República Democrática Popular da Coreia do Norte

This dataset present the Balanced Trade in Services (BaTIS) dataset published by OECD. It is a complete, consistent and balanced matrix of international trade in services statistics (ITSS). It contains annual bilateral data covering 202 reporters and partners, broken down by the 12 main EBOPS2010 (BPM6) categories.

Preliminary Release: China's Total Export & Import Values ​​by Country/Region (in USD)

Data cited at: Direction of Trade Statistics, The International Monetary Fund. The Direction of Trade Statistics (DOTS) presents current figures on the value of merchandise exports and imports dis-aggregated according to a country's primary trading partners. Area and world aggregates are included in the display of trade flows between major areas of the world. Reported data is supplemented by estimates whenever such data is not available or current. Imports are reported on a cost, insurance and freight (CIF) basis and exports are reported on a free on board (FOB) basis, with the exception of a few countries for which imports are also available FOB. Time series data includes estimates derived from reports of partner countries for non-reporting and slow-reporting countries.

The indicator is defined as the value (at current prices) of EU imports from developing countries. In this context, developing countries are defined as the countries on the OECD Development Assistance Committee (DAC) list of official development assistance beneficiaries. The indicator is presented broken down by income groups of partner countries, as distinguished by the DAC list. Please note that these groups are not static over time, as countries can change groups.

International trade in goods statistics are an important data source for many public and private sector decision-makers at international, European Union and national level. For example, at the European Union level, international trade data are extensively used for multilateral and bilateral negotiations within the framework of the common commercial policy, to define and implement anti-dumping policy, to evaluate the progress of the Single Market and many other policies. Moreover, they constitute an essential source for the compilation of balance of payments statistics and national accounts. International trade in goods statistics cover both extra- and intra-EU trade: Extra-EU trade statistics cover the trading of goods between Member States and a non-member countries. Intra-EU trade statistics cover the trading of goods between Member States. "Goods" means all movable property including electricity. Detailed and aggregated data are published for the Euro area, the European Union and for each Member State separately. Main components: Data record the monthly trade between Member States in terms of arrivals and dispatches of goods as well as the monthly trade in terms of imports and exports between Member States and non-member countries. However, in publications only the term “exports” for all outward flows and “imports” for all inward flows are applied for both intra-EU trade and extra-EU trade. Extra-EU trade imports and exports are recorded in the Member State where the goods are placed under the customs procedures. Extra-EU trade statistics do not record goods in transit, goods placed into customs warehouses or goods for temporary admission. Data sources: The statistical information is mainly provided by the traders on the basis of Customs (extra-EU) and Intrastat (intra-EU) declarations. Data are collected by the competent national authorities of the Member States and compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Classification systems: - Product classification: For detailed data, products are disseminated according to the Combined Nomenclature (CN8), which first six digit codes coincide with the Harmonized Commodity Description and Coding System (HS), products are disseminated as well according to the Standard International Trade Classification (SITC) and the Broad Economic Categories (BEC). - Country classification: The Geonomenclature is used for classifying reporting countries and trading partners. Nomenclatures and correspondence tables are available at the Eurostat’s classification server RAMON. The following basic information is provided by Eurostat: - reporting country, - reference period, - trade flow, - product, - trading partner - mode of transport. Detailed data are disseminated according to the Combined Nomenclature (HS2, HS4, HS6 and CN8 levels) for the following indicators: - trade value (in Euro), - trade quantity in 100 kg, - trade quantity in supplementary units (published for some goods according to the Combined Nomenclature). Aggregated data cover both short and long term indicators. Short term indicators are disseminated according to major SITC and BEC groups for the following indicators: - gross and seasonally adjusted trade value (in million Euro), - unit-value indices, - gross and seasonally adjusted volume indices, - growth rates of trade values and indices. Long term indicators are disseminated according to major SITC groups for the following indicators: - trade value (in billion Euro), - shares of Member States in EU and world trade, - shares of main trading partners in EU trade, - volume indices. Adjustments are applied by the Member States to compensate the impact of exemption thresholds, which release the information providers from statistical formalities, as well as, to take into account the late or not response of the providers. In addition, Eurostat applies seasonal adjustments to aggregated time series.

