Ocorreu um erro. Detalhes Ocultar
Você tem páginas não gravadas. Restaurar Cancelar

Eurostat

Eurostat is the statistical office of the European Union situated in Luxembourg. Its task is to provide the European Union with statistics at European level that enable comparisons between countries and regions and to promote the harmonisation of statistical methods across EU member states and candidates for accession as well as EFTA countries.

Todos os conjuntos de dados:  E I
  • E
    • abril 2019
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 20 abril, 2019
      Selecionar Conjunto de dados
      This indicator is defined as the value at market prices of EU imports from the DAC countries, as they have been determined by the OECD Development Assistance Committee. The indicator is successively broken down by income groups of countries referring to the World Bank definition. DAC (Development Assistance Committee) countries refer to developing countries and territories on Part I of the OECD/DAC list of Aid Recipients for which there is a long-standing United Nations target of 0.7% of donors' gross national product.
    • março 2018
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 12 março, 2018
      Selecionar Conjunto de dados
      International trade in goods statistics are an important data source for many public and private sector decision-makers at international, European Union and national level. For example, at the European Union level, international trade data are extensively used for multilateral and bilateral negotiations within the framework of the common commercial policy, to define and implement anti-dumping policy, to evaluate the progress of the Single Market and many other policies. Moreover, they constitute an essential source for the compilation of balance of payments statistics and national accounts. International trade in goods statistics cover both extra- and intra-EU trade: Extra-EU trade statistics cover the trading of goods between Member States and a non-member countries. Intra-EU trade statistics cover the trading of goods between Member States. "Goods" means all movable property including electricity. Detailed and aggregated data are published for the Euro area, the European Union and for each Member State separately. Main components: Data record the monthly trade between Member States in terms of arrivals and dispatches of goods as well as the monthly trade in terms of imports and exports between Member States and non-member countries. However, in publications only the term “exports” for all outward flows and “imports” for all inward flows are applied for both intra-EU trade and extra-EU trade. Extra-EU trade imports and exports are recorded in the Member State where the goods are placed under the customs procedures. Extra-EU trade statistics do not record goods in transit, goods placed into customs warehouses or goods for temporary admission. Data sources: The statistical information is mainly provided by the traders on the basis of Customs (extra-EU) and Intrastat (intra-EU) declarations. Data are collected by the competent national authorities of the Member States and compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Classification systems: - Product classification: For detailed data, products are disseminated according to the Combined Nomenclature (CN8), which first six digit codes coincide with the Harmonized Commodity Description and Coding System (HS), products are disseminated as well according to the Standard International Trade Classification (SITC) and the Broad Economic Categories (BEC). - Country classification: The Geonomenclature is used for classifying reporting countries and trading partners. Nomenclatures and correspondence tables are available at the Eurostat’s classification server RAMON. The following basic information is provided by Eurostat: - reporting country, - reference period, - trade flow, - product, - trading partner - mode of transport. Detailed data are disseminated according to the Combined Nomenclature (HS2, HS4, HS6 and CN8 levels) for the following indicators: - trade value (in Euro), - trade quantity in 100 kg, - trade quantity in supplementary units (published for some goods according to the Combined Nomenclature). Aggregated data cover both short and long term indicators. Short term indicators are disseminated according to major SITC and BEC groups for the following indicators: - gross and seasonally adjusted trade value (in million Euro), - unit-value indices, - gross and seasonally adjusted volume indices, - growth rates of trade values and indices. Long term indicators are disseminated according to major SITC groups for the following indicators: - trade value (in billion Euro), - shares of Member States in EU and world trade, - shares of main trading partners in EU trade, - volume indices. Adjustments are applied by the Member States to compensate the impact of exemption thresholds, which release the information providers from statistical formalities, as well as, to take into account the late or not response of the providers. In addition, Eurostat applies seasonal adjustments to aggregated time series.
