Eurostat

Please be aware that this indicator has been rescaled, i.e. data is expressed in relation to EU27_2020 = 100. Thus, they are not comparable with previous releases. Comparative price levels are the ratio between Purchasing power parities (PPPs) and market exchange rate for each country. PPPs are currency conversion rates that convert economic indicators expressed in national currencies to a common currency, called Purchasing Power Standard (PPS), which equalises the purchasing power of different national currencies and thus allows meaningful comparison. The ratio is shown in relation to the EU average (EU27_2020 = 100). If the index of the comparative price levels shown for a country is higher/ lower than 100, the country concerned is relatively expensive/cheap as compared with the EU average.

The Detailed Average Prices project provides average prices per country of up to 190 well defined consumer goods and services.

The industrial domestic output price index measures the average price development of all goods and related services resulting from the activity of the industry sector and sold on the domestic market. The domestic output price index shows the monthly development of transaction prices of economic activities. The domestic market is defined as customers resident in the same national territory as the observation unit. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Industrial producer prices are compiled as a "fixed base year Laspeyres type price-index". The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are presented in raw form.

This indicator presents electricity prices charged to final consumers. Electricity prices for non-household consumers are defined as follows: Average national price in Euro per kWh without taxes applicable for the first semester of each year for medium size industrial consumers (Consumption Band Ic with annual consumption between 500 and 2000 MWh). Electricity prices for household consumers are defined as follows: Average national price in Euro per kWh including taxes and levies applicable for the first semester of each year for medium size household consumers (Consumption Band Dc with annual consumption between 2500 and 5000 kWh).

The Harmonised Index of Consumer Prices (HICP) gives comparable measures of inflation for the countries and country groups for which it is produced. It is an economic indicator that measures the change over time of the prices of consumer goods and services acquired by households. In other words, it is a set of consumer price indices (CPI) calculated according to a harmonised approach and a set of definitions as laid down in Regulations and recommendations. In addition, the HICP provides the official measure of consumer price inflation in the euro area for the purposes of monetary policy and the assessment of inflation convergence as required under the Maastricht criteria for accession to the euro. The HICP is available for all EU Member States, Iceland, Norway and Switzerland. In addition to the individual country series there are three key country-group aggregate indices: the euro area, the European Union (EU), and the European Economic Area (EEA), which, in addition to the EU, also covers Iceland and Norway, but not Liechtenstein. The official country-group aggregates reflect the changing country composition of the EA, the EU and the EEA. The HICP for new Member States is chained into the aggregate indices at the time of accession. For analytical purposes Eurostat also computes country-group aggregates with stable country composition over time. For example, the EU28 aggregate shows price indices covering all current 28 Member States since 1997. The HICP for Serbia and Turkey (candidate countries) are also published. That data are flagged 'd' ('definition differs'). A proxy-HICP for the all-items and main aggregates is available for the USA. National HICPs are produced by National Statistical Institutes (NSIs), while the country-group aggregates are produced by Eurostat. The data released monthly on Eurostat's free dissemination database include price indices and rates of change (monthly, annual and 12-month moving average changes). In addition to the headline figure 'all-items HICP', around four hundred sub-indices for different goods and services and over thirty special aggregates are available, including the HICP at administered prices (HICP-AP). Once a year, with the release of the January data, the relative weights for the indices and the special aggregates, are published for the individual countries and for the European aggregates. The composition of the HICP-AP aggregates, i.e. which sub-indices are classified as mainly or fully administered by each Member State, is also updated at the same time. Eurostat publishes early estimates, called 'HICP flash estimates', of the euro area overall inflation rate and selected components. They are published monthly, usually on the last working day of the reference month, and disseminated in a news release, in the database and in a Statistics Explained article. The HICP at constant tax rates (HICP-CT) follows the same computation principles as the HICP, but is based on prices at constant tax rates. The comparison with the standard HICP can show the potential impact of changes in indirect taxes, such as VAT and excise duties, on the overall inflation (more information). Flags Flags provide information about the 'status' of the data or a specific data value. The following flags are used for the HICP data in the Eurostat online database: p = provisional data: Data is flagged as provisional by the National Statistical Institutes to signal that data are still being treated or validated. The 'p' flag remains attached to the HICP data values in question for one month only. r = revised data. In the case when the most recent figures published differ from previously disseminated data, they are flagged with 'r'. Countries are allowed to revise their HICP figures at any point and, therefore, revised figures may appear in historic data. The 'r' flag remains attached to the HICP data values in question for one month only. e = estimated data. All the figures of the HICP flash estimate are marked with the 'e' flag. d = definition differs, meaning that the national definition of a series differs from the ECOICOP (European Classification of Individual Consumption according to Purpose) definition. It is also used for data values from countries for which conformity with the requirements of the HICP methodology has not yet been evaluated by Eurostat, including candidate countries, pre-candidate countries, new EU Member States and the United States of America. u = unreliable data. Data is flagged as unreliable by the National Statistical Institutes.