20.1. Source data

20.1. Source data

Foreign Trade Statistics of Namibia

Data cited at: https://data.gov.om/OMFRTRD2016 this Data set covers the statistical indicators illustrating the development of trade between Oman and other countries, and classification of  merchandise exports, re-exports and merchandise imports by commodity group, nature of materials, their final utilization and port of entry.  It includes also a table on of the balance of payments estimates.   The commodity classification used in the presentation of foreign trade data is the Hormonised System, which has been adopted in Oman since 1987, in addition to the SITC Revision (4) for international comparison.  Commodity values are estimated in Rial Omani on the basis of the (C.I.F.) value for imports (i.e. the cost, insurance and freight of goods to the custom points in Oman) and (F.O.B.) for exports and re-exports.

National Accounts of Costa Rica

ANNUAL Annual data on quantities for crude oil, petroleum products, natural gas and manufactures gases, electricity and derived heat, solid fossil fuels, renewables and wastes covering the full spectrum of the energy sector from supply through transformation to final consumption oby sector and fuel type. Also, annual imports and exports data of various energy carriers by country of origin and destination, as well as infrastructure information. Data on annual statistics are collected by standard questionnaires according to Annex B of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics   MONTHLY The monthly energy data collections cover the most important energy commodities: Crude oil & Petroleum productsNatural gasSolid fuelsElectricity For each of the above mentioned commodities the inflowing data are delivered by the reporting countries to Eurostat via separate dedicated questionnaires. Data on monthly statistics are collected by standard questionnaires according to Annex C of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics   SHORT-TERM MONTHLY Short-term monthly energy data collections cover the most important energy commodities: Oil & petroleum productsNatural gasElectricity Short-term monthly data provides information on main flows (quantities) on the supply side. Data on monthly short term statistics are collected by standard questionnaires according to Annex D of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics

The industrial import price index (IPI) measures the monthly transaction price development of imported goods purchased from non-domestic areas by domestic residents. IPI permits monthly monitoring of prices for different categories of products or group of products. They are also a means to distinguish real growth of imports from price changes in the foreign trade statistics and in the national accounts. Data are compiled according to the Classification of Products by Activity (CPA). The breakdowns are based on aggregates derived from the MIGs (Main Industrial Groupings). Industrial import prices are compiled as a fixed base year Laspeyres type price-index (except for Luxembourg). The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are compiled from raw data.

The industrial import price index (IPI) measures the monthly transaction price development of imported goods purchased from non-domestic areas by domestic residents. IPI permits monthly monitoring of prices for different categories of products or group of products. They are also a means to distinguish real growth of imports from price changes in the foreign trade statistics and in the national accounts. Data are compiled according to the Classification of Products by Activity (CPA). The breakdowns are based on aggregates derived from the MIGs (Main Industrial Groupings). Industrial import prices are compiled as a fixed base year Laspeyres type price-index (except for Luxembourg). The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are compiled from raw data.

The industrial import price index (IPI) measures the monthly transaction price development of imported goods purchased from non-domestic areas by domestic residents. IPI permits monthly monitoring of prices for different categories of products or group of products. They are also a means to distinguish real growth of imports from price changes in the foreign trade statistics and in the national accounts. Data are compiled according to the Classification of Products by Activity (CPA). The breakdowns are based on aggregates derived from the MIGs (Main Industrial Groupings). Industrial import prices are compiled as a fixed base year Laspeyres type price-index (except for Luxembourg). The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are compiled from raw data.

The industrial import price index (IPI) measures the monthly transaction price development of imported goods purchased from non-domestic areas by domestic residents. IPI permits monthly monitoring of prices for different categories of products or group of products. They are also a means to distinguish real growth of imports from price changes in the foreign trade statistics and in the national accounts. Data are compiled according to the Classification of Products by Activity (CPA). The breakdowns are based on aggregates derived from the MIGs (Main Industrial Groupings). Industrial import prices are compiled as a fixed base year Laspeyres type price-index (except for Luxembourg). The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are compiled from raw data.

The industrial import price index (IPI) measures the monthly transaction price development of imported goods purchased from non-domestic areas by domestic residents. IPI permits monthly monitoring of prices for different categories of products or group of products. They are also a means to distinguish real growth of imports from price changes in the foreign trade statistics and in the national accounts. Data are compiled according to the Classification of Products by Activity (CPA). The breakdowns are based on aggregates derived from the MIGs (Main Industrial Groupings). Industrial import prices are compiled as a fixed base year Laspeyres type price-index (except for Luxembourg). The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are compiled from raw data.