    • março 2018
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 12 março, 2018
      Selecionar Conjunto de dados
      20.1. Source data
    • março 2018
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 12 março, 2018
      Selecionar Conjunto de dados
      20.1. Source data
    • setembro 2016
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 02 outubro, 2016
      Selecionar Conjunto de dados
    • setembro 2016
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 05 outubro, 2016
      Selecionar Conjunto de dados
    • setembro 2014
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 28 novembro, 2015
      Selecionar Conjunto de dados
    • setembro 2016
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 02 outubro, 2016
      Selecionar Conjunto de dados
    • outubro 2018
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 03 novembro, 2018
      Selecionar Conjunto de dados
      The table shows the breakdown of the Extra-EU imports by invoicing currency and by the main product groups. Shares by invoicing currency are calculated, within each product group, on the total flow.
  • I
    • julho 2019
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 04 julho, 2019
      Selecionar Conjunto de dados
      ANNUAL Annual data on quantities for crude oil, petroleum products, natural gas and manufactures gases, electricity and derived heat, solid fossil fuels, renewables and wastes covering the full spectrum of the energy sector from supply through transformation to final consumption oby sector and fuel type. Also, annual imports and exports data of various energy carriers by country of origin and destination, as well as infrastructure information. Data on annual statistics are collected by standard questionnaires according to Annex B of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics   MONTHLY The monthly energy data collections cover the most important energy commodities: Crude oil & Petroleum productsNatural gasSolid fuelsElectricity For each of the above mentioned commodities the inflowing data are delivered by the reporting countries to Eurostat via separate dedicated questionnaires. Data on monthly statistics are collected by standard questionnaires according to Annex C of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics   SHORT-TERM MONTHLY Short-term monthly energy data collections cover the most important energy commodities: Oil & petroleum productsNatural gasElectricity Short-term monthly data provides information on main flows (quantities) on the supply side. Data on monthly short term statistics are collected by standard questionnaires according to Annex D of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics
    • outubro 2019
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 17 outubro, 2019
      Selecionar Conjunto de dados
      Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Constructions (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Producer (output) prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.
    • outubro 2019
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 17 outubro, 2019
      Selecionar Conjunto de dados
      Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Constructions (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Producer (output) prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.
    • outubro 2019
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 17 outubro, 2019
      Selecionar Conjunto de dados
      Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Constructions (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Producer (output) prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.
    • outubro 2019
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 17 outubro, 2019
      Selecionar Conjunto de dados
      Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Constructions (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Producer (output) prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.
    • outubro 2019
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 17 outubro, 2019
      Selecionar Conjunto de dados
      Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Constructions (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Producer (output) prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.
    • outubro 2019
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 17 outubro, 2019
      Selecionar Conjunto de dados
      Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Constructions (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Producer (output) prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.
    • abril 2016
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 02 abril, 2016
      Selecionar Conjunto de dados
      Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.
    • maio 2018
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 18 junho, 2018
      Selecionar Conjunto de dados
    • junho 2018
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 16 junho, 2018
      Selecionar Conjunto de dados
    • junho 2018
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 16 junho, 2018
      Selecionar Conjunto de dados
    • setembro 2019
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 16 setembro, 2019
      Selecionar Conjunto de dados
      Imports are recorded by country of origin, exports by country of destination; quantities are regarded as imported or exported when they have crossed the political boundaries of the country, whether customs clearance has taken place or not.  The concept of the physical movement of flows applies. The monthly imports and exports data collections cover following energy commodities:solid  fuels (hard coal only)oil and petroleum productsgaselectricity      For solid fuels, crude oil and NGLs, imports and exports are reported by country of ultimate origin, respectively destination, while natural gas, refinery products and feedstocks as well as electricity are reported as coming from the country of last consignment. Quantities of crude oil and petroleum products imported or exported under processing agreements (i.e. refining on account) should be included. However, transit trade, international marine and aviation bunkers are excluded from this data set. Please note that this is different from the definition of natural gas trade in the annual gas questionnaire and from the definition in the previous monthly oil and gas questionnaire (before January 2013). For further information, please consult the Energy Statistics Regulation (Regulation (EC) 1099/2008 on energy statistics) and the reporting instructions. Monthly imports and exports of energy commodities cover the full spectrum of the 28 Member States of the European Union, EFTA States, candidate countries and potential candidates. Â
    • junho 2018
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 16 junho, 2018
      Selecionar Conjunto de dados
    • setembro 2019
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 17 setembro, 2019
      Selecionar Conjunto de dados
      Imports are recorded by country of origin, exports by country of destination; quantities are regarded as imported or exported when they have crossed the political boundaries of the country, whether customs clearance has taken place or not.  The concept of the physical movement of flows applies. The monthly imports and exports data collections cover following energy commodities:solid  fuels (hard coal only)oil and petroleum productsgaselectricity      For solid fuels, crude oil and NGLs, imports and exports are reported by country of ultimate origin, respectively destination, while natural gas, refinery products and feedstocks as well as electricity are reported as coming from the country of last consignment. Quantities of crude oil and petroleum products imported or exported under processing agreements (i.e. refining on account) should be included. However, transit trade, international marine and aviation bunkers are excluded from this data set. Please note that this is different from the definition of natural gas trade in the annual gas questionnaire and from the definition in the previous monthly oil and gas questionnaire (before January 2013). For further information, please consult the Energy Statistics Regulation (Regulation (EC) 1099/2008 on energy statistics) and the reporting instructions. Monthly imports and exports of energy commodities cover the full spectrum of the 28 Member States of the European Union, EFTA States, candidate countries and potential candidates.