Consumer price indices (CPIs) measure inflation as price changes of a representative basket of goods and services typically purchased by households. The G20 CPI aggregate reflects national CPIs for all G20 countries (with the exception of Turkey) that are not part of the European Union (EU) while it reflects the Harmonised Indices of Consumer Prices (HICP) for the EU, its Member States and for Turkey. It is an annual chain-linked Laspeyres-type index. The weights for each country in each link are based on the previous year’s relative share of individual final consumption expenditure of households and non-profit institutions serving households expressed in Purchasing Power Parities (PPPs). The table presents the data for all non-EU countries. The HICP tables for France, Germany, Italy, the United Kingdom, and the euro area and European Union can be found under the HICP tables.

This indicator presents the natural gas prices charged to final consumers. Natural gas prices for non-household consumers are defined as follows: Average national price in Euro per Giga Joule (GJ) without taxes applicable for the first semester of each year for medium size industrial consumers (Consumption Band I3 with annual consumption between 10 000 and 100 000 GJ). Natural gas prices for household consumers are defined as follows: Average national price in Euro per GJ including taxes and levies applicable for the first semester of each year for medium size household consumers (Consumption Band D2 with annual consumption between 20 and 200 GJ).

NEW METHODOLOGY (from 2007 onwards) Average half-yearly natural gas prices for households and industrial end-users. The end-users are characterised by predefined annual consumption bands.  The prices are collected and published considering three levels of taxation: prices excluding taxes and levies;prices excluding VAT and other recoverable taxes;prices including all taxes, levies and VAT   OLD METHODOLOGY (until 2007) Natural gas prices for households and industrial standard consumers, valid on 1st January and on 1st   July of each calendar year. Standard consumers are characterised by predefined annual consumption. The prices include gas basic price, transmission, system services, meter rental, distribution and other services. The prices are collected and published considering three levels of taxation (see above under new methodology): For structural indicators tables, where only annual data is displayed both for new and old methodology in the same table, the prices refer to the price on 1st January of each year (until 2007) and to the first semester of each year (2008 and later).For further details see : Data on energy prices are collected according to Directive 2008/92/EC of the European Parliament and of the Council of 22 October 2008 concerning a Community procedure to improve the transparency of gas and electricity prices charged to industrial end-users (recast) (Text with EEA relevance). Data for gas prices for household end-users are collected on a voluntary basis Gas prices are presented at national level for the Members of the European Union (except Cyprus and Malta for industrial end users, expect Cyprus (is not providing data for households), Malta and Finland, EFTA-country Liechtenstein, Candidate countries (except The former Yugoslav Republic of Macedonia, Albania for households and except Albania for industrial end-users), Potential candidate country Kosovo (under UNSCR 1244/1999). 