The industrial import price index (IPI) measures the monthly transaction price development of imported goods purchased from non-domestic areas by domestic residents. IPI permits monthly monitoring of prices for different categories of products or group of products. They are also a means to distinguish real growth of imports from price changes in the foreign trade statistics and in the national accounts. Data are compiled according to the Classification of Products by Activity (CPA). The breakdowns are based on aggregates derived from the MIGs (Main Industrial Groupings). Industrial import prices are compiled as a fixed base year Laspeyres type price-index (except for Luxembourg). The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are compiled from raw data.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Imports are recorded by country of origin, exports by country of destination; quantities are regarded as imported or exported when they have crossed the political boundaries of the country, whether customs clearance has taken place or not.  The concept of the physical movement of flows applies. The monthly imports and exports data collections cover following energy commodities:solid  fuels (hard coal only)oil and petroleum productsgaselectricity      For solid fuels, crude oil and NGLs, imports and exports are reported by country of ultimate origin, respectively destination, while natural gas, refinery products and feedstocks as well as electricity are reported as coming from the country of last consignment. Quantities of crude oil and petroleum products imported or exported under processing agreements (i.e. refining on account) should be included. However, transit trade, international marine and aviation bunkers are excluded from this data set. Please note that this is different from the definition of natural gas trade in the annual gas questionnaire and from the definition in the previous monthly oil and gas questionnaire (before January 2013). For further information, please consult the Energy Statistics Regulation (Regulation (EC) 1099/2008 on energy statistics) and the reporting instructions. Monthly imports and exports of energy commodities cover the full spectrum of the 28 Member States of the European Union, EFTA States, candidate countries and potential candidates. Â

Imports are recorded by country of origin, exports by country of destination; quantities are regarded as imported or exported when they have crossed the political boundaries of the country, whether customs clearance has taken place or not.  The concept of the physical movement of flows applies. The monthly imports and exports data collections cover following energy commodities:solid  fuels (hard coal only)oil and petroleum productsgaselectricity      For solid fuels, crude oil and NGLs, imports and exports are reported by country of ultimate origin, respectively destination, while natural gas, refinery products and feedstocks as well as electricity are reported as coming from the country of last consignment. Quantities of crude oil and petroleum products imported or exported under processing agreements (i.e. refining on account) should be included. However, transit trade, international marine and aviation bunkers are excluded from this data set. Please note that this is different from the definition of natural gas trade in the annual gas questionnaire and from the definition in the previous monthly oil and gas questionnaire (before January 2013). For further information, please consult the Energy Statistics Regulation (Regulation (EC) 1099/2008 on energy statistics) and the reporting instructions. Monthly imports and exports of energy commodities cover the full spectrum of the 28 Member States of the European Union, EFTA States, candidate countries and potential candidates.

ANNUAL Annual data on quantities for crude oil, petroleum products, natural gas and manufactures gases, electricity and derived heat, solid fossil fuels, renewables and wastes covering the full spectrum of the energy sector from supply through transformation to final consumption oby sector and fuel type. Also, annual imports and exports data of various energy carriers by country of origin and destination, as well as infrastructure information. Data on annual statistics are collected by standard questionnaires according to Annex B of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics   MONTHLY The monthly energy data collections cover the most important energy commodities: Crude oil & Petroleum productsNatural gasSolid fuelsElectricity For each of the above mentioned commodities the inflowing data are delivered by the reporting countries to Eurostat via separate dedicated questionnaires. Data on monthly statistics are collected by standard questionnaires according to Annex C of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics   SHORT-TERM MONTHLY Short-term monthly energy data collections cover the most important energy commodities: Oil & petroleum productsNatural gasElectricity Short-term monthly data provides information on main flows (quantities) on the supply side. Data on monthly short term statistics are collected by standard questionnaires according to Annex D of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics

International trade statistics cover any movements of goods between the EU Member States and non-member countries (extra-EU trade), and from one Member State to another (intra-EU trade). Goods are physical, produced items over which ownership rights can be established and whose economic ownership can be passed from one institutional unit to another by engaging in transactions. The product breakdowns available in Newcronos/Euro-indicators are based on aggregates derived from the Broad Economic Categories (BEC) classification and the Standard International Trade Classification (SITC).