    • maio 2018
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 18 junho, 2018
      Selecionar Conjunto de dados
    • maio 2018
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 18 junho, 2018
      Selecionar Conjunto de dados
    • julho 2019
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 04 julho, 2019
      Selecionar Conjunto de dados
      ANNUAL Annual data on quantities for crude oil, petroleum products, natural gas and manufactures gases, electricity and derived heat, solid fossil fuels, renewables and wastes covering the full spectrum of the energy sector from supply through transformation to final consumption oby sector and fuel type. Also, annual imports and exports data of various energy carriers by country of origin and destination, as well as infrastructure information. Data on annual statistics are collected by standard questionnaires according to Annex B of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics   MONTHLY The monthly energy data collections cover the most important energy commodities: Crude oil & Petroleum productsNatural gasSolid fuelsElectricity For each of the above mentioned commodities the inflowing data are delivered by the reporting countries to Eurostat via separate dedicated questionnaires. Data on monthly statistics are collected by standard questionnaires according to Annex C of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics   SHORT-TERM MONTHLY Short-term monthly energy data collections cover the most important energy commodities: Oil & petroleum productsNatural gasElectricity Short-term monthly data provides information on main flows (quantities) on the supply side. Data on monthly short term statistics are collected by standard questionnaires according to Annex D of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics
    • outubro 2019
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 16 outubro, 2019
      Selecionar Conjunto de dados
    • abril 2015
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 18 dezembro, 2015
      Selecionar Conjunto de dados
    • julho 2019
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 04 julho, 2019
      Selecionar Conjunto de dados
      ANNUAL Annual data on quantities for crude oil, petroleum products, natural gas and manufactures gases, electricity and derived heat, solid fossil fuels, renewables and wastes covering the full spectrum of the energy sector from supply through transformation to final consumption oby sector and fuel type. Also, annual imports and exports data of various energy carriers by country of origin and destination, as well as infrastructure information. Data on annual statistics are collected by standard questionnaires according to Annex B of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics   MONTHLY The monthly energy data collections cover the most important energy commodities: Crude oil & Petroleum productsNatural gasSolid fuelsElectricity For each of the above mentioned commodities the inflowing data are delivered by the reporting countries to Eurostat via separate dedicated questionnaires. Data on monthly statistics are collected by standard questionnaires according to Annex C of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics   SHORT-TERM MONTHLY Short-term monthly energy data collections cover the most important energy commodities: Oil & petroleum productsNatural gasElectricity Short-term monthly data provides information on main flows (quantities) on the supply side. Data on monthly short term statistics are collected by standard questionnaires according to Annex D of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics
    • julho 2019
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 08 julho, 2019
      Selecionar Conjunto de dados
      ANNUAL Annual data on quantities for crude oil, petroleum products, natural gas and manufactures gases, electricity and derived heat, solid fossil fuels, renewables and wastes covering the full spectrum of the energy sector from supply through transformation to final consumption oby sector and fuel type. Also, annual imports and exports data of various energy carriers by country of origin and destination, as well as infrastructure information. Data on annual statistics are collected by standard questionnaires according to Annex B of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics   MONTHLY The monthly energy data collections cover the most important energy commodities: Crude oil & Petroleum productsNatural gasSolid fuelsElectricity For each of the above mentioned commodities the inflowing data are delivered by the reporting countries to Eurostat via separate dedicated questionnaires. Data on monthly statistics are collected by standard questionnaires according to Annex C of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics   SHORT-TERM MONTHLY Short-term monthly energy data collections cover the most important energy commodities: Oil & petroleum productsNatural gasElectricity Short-term monthly data provides information on main flows (quantities) on the supply side. Data on monthly short term statistics are collected by standard questionnaires according to Annex D of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics
    • julho 2019
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 08 julho, 2019
      Selecionar Conjunto de dados