NEW METHODOLOGY (from 2007 onwards) Average half-yearly natural gas prices for households and industrial end-users. The end-users are characterised by predefined annual consumption bands.  The prices are collected and published considering three levels of taxation: prices excluding taxes and levies;prices excluding VAT and other recoverable taxes;prices including all taxes, levies and VAT   OLD METHODOLOGY (until 2007) Natural gas prices for households and industrial standard consumers, valid on 1st January and on 1st   July of each calendar year. Standard consumers are characterised by predefined annual consumption. The prices include gas basic price, transmission, system services, meter rental, distribution and other services. The prices are collected and published considering three levels of taxation (see above under new methodology): For structural indicators tables, where only annual data is displayed both for new and old methodology in the same table, the prices refer to the price on 1st January of each year (until 2007) and to the first semester of each year (2008 and later).For further details see : Data on energy prices are collected according to Directive 2008/92/EC of the European Parliament and of the Council of 22 October 2008 concerning a Community procedure to improve the transparency of gas and electricity prices charged to industrial end-users (recast) (Text with EEA relevance). Data for gas prices for household end-users are collected on a voluntary basis Gas prices are presented at national level for the Members of the European Union (except Cyprus and Malta for industrial end users, expect Cyprus (is not providing data for households), Malta and Finland, EFTA-country Liechtenstein, Candidate countries (except The former Yugoslav Republic of Macedonia, Albania for households and except Albania for industrial end-users), Potential candidate country Kosovo (under UNSCR 1244/1999). 

Regional accounts are a regional specification of the national accounts and therefore based on the same concepts and definitions as national accounts (see domain nama10). The main specific regional issues are addressed in chapter 13 of ESA2010, but not practically specified. For practical rules and recommendations on sources and methods see the publication "Manual on regional accounts methods": http://ec.europa.eu/eurostat/en/web/products-manuals-and-guidelines/-/KS-GQ-13-001 . Gross domestic product (GDP) at market prices is the final result of the production activity of resident producer units. It can be defined in three ways: 1. Output approach GDP is the sum of gross value added of the various institutional sectors or the various industries plus taxes and less subsidies on products (which are not allocated to sectors and industries). It is also the balancing item in the total economy production account. 2. Expenditure approach GDP is the sum of final uses of goods and services by resident institutional units (final consumption expenditure and gross capital formation), plus exports and minus imports of goods and services. At regional level the expenditure approach cannot be used in the EU, because there is no data on regional exports and imports.  3. Income approach GDP is the sum of uses in the total economy generation of income account: compensation of employees plus gross operating surplus and mixed income plus taxes on products less subsidies plus consumption of fixed capital. The different measures for the regional GDP are absolute figures in € and Purchasing Power Standards (PPS), figures per inhabitant and relative data compared to the EU28 average.

Regional accounts are a regional specification of the national accounts and therefore based on the same concepts and definitions as national accounts (see domain nama10). The main specific regional issues are addressed in chapter 13 of ESA2010, but not practically specified. For practical rules and recommendations on sources and methods see the publication "Manual on regional accounts methods": http://ec.europa.eu/eurostat/en/web/products-manuals-and-guidelines/-/KS-GQ-13-001 . Gross domestic product (GDP) at market prices is the final result of the production activity of resident producer units. It can be defined in three ways: 1. Output approach GDP is the sum of gross value added of the various institutional sectors or the various industries plus taxes and less subsidies on products (which are not allocated to sectors and industries). It is also the balancing item in the total economy production account. 2. Expenditure approach GDP is the sum of final uses of goods and services by resident institutional units (final consumption expenditure and gross capital formation), plus exports and minus imports of goods and services. At regional level the expenditure approach cannot be used in the EU, because there is no data on regional exports and imports.  3. Income approach GDP is the sum of uses in the total economy generation of income account: compensation of employees plus gross operating surplus and mixed income plus taxes on products less subsidies plus consumption of fixed capital. The different measures for the regional GDP are absolute figures in € and Purchasing Power Standards (PPS), figures per inhabitant and relative data compared to the EU Member States average.

Unemployed persons comprise here persons aged 25 to 74 who were without work during the reference week, were currently available for work and were either actively seeking work in the past four weeks or had already found a job to start within the next three months.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICPs) are designed for international comparisons of consumer price inflation. HICP is used for example by the European Central Bank for monitoring of inflation in the Economic and Monetary Union and for the assessment of inflation convergence as required under Article 121 of the Treaty of Amsterdam. For the U.S. and Japan national consumer price indices are used in the table.