International trade statistics cover any movements of goods between the EU Member States and non-member countries (extra-EU trade), and from one Member State to another (intra-EU trade). Goods are physical, produced items over which ownership rights can be established and whose economic ownership can be passed from one institutional unit to another by engaging in transactions. The product breakdowns available in Newcronos/Euro-indicators are based on aggregates derived from the Broad Economic Categories (BEC) classification and the Standard International Trade Classification (SITC).

International trade statistics cover any movements of goods between the EU Member States and non-member countries (extra-EU trade), and from one Member State to another (intra-EU trade). Goods are physical, produced items over which ownership rights can be established and whose economic ownership can be passed from one institutional unit to another by engaging in transactions. The product breakdowns available in Newcronos/Euro-indicators are based on aggregates derived from the Broad Economic Categories (BEC) classification and the Standard International Trade Classification (SITC).

International trade statistics cover any movements of goods between the EU Member States and non-member countries (extra-EU trade), and from one Member State to another (intra-EU trade). Goods are physical, produced items over which ownership rights can be established and whose economic ownership can be passed from one institutional unit to another by engaging in transactions. The product breakdowns available in Newcronos/Euro-indicators are based on aggregates derived from the Broad Economic Categories (BEC) classification and the Standard International Trade Classification (SITC).

International trade statistics cover any movements of goods between the EU Member States and non-member countries (extra-EU trade), and from one Member State to another (intra-EU trade). Goods are physical, produced items over which ownership rights can be established and whose economic ownership can be passed from one institutional unit to another by engaging in transactions. The product breakdowns available in Newcronos/Euro-indicators are based on aggregates derived from the Broad Economic Categories (BEC) classification and the Standard International Trade Classification (SITC).

International trade statistics cover any movements of goods between the EU Member States and non-member countries (extra-EU trade), and from one Member State to another (intra-EU trade). Goods are physical, produced items over which ownership rights can be established and whose economic ownership can be passed from one institutional unit to another by engaging in transactions. The product breakdowns available in Newcronos/Euro-indicators are based on aggregates derived from the Broad Economic Categories (BEC) classification and the Standard International Trade Classification (SITC).

International trade statistics cover any movements of goods between the EU Member States and non-member countries (extra-EU trade), and from one Member State to another (intra-EU trade). 'Goods' means all movable property, including electric current.

This indicator is the value of imports of goods and services divided by the GDP in current prices.

ANNUAL Annual data on quantities for crude oil, petroleum products, natural gas and manufactures gases, electricity and derived heat, solid fossil fuels, renewables and wastes covering the full spectrum of the energy sector from supply through transformation to final consumption oby sector and fuel type. Also, annual imports and exports data of various energy carriers by country of origin and destination, as well as infrastructure information. Data on annual statistics are collected by standard questionnaires according to Annex B of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics   MONTHLY The monthly energy data collections cover the most important energy commodities: Crude oil & Petroleum productsNatural gasSolid fuelsElectricity For each of the above mentioned commodities the inflowing data are delivered by the reporting countries to Eurostat via separate dedicated questionnaires. Data on monthly statistics are collected by standard questionnaires according to Annex C of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics   SHORT-TERM MONTHLY Short-term monthly energy data collections cover the most important energy commodities: Oil & petroleum productsNatural gasElectricity Short-term monthly data provides information on main flows (quantities) on the supply side. Data on monthly short term statistics are collected by standard questionnaires according to Annex D of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics

ANNUAL Annual data on quantities for crude oil, petroleum products, natural gas and manufactures gases, electricity and derived heat, solid fossil fuels, renewables and wastes covering the full spectrum of the energy sector from supply through transformation to final consumption oby sector and fuel type. Also, annual imports and exports data of various energy carriers by country of origin and destination, as well as infrastructure information. Data on annual statistics are collected by standard questionnaires according to Annex B of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics   MONTHLY The monthly energy data collections cover the most important energy commodities: Crude oil & Petroleum productsNatural gasSolid fuelsElectricity For each of the above mentioned commodities the inflowing data are delivered by the reporting countries to Eurostat via separate dedicated questionnaires. Data on monthly statistics are collected by standard questionnaires according to Annex C of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics   SHORT-TERM MONTHLY Short-term monthly energy data collections cover the most important energy commodities: Oil & petroleum productsNatural gasElectricity Short-term monthly data provides information on main flows (quantities) on the supply side. Data on monthly short term statistics are collected by standard questionnaires according to Annex D of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics

ANNUAL Annual data on quantities for crude oil, petroleum products, natural gas and manufactures gases, electricity and derived heat, solid fossil fuels, renewables and wastes covering the full spectrum of the energy sector from supply through transformation to final consumption oby sector and fuel type. Also, annual imports and exports data of various energy carriers by country of origin and destination, as well as infrastructure information. Data on annual statistics are collected by standard questionnaires according to Annex B of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics   MONTHLY The monthly energy data collections cover the most important energy commodities: Crude oil & Petroleum productsNatural gasSolid fuelsElectricity For each of the above mentioned commodities the inflowing data are delivered by the reporting countries to Eurostat via separate dedicated questionnaires. Data on monthly statistics are collected by standard questionnaires according to Annex C of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics   SHORT-TERM MONTHLY Short-term monthly energy data collections cover the most important energy commodities: Oil & petroleum productsNatural gasElectricity Short-term monthly data provides information on main flows (quantities) on the supply side. Data on monthly short term statistics are collected by standard questionnaires according to Annex D of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

International trade in services, quarterly by imports and exports, country and time

Imports are expressed in value terms and measured cif (cost, insurance, freight). Exports are expressed in value terms and measured fob (free on board). Balance = export - import

Imports are expressed in value terms and measured cif (cost, insurance, freight). Exports are expressed in value terms and measured fob (free on board). Balance = export - import

Imports are expressed in value terms and measured cif (cost, insurance, freight). Exports are expressed in value terms and measured fob (free on board). Balance = export - import

Imports are expressed in value terms and measured cif (cost, insurance, freight). Exports are expressed in value terms and measured fob (free on board). Balance = export - import

Imports are expressed in value terms and measured cif (cost, insurance, freight). Exports are expressed in value terms and measured fob (free on board). Balance = export - import

Data cited at:  CBS StatLine databank https://opendata.cbs.nl/statline/portal.html?_la=en&_catalog=CBS Publication: International trade; import and export value, SITC (3 digits), countries https://opendata.cbs.nl/portal.html?_la=en&_catalog=CBS&tableId=83926ENG&_theme=1017 License: http://creativecommons.org/licenses/by/4.0/   In this dataset the Dutch import, export value, trade balance and annual changes are broken down into sections, divisions and groups according to the Standard International Trade Classification (SITC). The data are further divided into continents and countries according to the Geonomenclature (GEONOM).

Australia's international merchandise trade statistics record goods which add to or subtract from the stock of material resources of Australia by entering (imports) or leaving (exports) its territory. Goods simply transported through Australia (goods in transit), or temporarily admitted or withdrawn, do not add to or subtract from Australia's stock of material resources and are not included in Australia's international merchandise trade statistics.

Value of imports and exports by BEC (Broad Economic Categories), country, imports and exports and time

Value of exports by SHORT-TERM (industrial origin), country, imports and exports and time

This dataset provides trade and tariff data for countries where the reporter is "World".

Unit-values are defined by: trade value / quantity. These unit-values are divided by the average unit-value of the previous year to obtain elementary unit-value indices, from which outliers are detected and removed. Elementary unit-value indices are then aggregated over countries and commodities, by using formulae. Finally, the unit-value indices are chained back to the reference year (2015 = 100) and used to approximate the import and export price movements.

US trade, at district level, of Iron and Steel:   Total Exports: -The sum of domestic and foreign exports. Domestic Exports : -Exports of goods that are grown, produced, or manufactured in the United States and commodities of foreign origin that have been changed in the United States, including changes made in a US Foreign Trade Zone, from the form in which they were imported, or which have been enhanced in value by further processing or manufacturing in the United States. Foreign Exports: -Exports of foreign goods (re-exports) consist of commodities of foreign origin that have previously been admitted to US Foreign Trade Zones or entered the United States for consumption, including entry into a CBP bonded warehouse, and which, at the time of exportation, are in substantially the same condition as when imported.   Note: Data is available from 2013 onward.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.