      ANNUAL Annual data on quantities for crude oil, petroleum products, natural gas and manufactures gases, electricity and derived heat, solid fossil fuels, renewables and wastes covering the full spectrum of the energy sector from supply through transformation to final consumption oby sector and fuel type. Also, annual imports and exports data of various energy carriers by country of origin and destination, as well as infrastructure information. Data on annual statistics are collected by standard questionnaires according to Annex B of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics   MONTHLY The monthly energy data collections cover the most important energy commodities: Crude oil & Petroleum productsNatural gasSolid fuelsElectricity For each of the above mentioned commodities the inflowing data are delivered by the reporting countries to Eurostat via separate dedicated questionnaires. Data on monthly statistics are collected by standard questionnaires according to Annex C of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics   SHORT-TERM MONTHLY Short-term monthly energy data collections cover the most important energy commodities: Oil & petroleum productsNatural gasElectricity Short-term monthly data provides information on main flows (quantities) on the supply side. Data on monthly short term statistics are collected by standard questionnaires according to Annex D of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics
    • outubro 2019
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 17 outubro, 2019
      Selecionar Conjunto de dados
      International trade in goods statistics are an important data source for many public and private sector decision-makers at international, European Union and national level. For example, at the European Union level, international trade data are extensively used for multilateral and bilateral negotiations within the framework of the common commercial policy, to define and implement anti-dumping policy, to evaluate the progress of the Single Market and many other policies. Moreover, they constitute an essential source for the compilation of balance of payments statistics and national accounts. International trade in goods statistics cover both extra- and intra-EU trade: Extra-EU trade statistics cover the trading of goods between Member States and a non-member countries. Intra-EU trade statistics cover the trading of goods between Member States. "Goods" means all movable property including electricity. Detailed and aggregated data are published for the Euro area, the European Union and for each Member State separately. Main components: Data record the monthly trade between Member States in terms of arrivals and dispatches of goods as well as the monthly trade in terms of imports and exports between Member States and non-member countries. However, in publications only the term “exports” for all outward flows and “imports” for all inward flows are applied for both intra-EU trade and extra-EU trade. Extra-EU trade imports and exports are recorded in the Member State where the goods are placed under the customs procedures. Extra-EU trade statistics do not record goods in transit, goods placed into customs warehouses or goods for temporary admission. Data sources: The statistical information is mainly provided by the traders on the basis of Customs (extra-EU) and Intrastat (intra-EU) declarations. Data are collected by the competent national authorities of the Member States and compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Classification systems: - Product classification: For detailed data, products are disseminated according to the Combined Nomenclature (CN8), which first six digit codes coincide with the Harmonized Commodity Description and Coding System (HS), products are disseminated as well according to the Standard International Trade Classification (SITC) and the Broad Economic Categories (BEC). - Country classification: The Geonomenclature is used for classifying reporting countries and trading partners. Nomenclatures and correspondence tables are available at the Eurostat’s classification server RAMON. The following basic information is provided by Eurostat: - reporting country, - reference period, - trade flow, - product, - trading partner - mode of transport. Detailed data are disseminated according to the Combined Nomenclature (HS2, HS4, HS6 and CN8 levels) for the following indicators: - trade value (in Euro), - trade quantity in 100 kg, - trade quantity in supplementary units (published for some goods according to the Combined Nomenclature). Aggregated data cover both short and long term indicators. Short term indicators are disseminated according to major SITC and BEC groups for the following indicators: - gross and seasonally adjusted trade value (in million Euro), - unit-value indices, - gross and seasonally adjusted volume indices, - growth rates of trade values and indices. Long term indicators are disseminated according to major SITC groups for the following indicators: - trade value (in billion Euro), - shares of Member States in EU and world trade, - shares of main trading partners in EU trade, - volume indices. Adjustments are applied by the Member States to compensate the impact of exemption thresholds, which release the information providers from statistical formalities, as well as, to take into account the late or not response of the providers. In addition, Eurostat applies seasonal adjustments to aggregated time series.