The Harmonised Index of Consumer Prices (HICP) gives comparable measures of inflation for the countries and country groups for which it is produced. It is an economic indicator that measures the change over time of the prices of consumer goods and services acquired by households. In other words, it is a set of consumer price indices (CPI) calculated according to a harmonised approach and a set of definitions as laid down in Regulations and recommendations. In addition, the HICP provides the official measure of consumer price inflation in the euro area for the purposes of monetary policy and the assessment of inflation convergence as required under the Maastricht criteria for accession to the euro. The HICP is available for all EU Member States, Iceland, Norway and Switzerland. In addition to the individual country series there are three key country-group aggregate indices: the euro area, the European Union (EU), and the European Economic Area (EEA), which, in addition to the EU, also covers Iceland and Norway, but not Liechtenstein. The official country-group aggregates reflect the changing country composition of the EA, the EU and the EEA. The HICP for new Member States is chained into the aggregate indices at the time of accession. For analytical purposes Eurostat also computes country-group aggregates with stable country composition over time. For example, the EU28 aggregate shows price indices covering all current 28 Member States since 1997. The HICP for Serbia and Turkey (candidate countries) are also published. That data are flagged 'd' ('definition differs'). A proxy-HICP for the all-items and main aggregates is available for the USA. National HICPs are produced by National Statistical Institutes (NSIs), while the country-group aggregates are produced by Eurostat. The data released monthly on Eurostat's free dissemination database include price indices and rates of change (monthly, annual and 12-month moving average changes). In addition to the headline figure 'all-items HICP', around four hundred sub-indices for different goods and services and over thirty special aggregates are available, including the HICP at administered prices (HICP-AP). Once a year, with the release of the January data, the relative weights for the indices and the special aggregates, are published for the individual countries and for the European aggregates. The composition of the HICP-AP aggregates, i.e. which sub-indices are classified as mainly or fully administered by each Member State, is also updated at the same time. Eurostat publishes early estimates, called 'HICP flash estimates', of the euro area overall inflation rate and selected components. They are published monthly, usually on the last working day of the reference month, and disseminated in a news release, in the database and in a Statistics Explained article. The HICP at constant tax rates (HICP-CT) follows the same computation principles as the HICP, but is based on prices at constant tax rates. The comparison with the standard HICP can show the potential impact of changes in indirect taxes, such as VAT and excise duties, on the overall inflation (more information). Flags Flags provide information about the 'status' of the data or a specific data value. The following flags are used for the HICP data in the Eurostat online database: p = provisional data: Data is flagged as provisional by the National Statistical Institutes to signal that data are still being treated or validated. The 'p' flag remains attached to the HICP data values in question for one month only. r = revised data. In the case when the most recent figures published differ from previously disseminated data, they are flagged with 'r'. Countries are allowed to revise their HICP figures at any point and, therefore, revised figures may appear in historic data. The 'r' flag remains attached to the HICP data values in question for one month only. e = estimated data. All the figures of the HICP flash estimate are marked with the 'e' flag. d = definition differs, meaning that the national definition of a series differs from the ECOICOP (European Classification of Individual Consumption according to Purpose) definition. It is also used for data values from countries for which conformity with the requirements of the HICP methodology has not yet been evaluated by Eurostat, including candidate countries, pre-candidate countries, new EU Member States and the United States of America. u = unreliable data. Data is flagged as unreliable by the National Statistical Institutes.

The House Price Index (HPI) measures inflation in the residential property market. The HPI captures price changes of all kinds of residential property purchased by households (flats, detached houses, terraced houses, etc.), both new and existing. Only market prices are considered, self-build dwellings are therefore excluded. The land component of the residential property is included. These indices are the result of the work that National Statistical Institutes (NSIs) have been doing mostly within the framework of the Owner-Occupied Housing (OOH) pilot project coordinated by Eurostat. HPI is available for EU Member States, Iceland and Norway. In addition to the individual country series Eurostat produces indices for the euro area and for the EU. The national HPIs are produced by NSIs, while the European aggregates are computed by Eurostat, by aggregating the national indices. The data released quarterly on Eurostat's website include price indices themselves as well as their rates of change compared to the same quarter of the previous year. House Sales cover the total value of dwellings transactions at national level (both houses and flats) where the purchaser is a household. House Sales indicators complement the data on the HPI in order to offer a more comprehensive picture of the housing market. At this moment Eurostat is publishing the annual index for the value of housing transactions and the annual rate of change.

