (c, i): set exporting country p = World and source country s = World. • Domestic value-added content of gross imports by partner and industry, IMGR_DVA (c, i, p): set source country s = importing country c. • Share of IMGR_DVA in relation to IMGR: IMGR_DVAsh (c, i, p).   Note that the same value-added originating from source country s can be present in the gross imports of more than one importing country c (as embodied value-added, from upstream production, may cross national borders many times). In general, therefore, these estimates should be viewed from the perspective of an importing country c.

The indicator reports the amount of exports and imports of waste and scrap as defined in Kellenberg (2012) in current USD and in kilograms for all countries between 2003 and 2016.

The lack of common definitions and practices to measure transport infrastructure spending hinders comparisons between countries and spending options. Data for road and rail infrastructure are the most comprehensive while data on sea port and airport spending are less detailed in coverage and definition. While our survey covers all sources of financing a number of countries exclude private spending, including Japan and India. Around 65% of countries report data on urban spending while for the remaining countries data on spending in this area are missing. Indicators such as the share of GDP needed for investment in transport infrastructure, depend on a number of factors, such as the quality and age of existing infrastructure, maturity of the transport system, geography of the country and transport-intensity of its productive sector. Caution is therefore required when comparing investment data between countries. However, data for individual countries and country groups are consistent over time and useful for identifying underlying trends and changes in levels of spending, especially for inland transport infrastructure. These issues of definitions and methods are addressed in a companion report Understanding the Value of Transport Infrastructure – Guidelines for macro-level measurement of spending and assets (ITF/OECD2013) that aims to improve the international collection of related statistics.

This data set is a combination of three tables, 1. Good Transport- Inland freight 2. Passenger transport 3. Transport Safety- Road injury accidents- Road CausalitiesThe geographical area covered is the ITF member countries.The International Transport Forum collects data on transport statistics on annual basis from all its Member countries. Data are collected from Transport Ministries, statistical offices and other institution designated as official data source.TEU (Twenty-foot Equivalent Unit): a statistical unit based on an ISO container of 20 foot length (6.10 m) to provide a standardised measure of containers of various capacities and for describing the capacity of container ships or terminals. one 20 Foot ISO container equals 1 TEU.  

This dataset contains data on the share of the five durations - less than 1 month, >1 month and < 3 months, >3 months and <6 months, >6 months and <1 year, 1 year and over - of unemployment among total unemployment by sex and by standardised age groups (15-19, 15-24, 20-24, 25-54, 55+, total).

In the OECD Entrepreneurship Financing Database venture capital is made up of the sum of early stage (including pre-seed, seed, start-up and other early stage) and later stage venture capital. As there are no harmonised definitions of venture capital stages across venture capital associations and other data providers, original data have been re-aggregated to fit the OECD classification of venture capital by stages. Korea, New Zealand, the Russian Federation and South Africa do not provide breakdowns of venture capital by stage that would allow meaningful international comparisons.

This dataset contains age wage gaps defined as the difference between mean (median) earnings of 25-54 year-olds and that of 15-24 year-olds (respectively 55-64 year-olds) relative to mean (median) earnings of 25-54 year-olds. Earnings refer to gross earnings of full-time dependent employees unless otherwise indicated.

This dataset presents national-level data on water made available for use, by sector. The interpretation of those data should take into account some variations in countries' definitions, as reflected in metadata. Data source(s): Joint OECD/Eurostat questionnaire on Inland Waters. Data for non-OECD countries is sourced from UNSD (https://unstats.un.org/unsd/envstats/country_files)

World Indicators of Skills for Employment (WISE) provide a comprehensive system of information relating to skills development. WISE presents countries with data upon which they can design skills policies and programs and monitor their impact on key outcomes, including responsiveness to current and emerging patterns of labour market demand, employability, productivity, health status, gender equity and lifelong learning.The database covers the period from 1990 to the present and consists of five inter-related domains of indicators:Contextual factors drive both the supply of and demand for skills.Skill acquisition covers investments in skills, the stock of human capital and its distribution.Skill requirements measure the demand for skills arising in the labour market.The degree of matching captures how well skills obtained through education and training correspond to the skills required in the labour market.Outcomes reflect the impact of skills on economic performance and employment and social outcomes.