    • outubro 2019
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 17 outubro, 2019
      Selecionar Conjunto de dados
      International trade in goods statistics are an important data source for many public and private sector decision-makers at international, European Union and national level. For example, at the European Union level, international trade data are extensively used for multilateral and bilateral negotiations within the framework of the common commercial policy, to define and implement anti-dumping policy, to evaluate the progress of the Single Market and many other policies. Moreover, they constitute an essential source for the compilation of balance of payments statistics and national accounts. International trade in goods statistics cover both extra- and intra-EU trade: Extra-EU trade statistics cover the trading of goods between Member States and a non-member countries. Intra-EU trade statistics cover the trading of goods between Member States. "Goods" means all movable property including electricity. Detailed and aggregated data are published for the Euro area, the European Union and for each Member State separately. Main components: Data record the monthly trade between Member States in terms of arrivals and dispatches of goods as well as the monthly trade in terms of imports and exports between Member States and non-member countries. However, in publications only the term “exports” for all outward flows and “imports” for all inward flows are applied for both intra-EU trade and extra-EU trade. Extra-EU trade imports and exports are recorded in the Member State where the goods are placed under the customs procedures. Extra-EU trade statistics do not record goods in transit, goods placed into customs warehouses or goods for temporary admission. Data sources: The statistical information is mainly provided by the traders on the basis of Customs (extra-EU) and Intrastat (intra-EU) declarations. Data are collected by the competent national authorities of the Member States and compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Classification systems: - Product classification: For detailed data, products are disseminated according to the Combined Nomenclature (CN8), which first six digit codes coincide with the Harmonized Commodity Description and Coding System (HS), products are disseminated as well according to the Standard International Trade Classification (SITC) and the Broad Economic Categories (BEC). - Country classification: The Geonomenclature is used for classifying reporting countries and trading partners. Nomenclatures and correspondence tables are available at the Eurostat’s classification server RAMON. The following basic information is provided by Eurostat: - reporting country, - reference period, - trade flow, - product, - trading partner - mode of transport. Detailed data are disseminated according to the Combined Nomenclature (HS2, HS4, HS6 and CN8 levels) for the following indicators: - trade value (in Euro), - trade quantity in 100 kg, - trade quantity in supplementary units (published for some goods according to the Combined Nomenclature). Aggregated data cover both short and long term indicators. Short term indicators are disseminated according to major SITC and BEC groups for the following indicators: - gross and seasonally adjusted trade value (in million Euro), - unit-value indices, - gross and seasonally adjusted volume indices, - growth rates of trade values and indices. Long term indicators are disseminated according to major SITC groups for the following indicators: - trade value (in billion Euro), - shares of Member States in EU and world trade, - shares of main trading partners in EU trade, - volume indices. Adjustments are applied by the Member States to compensate the impact of exemption thresholds, which release the information providers from statistical formalities, as well as, to take into account the late or not response of the providers. In addition, Eurostat applies seasonal adjustments to aggregated time series.