The House Price Index (HPI) measures price changes of all residential properties purchased by households (flats, detached houses, terraced houses, etc.), both new and existing, independently of their final use and their previous owners. Only market prices are considered, self-build dwellings are therefore excluded. The land component is included.

The industrial import price index (IPI) measures the monthly transaction price development of imported goods purchased from non-domestic areas by domestic residents. IPI permits monthly monitoring of prices for different categories of products or group of products. They are also a means to distinguish real growth of imports from price changes in the foreign trade statistics and in the national accounts. Data are compiled according to the Classification of Products by Activity (CPA). The breakdowns are based on aggregates derived from the MIGs (Main Industrial Groupings). Industrial import prices are compiled as a fixed base year Laspeyres type price-index (except for Luxembourg). The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are compiled from raw data.

The industrial import price index (IPI) measures the monthly transaction price development of imported goods purchased from non-domestic areas by domestic residents. IPI permits monthly monitoring of prices for different categories of products or group of products. They are also a means to distinguish real growth of imports from price changes in the foreign trade statistics and in the national accounts. Data are compiled according to the Classification of Products by Activity (CPA). The breakdowns are based on aggregates derived from the MIGs (Main Industrial Groupings). Industrial import prices are compiled as a fixed base year Laspeyres type price-index (except for Luxembourg). The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are compiled from raw data.

The industrial import price index (IPI) measures the monthly transaction price development of imported goods purchased from non-domestic areas by domestic residents. IPI permits monthly monitoring of prices for different categories of products or group of products. They are also a means to distinguish real growth of imports from price changes in the foreign trade statistics and in the national accounts. Data are compiled according to the Classification of Products by Activity (CPA). The breakdowns are based on aggregates derived from the MIGs (Main Industrial Groupings). Industrial import prices are compiled as a fixed base year Laspeyres type price-index (except for Luxembourg). The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are compiled from raw data.

The industrial import price index (IPI) measures the monthly transaction price development of imported goods purchased from non-domestic areas by domestic residents. IPI permits monthly monitoring of prices for different categories of products or group of products. They are also a means to distinguish real growth of imports from price changes in the foreign trade statistics and in the national accounts. Data are compiled according to the Classification of Products by Activity (CPA). The breakdowns are based on aggregates derived from the MIGs (Main Industrial Groupings). Industrial import prices are compiled as a fixed base year Laspeyres type price-index (except for Luxembourg). The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are compiled from raw data.

The industrial import price index (IPI) measures the monthly transaction price development of imported goods purchased from non-domestic areas by domestic residents. IPI permits monthly monitoring of prices for different categories of products or group of products. They are also a means to distinguish real growth of imports from price changes in the foreign trade statistics and in the national accounts. Data are compiled according to the Classification of Products by Activity (CPA). The breakdowns are based on aggregates derived from the MIGs (Main Industrial Groupings). Industrial import prices are compiled as a fixed base year Laspeyres type price-index (except for Luxembourg). The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are compiled from raw data.

The industrial import price index (IPI) measures the monthly transaction price development of imported goods purchased from non-domestic areas by domestic residents. IPI permits monthly monitoring of prices for different categories of products or group of products. They are also a means to distinguish real growth of imports from price changes in the foreign trade statistics and in the national accounts. Data are compiled according to the Classification of Products by Activity (CPA). The breakdowns are based on aggregates derived from the MIGs (Main Industrial Groupings). Industrial import prices are compiled as a fixed base year Laspeyres type price-index (except for Luxembourg). The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are compiled from raw data.

Owners occupiers are those households that live in a dwelling (flat, house) that they own. Owner occupier's housing expenditures represent those expenditures incurred by owners occupiers when purchasing, maintaining and living in their own home. The Owner-Occupied Housing Price Index (OOHPI) measures the change over time in the transaction prices of dwellings that were purchased for own-use and the cost of all goods and services that households purchase in their role as owners occupiers of dwellings (see classification below). As the index is based on the net acquisitions approach, only purchased dwellings that are new to the household sector are covered, while transactions between households are excluded (see section 3.4 Statistical concepts and definitions) . These indices are the result of the work that National Statistical Institutes (NSIs) have been doing since 2001 within the framework of the Owner-Occupied Housing (OOH) pilot project coordinated by Eurostat. OOHPIs are available for 26 EU Member States, plus Iceland and Norway (published for 27 countries). The data that is released quarterly on Eurostat's website include price indices themselves as well as their rates of change compared to the previous quarter (Qt-1) and the same quarter of the previous year (Qt-4).

Owners occupiers are those households that live in a dwelling (flat, house) that they own. Owner occupier's housing expenditures represent those expenditures incurred by owners occupiers when purchasing, maintaining and living in their own home. The Owner-Occupied Housing Price Index (OOHPI) measures the change over time in the transaction prices of dwellings that were purchased for own-use and the cost of all goods and services that households purchase in their role as owners occupiers of dwellings (see classification below). As the index is based on the net acquisitions approach, only purchased dwellings that are new to the household sector are covered, while transactions between households are excluded (see section 3.4 Statistical concepts and definitions) . These indices are the result of the work that National Statistical Institutes (NSIs) have been doing since 2001 within the framework of the Owner-Occupied Housing (OOH) pilot project coordinated by Eurostat. OOHPIs are available for 26 EU Member States, plus Iceland and Norway (published for 27 countries). The data that is released quarterly on Eurostat's website include price indices themselves as well as their rates of change compared to the previous quarter (Qt-1) and the same quarter of the previous year (Qt-4).

Owners occupiers are those households that live in a dwelling (flat, house) that they own. Owner occupier's housing expenditures represent those expenditures incurred by owners occupiers when purchasing, maintaining and living in their own home. The Owner-Occupied Housing Price Index (OOHPI) measures the change over time in the transaction prices of dwellings that were purchased for own-use and the cost of all goods and services that households purchase in their role as owners occupiers of dwellings (see classification below). As the index is based on the net acquisitions approach, only purchased dwellings that are new to the household sector are covered, while transactions between households are excluded (see section 3.4 Statistical concepts and definitions) . These indices are the result of the work that National Statistical Institutes (NSIs) have been doing since 2001 within the framework of the Owner-Occupied Housing (OOH) pilot project coordinated by Eurostat. OOHPIs are available for 26 EU Member States, plus Iceland and Norway (published for 27 countries). The data that is released quarterly on Eurostat's website include price indices themselves as well as their rates of change compared to the previous quarter (Qt-1) and the same quarter of the previous year (Qt-4).

Comparative price levels are the ratio between Purchasing power parities (PPPs) and market exchange rate for each country. PPPs are currency conversion rates that convert economic indicators expressed in national currencies to a common currency, called Purchasing Power Standard (PPS), which equalises the purchasing power of different national currencies and thus allows meaningful comparison. If the coefficient of variation of the comparative price levels for the EU decreases/increases over time, the national price levels in the Member States are converging/diverging.

The EU Agricultural Price Indices (output and input) comprise:the index of producer prices of agricultural products;the index of purchase prices of the means of agricultural production. The purpose of the price indices is to provide information on trends in producer prices of agricultural products and purchase prices of the means of agricultural production. They are intended to permit a comparison of these trends both between the various Member States and the European Union as a whole and between the different products within a Member State or the European Union. They are also intended to facilitate comparisons between trends in producer prices and trends in purchase prices of the means of agricultural production. They cannot, however, express differences between the Member States in terms of absolute agricultural price levels The following points should be borne in mind when interpreting the EU Agricultural Price Indices:As regards spatial comparisons, the structures of the weights with respect to products and means of production reflect the value of the sales and purchases in each country during the base year. The weights therefore differ from one country to another and this obviously has an effect on trends in the aggregate indices.In comparing the trends in output prices with those in input prices, the field of observation of the latter does not cover, as will be seen later, the whole of the operating expenditure of the agricultural sector.The comparison between quarterly price indices can be made only between the corresponding quarters of different years. The reason is the variation of the weights from quarter to quarter for the output products. In the majority of Member States, national indices of agricultural prices may differ from the EU Agricultural Price Indices in respect of their base, formula or field of observation. Please take note that, currently, 2010=100 EU28 aggregation does not include Estonia.