    • outubro 2019
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 17 outubro, 2019
      Selecionar Conjunto de dados
      International trade in goods statistics are an important data source for many public and private sector decision-makers at international, European Union and national level. For example, at the European Union level, international trade data are extensively used for multilateral and bilateral negotiations within the framework of the common commercial policy, to define and implement anti-dumping policy, to evaluate the progress of the Single Market and many other policies. Moreover, they constitute an essential source for the compilation of balance of payments statistics and national accounts. International trade in goods statistics cover both extra- and intra-EU trade: Extra-EU trade statistics cover the trading of goods between Member States and a non-member countries. Intra-EU trade statistics cover the trading of goods between Member States. "Goods" means all movable property including electricity. Detailed and aggregated data are published for the Euro area, the European Union and for each Member State separately. Main components: Data record the monthly trade between Member States in terms of arrivals and dispatches of goods as well as the monthly trade in terms of imports and exports between Member States and non-member countries. However, in publications only the term “exports” for all outward flows and “imports” for all inward flows are applied for both intra-EU trade and extra-EU trade. Extra-EU trade imports and exports are recorded in the Member State where the goods are placed under the customs procedures. Extra-EU trade statistics do not record goods in transit, goods placed into customs warehouses or goods for temporary admission. Data sources: The statistical information is mainly provided by the traders on the basis of Customs (extra-EU) and Intrastat (intra-EU) declarations. Data are collected by the competent national authorities of the Member States and compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Classification systems: - Product classification: For detailed data, products are disseminated according to the Combined Nomenclature (CN8), which first six digit codes coincide with the Harmonized Commodity Description and Coding System (HS), products are disseminated as well according to the Standard International Trade Classification (SITC) and the Broad Economic Categories (BEC). - Country classification: The Geonomenclature is used for classifying reporting countries and trading partners. Nomenclatures and correspondence tables are available at the Eurostat’s classification server RAMON. The following basic information is provided by Eurostat: - reporting country, - reference period, - trade flow, - product, - trading partner - mode of transport. Detailed data are disseminated according to the Combined Nomenclature (HS2, HS4, HS6 and CN8 levels) for the following indicators: - trade value (in Euro), - trade quantity in 100 kg, - trade quantity in supplementary units (published for some goods according to the Combined Nomenclature). Aggregated data cover both short and long term indicators. Short term indicators are disseminated according to major SITC and BEC groups for the following indicators: - gross and seasonally adjusted trade value (in million Euro), - unit-value indices, - gross and seasonally adjusted volume indices, - growth rates of trade values and indices. Long term indicators are disseminated according to major SITC groups for the following indicators: - trade value (in billion Euro), - shares of Member States in EU and world trade, - shares of main trading partners in EU trade, - volume indices. Adjustments are applied by the Member States to compensate the impact of exemption thresholds, which release the information providers from statistical formalities, as well as, to take into account the late or not response of the providers. In addition, Eurostat applies seasonal adjustments to aggregated time series.
    • outubro 2019
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 17 outubro, 2019
      Selecionar Conjunto de dados
      International trade in goods statistics are an important data source for many public and private sector decision-makers at international, European Union and national level. For example, at the European Union level, international trade data are extensively used for multilateral and bilateral negotiations within the framework of the common commercial policy, to define and implement anti-dumping policy, to evaluate the progress of the Single Market and many other policies. Moreover, they constitute an essential source for the compilation of balance of payments statistics and national accounts. International trade in goods statistics cover both extra- and intra-EU trade: Extra-EU trade statistics cover the trading of goods between Member States and a non-member countries. Intra-EU trade statistics cover the trading of goods between Member States. "Goods" means all movable property including electricity. Detailed and aggregated data are published for the Euro area, the European Union and for each Member State separately. Main components: Data record the monthly trade between Member States in terms of arrivals and dispatches of goods as well as the monthly trade in terms of imports and exports between Member States and non-member countries. However, in publications only the term “exports” for all outward flows and “imports” for all inward flows are applied for both intra-EU trade and extra-EU trade. Extra-EU trade imports and exports are recorded in the Member State where the goods are placed under the customs procedures. Extra-EU trade statistics do not record goods in transit, goods placed into customs warehouses or goods for temporary admission. Data sources: The statistical information is mainly provided by the traders on the basis of Customs (extra-EU) and Intrastat (intra-EU) declarations. Data are collected by the competent national authorities of the Member States and compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Classification systems: - Product classification: For detailed data, products are disseminated according to the Combined Nomenclature (CN8), which first six digit codes coincide with the Harmonized Commodity Description and Coding System (HS), products are disseminated as well according to the Standard International Trade Classification (SITC) and the Broad Economic Categories (BEC). - Country classification: The Geonomenclature is used for classifying reporting countries and trading partners. Nomenclatures and correspondence tables are available at the Eurostat’s classification server RAMON. The following basic information is provided by Eurostat: - reporting country, - reference period, - trade flow, - product, - trading partner - mode of transport. Detailed data are disseminated according to the Combined Nomenclature (HS2, HS4, HS6 and CN8 levels) for the following indicators: - trade value (in Euro), - trade quantity in 100 kg, - trade quantity in supplementary units (published for some goods according to the Combined Nomenclature). Aggregated data cover both short and long term indicators. Short term indicators are disseminated according to major SITC and BEC groups for the following indicators: - gross and seasonally adjusted trade value (in million Euro), - unit-value indices, - gross and seasonally adjusted volume indices, - growth rates of trade values and indices. Long term indicators are disseminated according to major SITC groups for the following indicators: - trade value (in billion Euro), - shares of Member States in EU and world trade, - shares of main trading partners in EU trade, - volume indices. Adjustments are applied by the Member States to compensate the impact of exemption thresholds, which release the information providers from statistical formalities, as well as, to take into account the late or not response of the providers. In addition, Eurostat applies seasonal adjustments to aggregated time series.