The EU Agricultural Price Indices (output and input) comprise: the index of producer prices of agricultural products;the index of purchase prices of the means of agricultural production.The purpose of the price indices is to provide information on trends in producer prices of agricultural products and purchase prices of the means of agricultural production. They are intended to permit a comparison of these trends both between the various Member States and the European Union as a whole and between the different products within a Member State or the European Union. They are also intended to facilitate comparisons between trends in producer prices and trends in purchase prices of the means of agricultural production. They cannot, however, express differences between the Member States in terms of absolute agricultural price levels The following points should be borne in mind when interpreting the EU Agricultural Price Indices: As regards spatial comparisons, the structures of the weights with respect to products and means of production reflect the value of the sales and purchases in each country during the base year. The weights therefore differ from one country to another and this obviously has an effect on trends in the aggregate indices.In comparing the trends in output prices with those in input prices, the field of observation of the latter does not cover, as will be seen later, the whole of the operating expenditure of the agricultural sector.The comparison between quarterly price indices can be made only between the corresponding quarters of different years. The reason is the variation of the weights from quarter to quarter for the output products. In the majority of Member States, national indices of agricultural prices may differ from the EU Agricultural Price Indices in respect of their base, formula or field of observation. Please take note that, currently, 2010=100 EU28 aggregation does not include Estonia.

The EU Agricultural Price Indices (output and input) comprise: the index of producer prices of agricultural products;the index of purchase prices of the means of agricultural production.The purpose of the price indices is to provide information on trends in producer prices of agricultural products and purchase prices of the means of agricultural production. They are intended to permit a comparison of these trends both between the various Member States and the European Union as a whole and between the different products within a Member State or the European Union. They are also intended to facilitate comparisons between trends in producer prices and trends in purchase prices of the means of agricultural production. They cannot, however, express differences between the Member States in terms of absolute agricultural price levels The following points should be borne in mind when interpreting the EU Agricultural Price Indices: As regards spatial comparisons, the structures of the weights with respect to products and means of production reflect the value of the sales and purchases in each country during the base year. The weights therefore differ from one country to another and this obviously has an effect on trends in the aggregate indices.In comparing the trends in output prices with those in input prices, the field of observation of the latter does not cover, as will be seen later, the whole of the operating expenditure of the agricultural sector.The comparison between quarterly price indices can be made only between the corresponding quarters of different years. The reason is the variation of the weights from quarter to quarter for the output products. In the majority of Member States, national indices of agricultural prices may differ from the EU Agricultural Price Indices in respect of their base, formula or field of observation. Please take note that, currently, 2010=100 EU28 aggregation does not include Estonia.

The EU Agricultural Price Indices (output and input) comprise:the index of producer prices of agricultural products;the index of purchase prices of the means of agricultural production. The purpose of the price indices is to provide information on trends in producer prices of agricultural products and purchase prices of the means of agricultural production. They are intended to permit a comparison of these trends both between the various Member States and the European Union as a whole and between the different products within a Member State or the European Union. They are also intended to facilitate comparisons between trends in producer prices and trends in purchase prices of the means of agricultural production. They cannot, however, express differences between the Member States in terms of absolute agricultural price levels The following points should be borne in mind when interpreting the EU Agricultural Price Indices:As regards spatial comparisons, the structures of the weights with respect to products and means of production reflect the value of the sales and purchases in each country during the base year. The weights therefore differ from one country to another and this obviously has an effect on trends in the aggregate indices.In comparing the trends in output prices with those in input prices, the field of observation of the latter does not cover, as will be seen later, the whole of the operating expenditure of the agricultural sector.The comparison between quarterly price indices can be made only between the corresponding quarters of different years. The reason is the variation of the weights from quarter to quarter for the output products. In the majority of Member States, national indices of agricultural prices may differ from the EU Agricultural Price Indices in respect of their base, formula or field of observation. Please take note that, currently, 2010=100 EU28 aggregation does not include Estonia.

The EU Agricultural Price Indices (output and input) comprise: the index of producer prices of agricultural products;the index of purchase prices of the means of agricultural production.The purpose of the price indices is to provide information on trends in producer prices of agricultural products and purchase prices of the means of agricultural production. They are intended to permit a comparison of these trends both between the various Member States and the European Union as a whole and between the different products within a Member State or the European Union. They are also intended to facilitate comparisons between trends in producer prices and trends in purchase prices of the means of agricultural production. They cannot, however, express differences between the Member States in terms of absolute agricultural price levels The following points should be borne in mind when interpreting the EU Agricultural Price Indices: As regards spatial comparisons, the structures of the weights with respect to products and means of production reflect the value of the sales and purchases in each country during the base year. The weights therefore differ from one country to another and this obviously has an effect on trends in the aggregate indices.In comparing the trends in output prices with those in input prices, the field of observation of the latter does not cover, as will be seen later, the whole of the operating expenditure of the agricultural sector.The comparison between quarterly price indices can be made only between the corresponding quarters of different years. The reason is the variation of the weights from quarter to quarter for the output products. In the majority of Member States, national indices of agricultural prices may differ from the EU Agricultural Price Indices in respect of their base, formula or field of observation. Please take note that, currently, 2010=100 EU28 aggregation does not include Estonia.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Constructions (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Producer (output) prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Purchasing power parities (PPPs) are indicators of price level differences across countries. PPPs tell us how many currency units a given quantity of goods and services costs in different countries. PPPs can thus be used as currency conversion rates to convert expenditures expressed in national currencies into an artificial common currency (the Purchasing Power Standard, PPS), eliminating the effect of price level differences across countries. The main use of PPPs is to convert national accounts aggregates, like the Gross Domestic Product (GDP) of different countries, into comparable volume aggregates. Applying nominal exchange rates in this process would overestimate the GDP of countries with high price levels relative to countries with low price levels. The use of PPPs ensures that the GDP of all countries is valued at a uniform price level and thus reflects only differences in the actual volume of the economy. PPPs are also applied in analyses of relative price levels across countries. For this purpose, the PPPs are divided by the current nominal exchange rate to obtain a price level index (PLI) which expresses the price level of a given country relative to another, or relative to a group of countries like the EU Member States. The production of PPPs is a multilateral exercise involving the National Statistical Institutes of the participating countries, Eurostat and the OECD. Indicators in Eurostat's dissemination database The indicators published in the price domain on Eurostat's website are the following: Purchasing power parities (PPPs) scaled to the sum of expenditures of the EU Member States expressed in euro. This means that the PPP of one particular country indicates how many units of national currency one would need in that country in order to maintain the purchasing power of one euro in the EUPrice level indices (PLIs) as defined aboveNominal expenditure in national currency, as extracted from each country's national accountsNominal expenditure as percentage of GDPNominal expenditure in euroNominal expenditure per inhabitant in euroReal expenditure, defined as nominal expenditure divided by the PPPReal expenditure per inhabitantVolume indices of real expenditure per inhabitantThe convergence indicators, defined as the coefficient of variation of the price level indices (PLIs) and per capita volume indices (VIs) of gross domestic product (GDP), actual individual consumption (AIC) and household final consumption expenditure (HFCE). It measures the price and volume convergence across countries. In addition, PPPs and real expenditures are available from the national accounts domain of the database. For further details, cf. 17.1.

The absolute prices in this table give information on the levels of the producer prices of the product. Prices are net of VAT.

The absolute prices in this table give information on the levels of the producer prices of the product. Prices are net of VAT.

The absolute prices in this table give information on the levels of the producer prices of the product. Prices are net of VAT.

The absolute prices in this table give information on the levels of the producer prices of the product. Prices are net of VAT.

The absolute prices in this table give information on the levels of the producer prices of the product. Prices are net of VAT.

The absolute prices in this table give information on the levels of the producer prices of the product. Prices are net of VAT.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.