    • outubro 2019
      Fonte: Eurostat
      Carregamento por: Knoema
      Acesso em 17 outubro, 2019
      Selecionar Conjunto de dados
      International trade in goods statistics are an important data source for many public and private sector decision-makers at international, European Union and national level. For example, at the European Union level, international trade data are extensively used for multilateral and bilateral negotiations within the framework of the common commercial policy, to define and implement anti-dumping policy, to evaluate the progress of the Single Market and many other policies. Moreover, they constitute an essential source for the compilation of balance of payments statistics and national accounts. International trade in goods statistics cover both extra- and intra-EU trade: Extra-EU trade statistics cover the trading of goods between Member States and a non-member countries. Intra-EU trade statistics cover the trading of goods between Member States. "Goods" means all movable property including electricity. Detailed and aggregated data are published for the Euro area, the European Union and for each Member State separately. Main components: Data record the monthly trade between Member States in terms of arrivals and dispatches of goods as well as the monthly trade in terms of imports and exports between Member States and non-member countries. However, in publications only the term “exports” for all outward flows and “imports” for all inward flows are applied for both intra-EU trade and extra-EU trade. Extra-EU trade imports and exports are recorded in the Member State where the goods are placed under the customs procedures. Extra-EU trade statistics do not record goods in transit, goods placed into customs warehouses or goods for temporary admission. Data sources: The statistical information is mainly provided by the traders on the basis of Customs (extra-EU) and Intrastat (intra-EU) declarations. Data are collected by the competent national authorities of the Member States and compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Classification systems: - Product classification: For detailed data, products are disseminated according to the Combined Nomenclature (CN8), which first six digit codes coincide with the Harmonized Commodity Description and Coding System (HS), products are disseminated as well according to the Standard International Trade Classification (SITC) and the Broad Economic Categories (BEC). - Country classification: The Geonomenclature is used for classifying reporting countries and trading partners. Nomenclatures and correspondence tables are available at the Eurostat’s classification server RAMON. The following basic information is provided by Eurostat: - reporting country, - reference period, - trade flow, - product, - trading partner - mode of transport. Detailed data are disseminated according to the Combined Nomenclature (HS2, HS4, HS6 and CN8 levels) for the following indicators: - trade value (in Euro), - trade quantity in 100 kg, - trade quantity in supplementary units (published for some goods according to the Combined Nomenclature). Aggregated data cover both short and long term indicators. Short term indicators are disseminated according to major SITC and BEC groups for the following indicators: - gross and seasonally adjusted trade value (in million Euro), - unit-value indices, - gross and seasonally adjusted volume indices, - growth rates of trade values and indices. Long term indicators are disseminated according to major SITC groups for the following indicators: - trade value (in billion Euro), - shares of Member States in EU and world trade, - shares of main trading partners in EU trade, - volume indices. Adjustments are applied by the Member States to compensate the impact of exemption thresholds, which release the information providers from statistical formalities, as well as, to take into account the late or not response of the providers. In addition, Eurostat applies seasonal adjustments to aggregated time series.

Nossa declaração de privacidade e política de cookies

O nosso website utiliza cookies para facilitar a sua experiência online. Eles foram salvos no seu computador quando você lançou este site. Você pode modificar suas configurações pessoais para cookies através das configurações do seu navegador de Internet.

Política de Privacidade